Skip to main content
Log in

Influence of Cr and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire nial composites

  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

Sapphire-reinforced NiAl matrix composites with chromium or tungsten as alloying additions were synthesized using casting and zone directional solidification (DS) techniques and characterized by a fiber pushout test as well as by microhardness measurements. The sapphire-NiAl(Cr) specimens exhibited an interlayer of Cr rich eutectic at the fiber-matrix interface and a higher interfacial shear strength compared to unalloyed sapphire-NiAl specimens processed under identical conditions. In contrast, the sapphire-NiAl(W) specimens did not show interfacial excess of tungsten rich phases, although the interfacial shear strength was high and comparable to that of sapphire-NiAl(Cr). The postdebond sliding stress was higher in sapphire-NiAl(Cr) than in sapphire-NiAl(W) due to interface enrichment with chromium particles. The matrix microhardness progressively decreased with increasing distance from the interface in both DS NiAl and NiAl(Cr) specimens. The study highlights the potential of casting and DS techniques to improve the toughness and strength of NiAl by designing dual-phase microstructures in NiAl alloys reinforced with sapphire fibers.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Darolia:J. Met., 1991, vol. 43 (3), p. 44.

    CAS  Google Scholar 

  2. R.D. Noebe, A. Misra, and R. Gibala:J. Iron Steel Inst. Jpn., 1991, 31, 1172–1186.

    CAS  Google Scholar 

  3. R.D. Noebe, R.R. Bowman, and J.I. Eldridge: Intermetallic Matrix Composites, Materials Research Society Symposia Proceedings, D.L. Anton, R. McMeeking, D. Miracle, and P. Martin, eds., p. Materials Research Society, Pittsburgh, PA, vol. 194, p. 323–331.

  4. J.W. Pickens, R.D. Noebe, G.K. Watson, P.K. Brindley, and SX. Draper:NASA TM 102060, 1989.

  5. S.N. Tewari, R. Asthana, and R.D. Noebe:Metall. Trans. A, 1993, vol. 24A, pp. 2119–25.

    CAS  Google Scholar 

  6. R. Asthana, S.N. Tewari, and R.R. Bowman:Metall. Mater. Trans. A, 1995, vol. 26A, p. 209–223.

    CAS  Google Scholar 

  7. D. Xu, D. Wang, and T.L. Lin:Scripta Metall., 1993, vol. 26, p. 599.

    Google Scholar 

  8. S.L. Draper, D.J. Gaydosh, and M.V. Nathal:J. Mater. Res., 1990, vol. 5, p. 1976.

    CAS  Google Scholar 

  9. S. Nourbakhsh, O. Sahin, W.H. Rhee, and H. Margolin:Metall. Trans. A, 1991, vol. 22A, pp. 3059–64.

    CAS  Google Scholar 

  10. R.M. Crispin and M. Nicholas:J. Mater. Sci., 1976, vol. 11, p. 17.

    Article  CAS  Google Scholar 

  11. M. Nicholas:J. Mater. Sci., 1968, vol. 3, p. 571.

    Article  CAS  Google Scholar 

  12. S.N. Tewari: NASA TN D 8355, 1977.

  13. R. Johnson, S.M. Joslin, B.F. Oliver, R.D. Noebe, and J.D. Whittenberger:Intermetallic Matrix Composites II, Materials Research Society Symposia Proceedings, D.B. Miracle, J. Graves, and D. Anton, eds, Materials Research Society, Pittsburgh, PA, 1992, vol. 273, p. 87–92.

    Google Scholar 

  14. J.I. Eldridge: NASA TM 105341, 1991.

  15. A.K. Misra: NASA CR 191167, 1993.

  16. D.A. Koss, M.N. Kallas, and J.R. Hellman:Intermetallic Matrix Composites II, Materials Research Society Symposia Proceedings, D.B. Miracle, J. Graves, and D. Anton, eds, Material Research Society, Pittsburgh, PA, 1992, vol. 273, p. 303.

    Google Scholar 

  17. M.N. Kallas, D.A. Koss, H.T. Hahn, and J.R. Hellman:J. Mater. Sci., 1992, vol. 27 (4), p. 3821.

    Article  CAS  Google Scholar 

  18. Metals Handbook, 8th ed., ASM, Metals Park, OH, 1961, vol. 1, p. 48.

  19. S. Ochiai and K. Osamura:Metall. Trans. A, 1988, vol. 19A, pp. 1499 1506.

    Google Scholar 

  20. S.L. Draper and I.E. Locci:J. Mater. Res., 1994, vol. 9 (6), p. 1397–1411.

    CAS  Google Scholar 

  21. “Sapphire and Advanced Single Crystal Technologies” (Data Sheet), Saphikon Inc., Milford, NH.

  22. R.R. Bowman, I.E. Locci, S.L. Draper, and A.K. Misra:Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1994, vol. 350, p. 105–110.

    Google Scholar 

  23. R.R. Bowman, A.K. Misra, and I.E. Locci:NASA HITEMP Proc, NASA CP 19117, 1993, vol. II, p. 57–1.

    Google Scholar 

  24. A.B. Gokhale, L. Lu, and R. Abbaschian: inSolidification of Metal Matrix Composites, P. Rohatgi, ed., TMS, Warrendale, PA, 1990.

    Google Scholar 

  25. R.R. Bowman:Intermetallic Matrix Composites II, Materials Research Society Symposia Proceedings, D.B. Miracle, J. Graves, and D. Anton, eds., Materials Research Society, Pittsburgh, PA, 1992, vol. 273, p. 145.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

R. TIWARI, formerly Research Associate, Department of Chemical Engineering, Cleveland State University

Rights and permissions

Reprints and permissions

About this article

Cite this article

Asthana, R., Tiwari, R. & Tewari, S.N. Influence of Cr and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire nial composites. Metall Mater Trans A 26, 2175–2184 (1995). https://doi.org/10.1007/BF02670688

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02670688

Keywords

Navigation