Abstract
Several groups of cold-rolled, high-strength sheet steels have been developed to optimize the required strength and formability levels for automotive applications. Multiphase steels offer new opportunities where high-strength levels are demanded. The future in steel development will be determined by the physical modeling of properties and by adapting new process routes such as thin slab casting and in-line rolling. In this article, developments in traditional strengthening concepts (e.g., microalloying and substitutional hardening with phosphorus) and more recently developed concepts (e.g., bake hardening and strengthening of interstitial-free steels) are reviewed.
Similar content being viewed by others
References
L. Hamm, “Stahl-ein zukunftst rächtiger Werkstoff im Karosseriebau?” (Paper presented at the IISI 27th Annual Meeting and Conference, Paris, 1993).
W. Bleck, “Anforderungen an Karosseriewerkstoffe,” Stahl und Eisen, 115 (1995), pp. 55–63.
W. Zimnik et al., “Factors Influencing Planar Anisotropy of Batch-Annealed Cold Strip,” Steel Research, 64 (1993), pp. 420–424.
B. Engl, K. Freier, and K.-P. Imlau, Cost-Effective and EcolOgical Light Weight Construction with Steel: Proceedings of a Conference, Report 12351995 (Wolfsburg, Germany: VDI) pp. 17–46.
W. Bleck, W.W. Müschenborn, and L. Meyer, “Recrystallization and Mechanical Properties of Microalloyed Cold-Rolled Steels,” Steel Research, 59 (1988), pp. 344–351.
W. Bleck et al., “Development of Hot-Dip Galvanized Higher-Strength Steels with Good Cold Forming Properties,” Thyssen Technische Berichte, 21 (1989), pp. 197–211.
L. Meyer, W. Bleck, and W. Müschenbom, “ProductOriented IF Steel Design,” International Forum for Physical Metallurgy of IF Steels (Tokyo: Iron and Steel Institute of Japan, 1994), pp. 249–268.
W. Bleck et al., “Metallurgical Design of High-Strength ULC Steels,” High-Strength Steels for Automotive Symposium Proceedings (Warrendale, PA: ISS, 1994), pp. 141–148.
J.R. Fekete, D.C. Strugala, and Z. Yao, “Advanced Sheet Steels for Automotive Applications,” JOM, 44 (1) (1992), pp. 17–21.
P. Elsen and H.P. Hougardy, “On the Mechanism of Bake-Hardening,” Steel Research, 64 (1993), pp. 685–692.
K. Ushioda et al., “Application of Ultra Low-Carbon Steels to the Development of Superformable Sheet Steels, Solution-Hardened High Strength Sheet Steels and BakeHardenable Sheet Steels,” International Forum for Physical Metallurgy of IF Steels (Tokyo: Iron and Steel Institute of Japan, 1994), pp. 227–244.
K. Sugimoto et al., “Warm Stretch-Formability of TRIP-Aided Dual-Phase Sheet Steels,” ISIJ International, 35 (1995), pp. 1407–1414.
K. Yamazaki et al., Recent Advances in Ultrahigh-Strength Sheet Steels for Automotive Structural Use, Nippon Steel Technical Report 64 (1995), pp. 37–44.
W.F. Hosford and R.M. Caddell, Metal Forming, Mechanics and Metallurgy, 2nd ed. (Englewood Cliffs, NJ: PTR Prentice Hall, 1993).
P. Nilles, “Qualitätsaspekte Beirn Endabmessungsnahen GieΒen,” Stahl und Eisen, 113 (1993), pp. 53–60.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bleck, W. Cold-rolled, high-strength sheet steels for auto applications. JOM 48, 26–30 (1996). https://doi.org/10.1007/BF03222991
Issue Date:
DOI: https://doi.org/10.1007/BF03222991