Stabilization of SnO₂ ultrafine particles by additives

Abstract

In order to stabilize ultrafine particles of SnO₂ which is essential to obtain high gas sensitivity, a systematic investigation was undertaken regarding the stabilizing effects of 5 at% impregnated foreign additives, consisting of oxides or polyoxy compounds of 31 metals and 3 non-metals. The data of specific surface area, SA, as well as SnO₂ crystallite size, D, evaluated from X-ray diffraction showed that the additives could be classified into several groups according to the effectiveness. The most effective group, consisting of P-Ba, Sm, Ba, P, Mo, W, Ca, Sr, Cr and In, could keepD less than 10 nm even after calcination at 900°C, whereas pure SnO₂ underwent grain growth to haveD of 13 and 27 nm at 600 and 900°C, respectively. Electron microscopy revealed that neck sizes, X, between crystallites were fairly proportional toD(X/D = 0.80). A simple analysis of SA and D data based on a monosized sphere model suggested that each crystallite was coordinated with 3–4.5 neighbours through the necks. The existing state and stabilizing mechanism of additives are discussed in conjunction with the electrical resistance of porously sintered elements.