Summaries
Low VOC joinery wood coatings with different moisture permeability were tested in relation to dimensional changes, moisture content and performance after weathering. A permanent decrease in dimensions of coated wood and a linear correlation with moisture content was found. Coating permeability only partly relates to cracking, flaking and surface mould growth, due to the uncoated backside of the samples and differences in coating formulation.
Résumé
Des revêtements à faible teneur en solvants organiques volatils pour menuiserie en bois et ayant diverses permeabilités à l’humidité ont ete évalués à l’égard des changements dimensionnels, de la teneur en humidité et résistance aux intempéries. On a trouvé un rapport entre une diminution permanente des dimensions des éléments en bois revêtus, Parceque le revers des échantillons était nu et les diverses formulations des revêtements, fissuration, écaillage et formation de moisissures sont attribuables en partie à la perméabilité du revêtement.
Zusammenfassung
Niedrig-VOC-Bescichtungsstoffe für Holztischlerei mit verschiedenen Feuchtigkeitspermeabilität wurden für Veränderung der Dimensionen, Feuchtigkeitsgehalt und Leistung bei Außenbenwitterung geprüft. Ein lineares Verhaltnis zwischen dem Feuchtigkeitsgehalt und einer ständige Ruckgang der Dimensionen des aufgetragenen Holzes wurd gefunden. Aufgrund der nichtaufgetragenen Ruckseite der Prüfplatte und der verschiedenen Beschichtungsstoffsrezepturen verbindet sixh der Beschichtungsstoffsfeuchtigkeit nur teilweise zu Rißbildung, Abblätern und oberflächliche Schimmelbildung.
Similar content being viewed by others
References
Ahola P, Derbyshire H, Hora G and de Meijer M,Holz als Roh- und Werkstoff,57, 45–50, 1999.
Ahola P,Holz als Roh- und Werkstoff,49, 428–432, 1991.
Ekstedt J, ‘Moisture dynamic assessment of coatings for exterior wood’,Licentiate Thesis Kungliga Tekniska Högskolan, Stockholm, 1995.
Hora G, Böttcher P,Farbe und Lack,11, 924–928, 1993.
Huldén M, Hansen CM,Progress in Organic Coatings,13, 171–194, 1985.
ISO standard 4628-4, ‘Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking’, 1982.
ISO 4628-5, ‘Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking’, 1982.
Institut für Fenstertechnik e.V. (Hrgb.), ‘Richtlinie 1 Feuchteschutz von Holz durch Anstrichsysteme zum Merkblatt, Anstrichsysteme für Holzfenster’, Fenster und Fassade,2, 1991.
de Meijer M, Creemers J, Cobben W and Ahola P,International Research Group on wood preservation, 98-40121, Maastricht, 1998.
Perrera DY,Proceedings XXIV th Fatipec Conference, Interlaken, 1998.
prEN 927-3, Paints and varnishes — Coating materials and coating systems for exterior wood — Part 3: Natural weathering test, 1995.
Rypstra T, ‘Analytical techniques for evaluation of wood and wood finishes during weathering, PhD-thesis’,University of Stellenbosch, pp. 243, 1995.
SKH-publication 95-01, ‘Assesment criteria for the use of coatings on wood (Beoordelingsgrondslag voor de toepassing van verf op hout)’,Stichting Keuringsbureau Hout, Huizen, 1995.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
de Meijer, M., Creemers, J. & Cobben, W. Relationships between the performance of low-VOC wood coatings and the dimensional changes of the wooden substrate. Surface Coatings International Part B: Coatings Transactions 84, 77–85 (2001). https://doi.org/10.1007/BF02699700
Issue Date:
DOI: https://doi.org/10.1007/BF02699700