nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

19.06.2020 | ORIGINAL ARTICLE

A review on in situ monitoring technology for directed energy deposition of metals

verfasst von: Zi-jue Tang, Wei-wei Liu, Yi-wen Wang, Kaze Mojtaba Saleheen, Zhi-chao Liu, Shi-tong Peng, Zhao Zhang, Hong-chao Zhang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 11-12/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Directed energy deposition (DED) is an important additive manufacturing method for producing or repairing high-end and high-value equipment. Meanwhile, the lack of reliable and uniform qualities is a key problem in DED applications. With the development of sensing devices and control systems, in situ monitoring (IM) and adaptive control (IMAC) technology is an effective method to enhance the reliability and repeatability of DED. In this paper, we review current IM technologies in IMAC for metal DED. First, this paper describes the important sensing signals and equipment to exhibit the research status in detail. Meanwhile, common problems that arise when gathering these signals and resolvent methods are presented. Second, process signatures obtained from sensing signals and transfer approaches from sensing signals for processing signatures are shown. Third, this work reviews the developments of the IM of product qualities and illustrates ways to realize quality monitoring. Lastly, this paper specifies the main existing problems and future research of IM in metal DED.

Vorheriger Artikel Development of a novel rectangular–circular grid filling pattern of fused deposition modeling in cellular lattice structures

Nächster Artikel Spark plasma sintering and structural analysis of nickel-titanium/coconut shell powder metal matrix composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ko H, Moon SK, Hwang J (2015) Design for additive manufacturing in customized products. Int J Precis Eng Manuf 16(11):2369–2375. https://doi.org/10.1007/s12541-015-0305-9 CrossRef

Yao X, Moon SK, Bi G (2016) A cost-driven design methodology for additive manufactured variable platforms in product families. J Mech Des 138(4):041701. https://doi.org/10.1115/1.4032504 CrossRef

Wohlers T, Caffrey T, Campbell RI, Diegel O, Kowen J (2019) Wohlers report 2019: 3D printing and additive manufacturing state of the industry. Wohlers Associates.

ISO/ASTM 52900 Additive manufacturing — general principles — terminology (2017). ISO/TC 261; ASTM F42. Geneva.

Standard guide for directed energy deposition of metals (2016). vol F3187-16. ASTM International, West Conshohocken, PA.

Ding D, Pan Z, Cuiuri D, Li H (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol 81(1-4):465–481. https://doi.org/10.1007/s00170-015-7077-3 CrossRef

Wang X, Deng D, Hu Y, Ning F, Wang H, Cong W, Zhang H (2018) Overhang structure and accuracy in laser engineered net shaping of Fe-Cr steel. Opt Laser Technol 106:357–365. https://doi.org/10.1016/j.optlastec.2018.04.015 CrossRef

Chen Z, Ye H, Xu H (2018) Distortion control in a wire-fed electron-beam thin-walled Ti-6Al-4 V freeform. J Mater Process Technol 258:286–295. https://doi.org/10.1016/j.jmatprotec.2018.04.008 CrossRef

Mcandrew AR, Rosales MA, Colegrove PA, Hönnige JR, Ho A, Fayolle R, Eyitayo K, Stan I, Sukrongpang P, Crochemore A (2018) Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement. Addit Manuf 21:340–349. https://doi.org/10.1016/j.addma.2018.03.006 CrossRef

10.

Song L, Bagavath-Singh V, Dutta B, Mazumder J (2012) Control of melt pool temperature and deposition height during direct metal deposition process. Int J Adv Manuf Technol 58(1-4):247–256. https://doi.org/10.1007/s00170-011-3395-2 CrossRef

11.

Liu W-W, Tang Z-J, Liu X-Y, Wang H-J, Zhang H-C (2017) A review on in-situ monitoring and adaptive control technology for laser cladding remanufacturing. Procedia CIRP 61:235–240. https://doi.org/10.1016/j.procir.2016.11.217 CrossRef

12.

Tapia G, Elwany A (2014) A review on process monitoring and control in metal-based additive manufacturing. J Manuf Sci Eng 136(6):060801. https://doi.org/10.1115/1.4028540 CrossRef

13.

Everton SK, Hirsch M, Stravroulakis P, Leach RK, Clare AT (2016) Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Mater Des 95:431–445. https://doi.org/10.1016/j.matdes.2016.01.099 CrossRef

14.

Chua ZY, Ahn IH, Moon SK (2017) Process monitoring and inspection systems in metal additive manufacturing: status and applications. Int J Precis Eng Manuf Green Technol 4(2):235–245. https://doi.org/10.1007/s40684-017-0029-7 CrossRef

15.

Yan Z, Liu W, Tang Z, Liu X, Zhang N, Li M, Zhang H (2018) Review on thermal analysis in laser-based additive manufacturing. Opt Laser Technol 106:427–441. https://doi.org/10.1016/j.optlastec.2018.04.034 CrossRef

16.

Bandyopadhyay A, Traxel KD (2018) Invited review article: metal-additive manufacturing - modeling strategies for application-optimized designs. Addit Manuf 22:758–774. https://doi.org/10.1016/j.addma.2018.06.024 CrossRef

17.

He W, Shi W, Li J, Xie H (2019) In-situ monitoring and deformation characterization by optical techniques; part I: laser-aided direct metal deposition for additive manufacturing. Opt Laser Eng 122:74–88. https://doi.org/10.1016/j.optlaseng.2019.05.020 CrossRef

18.

Shamsaei N, Yadollahi A, Bian L, Thompson SM (2015) An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control. Addit Manuf 8:12–35. https://doi.org/10.1016/j.addma.2015.07.002 CrossRef

19.

Mani M, Lane BM, Donmez MA, Feng SC, Moylan SP (2016) A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. Int J Prod Res 55(5):1400–1418. https://doi.org/10.1080/00207543.2016.1223378 CrossRef

20.

Spears TG, Gold SA (2016) In-process sensing in selective laser melting (SLM) additive manufacturing. Integr Mater Manuf Innov 5:16–40. https://doi.org/10.1186/s40192-016-0045-4 CrossRef

21.

Grasso M, Colosimo BM (2017) Process defects and in situ monitoring methods in metal powder bed fusion: a review. Meas Sci Technol 28(4):044005. https://doi.org/10.1088/1361-6501/aa5c4f CrossRef

22.

Malekipour E, El-Mounayri H (2017) Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review. Int J Adv Manuf Technol 95(1-4):527–550. https://doi.org/10.1007/s00170-017-1172-6 CrossRef

23.

García-Díaz A, Panadeiro V, Lodeiro B, Rodríguez-Araújo J, Stavridis J, Papacharalampopoulos A, Stavropoulos P (2018) OpenLMD, an open source middleware and toolkit for laser-based additive manufacturing of large metal parts. Rob Comput Integr Manuf 53:153–161. https://doi.org/10.1016/j.rcim.2018.04.006 CrossRef

24.

Bi G, Gasser A, Wissenbach K, Drenker A, Poprawe R (2006) Identification and qualification of temperature signal for monitoring and control in laser cladding. Opt Laser Eng 44(12):1348–1359. https://doi.org/10.1016/j.optlaseng.2006.01.009 CrossRef

25.

Lei JB, Wang Z, Liu LF (2010) Design of forming shape measurement system for laser molten pool in laser fabricating. Appl Mec Mater 37:327–330. https://doi.org/10.4028/www.scientific.net/AMM.37-38.327 CrossRef

26.

Bi G, Schürmann B, Gasser A, Wissenbach K, Poprawe R (2007) Development and qualification of a novel laser-cladding head with integrated sensors. Int J Mach Tools Manuf 47(3-4):555–561. https://doi.org/10.1016/j.ijmachtools.2006.05.010 CrossRef

27.

Song L, Wang F, Li S, Han X (2017) Phase congruency melt pool edge extraction for laser additive manufacturing. J Mater Process Technol 250:261–269. https://doi.org/10.1016/j.jmatprotec.2017.07.013 CrossRef

28.

Rodriguez-Araujo J, Rodriguez-Andina JJ, Farina J, Vidal F, Mato JL, Montealegre MA (2012) Industrial laser cladding systems: FPGA-based adaptive control. IEEE Ind Electron Mag 6(4):35–46. https://doi.org/10.1109/mie.2012.2221356 CrossRef

29.

Ocylok S, Alexeev E, Mann S, Weisheit A, Wissenbach K, Kelbassa I (2014) Correlations of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring. Phys Procedia 56:228–238. https://doi.org/10.1016/j.phpro.2014.08.167 CrossRef

30.

Miyagi M, Tsukamoto T, Kawanaka H (2014) Adaptive shape control of laser-deposited metal structures by adjusting weld pool size. J Laser Appl 26(3):032003. https://doi.org/10.2351/1.4869499 CrossRef

31.

Hofman JT, Pathiraj B, van Dijk J, de Lange DF, Meijer J (2012) A camera based feedback control strategy for the laser cladding process. J Mater Process Technol 212(11):2455–2462. https://doi.org/10.1016/j.jmatprotec.2012.06.027 CrossRef

32.

Kriczky DA, Irwin J, Reutzel EW, Michaleris P, Nassar AR, Craig J (2015) 3D spatial reconstruction of thermal characteristics in directed energy deposition through optical thermal imaging. J Mater Process Technol 221:172–186. https://doi.org/10.1016/j.jmatprotec.2015.02.021 CrossRef

33.

Moralejo S, Penaranda X, Nieto S, Barrios A, Arrizubieta I, Tabernero I, Figueras J (2016) A feedforward controller for tuning laser cladding melt pool geometry in real time. Int J Adv Manuf Technol 89(1-4):821–831. https://doi.org/10.1007/s00170-016-9138-7 CrossRef

34.

Farahmand P, Kovacevic R (2014) An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser. Opt Laser Technol 63:154–168. https://doi.org/10.1016/j.optlastec.2014.04.016 CrossRef

35.

Lei K, Qin X, Liu H, Ni M (2018) Analysis and modeling of melt pool morphology for high power diode laser cladding with a rectangle beam spot. Opt Laser Eng 110:89–99. https://doi.org/10.1016/j.optlaseng.2018.05.022 CrossRef

36.

Ding Y, Warton J, Kovacevic R (2016) Development of sensing and control system for robotized laser-based direct metal addition system. Addit Manuf 10:24–35. https://doi.org/10.1016/j.addma.2016.01.002 CrossRef

37.

Tang Z, Liu W, Yan Z, Wang H, Zhang HC (2019) Study on evolution behavior of geometrical accuracy based on dynamic characteristics of molten pool in laser-based direct energy deposition. J Mech Eng 55(15). https://doi.org/10.3901/jme.2019.15.039

38.

Gharbi M, Peyre P, Gorny C, Carin M, Morville S, Le Masson P, Carron D, Fabbro R (2013) Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4 V alloy. J Mater Process Technol 213(5):791–800. https://doi.org/10.1016/j.jmatprotec.2012.11.015 CrossRef

39.

Iravani-Tabrizipour M, Toyserkani E (2007) An image-based feature tracking algorithm for real-time measurement of clad height. Mach Vis Appl 18(6):343–354. https://doi.org/10.1007/s00138-006-0066-7 CrossRef

40.

Mozaffari A, Fathi A, Khajepour A, Toyserkani E (2013) Optimal design of laser solid freeform fabrication system and real-time prediction of melt pool geometry using intelligent evolutionary algorithms. Appl Soft Comput 13(3):1505–1519. https://doi.org/10.1016/j.asoc.2012.05.031 CrossRef

41.

Farshidianfar MH, Khajepour A, Zeinali M, Gelrich A (2013) System identification and height control of laser cladding using adaptive neuro-fuzzy inference systems. Int Congr Appl Laser Elect 2013:615–623. https://doi.org/10.2351/1.5062940 CrossRef

42.

Zeinali M, Khajepour A (2010) Height control in laser cladding using adaptive sliding mode technique: theory and experiment. J Manuf Sci Eng 132(4):041016. https://doi.org/10.1115/1.4002023 CrossRef

43.

Fathi A, Khajepour A, Durali M, Toyserkani E (2008) Geometry control of the deposited layer in a nonplanar laser cladding process using a variable structure controller. J Manuf Sci Eng 130(3):031003. https://doi.org/10.1115/1.2823085 CrossRef

44.

Fathi A, Khajepour A, Toyserkani E, Durali M (2007) Clad height control in laser solid freeform fabrication using a feedforward PID controller. Int J Adv Manuf Technol 35(3-4):280–292. https://doi.org/10.1007/s00170-006-0721-1 CrossRef

45.

Toyserkani E, Khajepour A (2006) A mechatronics approach to laser powder deposition process. Mechatronics 16(10):631–641. https://doi.org/10.1016/j.mechatronics.2006.05.002 CrossRef

46.

Asselin M, Toyserkani E, Iravani-Tabrizipour M, Khajepour A (2005) Development of trinocular CCD-based optical detector for real-time monitoring of laser cladding. IEEE ASME Int Conf Adv Intell Mechatron 3:1190–1196. https://doi.org/10.1109/ICMA.2005.1626722 CrossRef

47.

Hsu H-W, Lo Y-L, Lee M-H (2019) Vision-based inspection system for cladding height measurement in direct energy deposition (DED). Addit Manuf 27:372–378. https://doi.org/10.1016/j.addma.2019.03.017 CrossRef

48.

Peyre P, Dal M, Pouzet S, Castelnau O (2017) Simplified numerical model for the laser metal deposition additive manufacturing process. J Laser Appl 29(2). https://doi.org/10.2351/1.4983251

49.

Heralić A, Christiansson A-K, Ottosson M, Lennartson B (2010) Increased stability in laser metal wire deposition through feedback from optical measurements. Opt Laser Eng 48(4):478–485. https://doi.org/10.1016/j.optlaseng.2009.08.012 CrossRef

50.

Herali A, Christiansson AK, Hurtig K, Ottosson M, Lennartson B (2008) Control design for automation of robotized laser metal-wire deposition. IFAC Proceedings Volumes 41:14785–14791. https://doi.org/10.3182/20080706-5-kr-1001.2361 CrossRef

51.

Akbari M, Kovacevic R (2018) An investigation on mechanical and microstructural properties of 316 LSi parts fabricated by a robotized laser/wire direct metal deposition system. Addit Manuf 23:487–497. https://doi.org/10.1016/j.addma.2018.08.031 CrossRef

52.

Zhao Z, Guo Y, Bai L, Wang K, Han J (2019) Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision. Opt Int J Light Electron Opt 181:351–360. https://doi.org/10.1016/j.ijleo.2018.12.071 CrossRef

53.

Xiong J, Zhang G (2013) Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision. Meas Sci Technol 24(11):115103. https://doi.org/10.1088/0957-0233/24/11/115103 CrossRef

54.

Xiong J, Zhang G, Qiu Z, Li Y (2013) Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing. J Cleaner Prod 41:82–88. https://doi.org/10.1016/j.jclepro.2012.10.009 CrossRef

55.

Xiong J, Yin Z, Zhang W (2016) Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing. J Mater Process Technol 233:100–106. https://doi.org/10.1016/j.jmatprotec.2016.02.021 CrossRef

56.

Xiong J, Lei Y, Chen H, Zhang G (2017) Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition. J Mater Process Technol 240:397–403. https://doi.org/10.1016/j.jmatprotec.2016.10.019 CrossRef

57.

Li Y, Xiong J, Yin Z (2019) Molten pool stability of thin-wall parts in robotic GMA-based additive manufacturing with various position depositions. Rob Comput Integr Manuf 56:1–11. https://doi.org/10.1016/j.rcim.2018.08.002 CrossRef

58.

Xiong J, Pi Y, Chen H (2019) Deposition height detection and feature point extraction in robotic GTA-based additive manufacturing using passive vision sensing. Rob Comput Integr Manuf 59:326–334. https://doi.org/10.1016/j.rcim.2019.05.006 CrossRef

59.

Biegler M, Marko A, Graf B, Rethmeier M (2018) Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry. Addit Manuf 24:264–272. https://doi.org/10.1016/j.addma.2018.10.006 CrossRef

60.

Donadello S, Motta M, Demir AG, Previtali B (2018) Coaxial laser triangulation for height monitoring in laser metal deposition. Procedia CIRP 74:144–148. https://doi.org/10.1016/j.procir.2018.08.066 CrossRef

61.

Donadello S, Motta M, Demir AG, Previtali B (2019) Monitoring of laser metal deposition height by means of coaxial laser triangulation. Opt Laser Eng 112:136–144. https://doi.org/10.1016/j.optlaseng.2018.09.012 CrossRef

62.

Biegler M, Graf B, Rethmeier M (2018) Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up. Procedia CIRP 74:158–162. https://doi.org/10.1016/j.procir.2018.08.069 CrossRef

63.

Xie R, Zhao Y, Chen G, Lin X, Zhang S, Fan S, Shi Q (2018) The full-field strain distribution and the evolution behavior during additive manufacturing through in-situ observation. Mater Des 150:49–54. https://doi.org/10.1016/j.matdes.2018.04.039 CrossRef

64.

Xie R, Chen G, Zhao Y, Zhang S, Yan W, Lin X, Shi Q (2019) In-situ observation and numerical simulation on the transient strain and distortion prediction during additive manufacturing. J Manuf Process 38:494–501. https://doi.org/10.1016/j.jmapro.2019.01.049 CrossRef

65.

Radel S, Diourte A, Soulié F, Company O, Bordreuil C (2019) Skeleton arc additive manufacturing with closed loop control. Addit Manuf 26:106–116. https://doi.org/10.1016/j.addma.2019.01.003 CrossRef

66.

Xiong J, Zhang G (2014) Adaptive control of deposited height in GMAW-based layer additive manufacturing. J Mater Process Technol 214(4):962–968. https://doi.org/10.1016/j.jmatprotec.2013.11.014 CrossRef

67.

Xiong J, Liu G, Pi Y (2019) Increasing stability in robotic GTA-based additive manufacturing through optical measurement and feedback control. Rob Comput Integr Manuf 59:385–393. https://doi.org/10.1016/j.rcim.2019.05.012 CrossRef

68.

Lu X, Lin X, Chiumenti M, Cervera M, Hu Y, Ji X, Ma L, Huang W (2019) In situ measurements and thermo-mechanical simulation of Ti–6Al–4 V laser solid forming processes. Int J Mech Sci 153:119–130. https://doi.org/10.1016/j.ijmecsci.2019.01.043 CrossRef

69.

Lei JB, Wang Z, Wang YS (2011) Measurement on temperature distribution of metal powder stream in laser fabricating. Appl Mec Mater 101-102:994–997. https://doi.org/10.4028/www.scientific.net/AMM.101-102.994 CrossRef

70.

Liu S, Farahmand P, Kovacevic R (2014) Optical monitoring of high power direct diode laser cladding. Opt Laser Technol 64:363–376. https://doi.org/10.1016/j.optlastec.2014.06.002 CrossRef

71.

Smurov I, Doubenskaia M, Zaitsev A (2013) Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation. Surf Coat Technol 220:112–121. https://doi.org/10.1016/j.surfcoat.2012.10.053 CrossRef

72.

Smurov I, Doubenskaia M, Grigoriev S, Nazarov A (2012) Optical monitoring in laser cladding of Ti6Al4V. J Therm Spray Technol 21(6):1357–1362. https://doi.org/10.1007/s11666-012-9808-4 CrossRef

73.

Doubenskaia M, Bertrand P, Smurov I (2004) Optical monitoring of Nd:YAG laser cladding. Thin Solid Films 453-454:477–485. https://doi.org/10.1016/j.tsf.2003.11.184 CrossRef

74.

Liu S, Zhang Y, Kovacevic R (2015) Numerical simulation and experimental study of powder flow distribution in high power direct diode laser cladding process. Lasers Manuf Mater Proce 2:199–218. https://doi.org/10.1007/s40516-015-0015-2 CrossRef

75.

Balu P, Leggett P, Kovacevic R (2012) Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process. J Mater Process Technol 212(7):1598–1610. https://doi.org/10.1016/j.jmatprotec.2012.02.020 CrossRef

76.

Wu J, Zhao P, Wei H, Lin Q, Zhang Y (2018) Development of powder distribution model of discontinuous coaxial powder stream in laser direct metal deposition. Powder Technol 340:449–458. https://doi.org/10.1016/j.powtec.2018.09.032 CrossRef

77.

Abe T, Sasahara H (2019) Layer geometry control for the fabrication of lattice structures by wire and arc additive manufacturing. Addit Manuf 28:639–648. https://doi.org/10.1016/j.addma.2019.06.010 CrossRef

78.

Zhan Q, Liang Y, Ding J, Williams S (2016) A wire deflection detection method based on image processing in wire + arc additive manufacturing. Int J Adv Manuf Technol 89(1-4):755–763. https://doi.org/10.1007/s00170-016-9106-2 CrossRef

79.

Griffith ML, Schlienger ME, Harwell LD, Oliver MS, Baldwin MD, Ensz MT, Essien M, Brooks J, Robino CV, Smugeresky JE (1999) Understanding thermal behavior in the LENS process. Mater Des 20(2–3):107–113. https://doi.org/10.1016/S0261-3069(99)00016-3 CrossRef

80.

Barua S, Liou F, Newkirk J, Sparks T (2014) Vision-based defect detection in laser metal deposition process. Rapid Prototyp J 20(1):77–85. https://doi.org/10.1108/RPJ-04-2012-0036 CrossRef

81.

Wang YS, Wang JJ, Lei JB, Yang XC (2008) Study on measurement of melting process of molten pool formed by laser scanning mirror. Key Eng Mater 392:141–145. https://doi.org/10.4028/www.scientific.net/KEM.392-394.141 CrossRef

82.

Wirth F, Arpagaus S, Wegener K (2018) Analysis of melt pool dynamics in laser cladding and direct metal deposition by automated high-speed camera image evaluation. Addit Manuf 21:369–382. https://doi.org/10.1016/j.addma.2018.03.025 CrossRef

83.

Stutzman CB, Nassar AR, Reutzel EW (2018) Multi-sensor investigations of optical emissions and their relations to directed energy deposition processes and quality. Addit Manuf 21:333–339. https://doi.org/10.1016/j.addma.2018.03.017 CrossRef

84.

Nassar AR, Starr B, Reutzel EW (2015) Process monitoring of directed-energy deposition of Inconel-718 via plume imaging. Paper presented at the Solid Freeform Fabrication Symposium (SFF), Austin, TX, Aug.

85.

Wu B, Ding D, Pan Z, Cuiuri D, Li H, Han J, Fei Z (2017) Effects of heat accumulation on the arc characteristics and metal transfer behavior in wire arc additive manufacturing of Ti6Al4V. J Mater Process Technol 250:304–312. https://doi.org/10.1016/j.jmatprotec.2017.07.037 CrossRef

86.

Haley JC, Schoenung JM, Lavernia EJ (2018) Observations of particle-melt pool impact events in directed energy deposition. Addit Manuf 22:368–374. https://doi.org/10.1016/j.addma.2018.04.028 CrossRef

87.

Abe N, Tanigawa D, Tsukamoto M, Hayashi Y, Yamazaki H, Tatsumi Y, Yoneyama M (2013) Dynamic observation of formation process in laser cladding using high speed video camera. Paper presented at the International Congress on Applications of Lasers & Electro-Optics. https://doi.org/10.2351/1.5062915.

88.

Gharbi M, Peyre P, Gorny C, Carin M, Morville S, Le Masson P, Carron D, Fabbro R (2014) Influence of a pulsed laser regime on surface finish induced by the direct metal deposition process on a Ti64 alloy. J Mater Process Technol 214(2):485–495. https://doi.org/10.1016/j.jmatprotec.2013.10.004 CrossRef

89.

Zhang B, Liu S, Shin YC (2019) In-process monitoring of porosity during laser additive manufacturing process. Addit Manuf 28:497–505. https://doi.org/10.1016/j.addma.2019.05.030 CrossRef

90.

Motta M, Demir AG, Previtali B (2018) High-speed imaging and process characterization of coaxial laser metal wire deposition. Addit Manuf 22:497–507. https://doi.org/10.1016/j.addma.2018.05.043 CrossRef

91.

Xu X, Ding J, Ganguly S, Diao C, Williams S (2018) Oxide accumulation effects on wire + arc layer-by-layer additive manufacture process. J Mater Process Technol 252:739–750. https://doi.org/10.1016/j.jmatprotec.2017.10.030 CrossRef

92.

Abe T, Mori D, Sonoya K, Nakamura M, Sasahara H (2019) Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing. Precis Eng 55:231–239. https://doi.org/10.1016/j.precisioneng.2018.09.010 CrossRef

93.

Xiong J, Zhang G, Zhang W (2015) Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing. Int J Adv Manuf Technol 80(9-12):1767–1776 4DD CrossRef

94.

Guo M, Jia C, Zhou J, Liu W, Wu C (2020) Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM. J Mater Process Technol:275. https://doi.org/10.1016/j.jmatprotec.2019.116355

95.

Jimi F, Kehong W, Dongqing Y, Yong H (2019) Gas flow status analysis in CMT+P additive manufacturing based on texture features of molten pool images. Opt Int J Light Electron Opt 179:385–394. https://doi.org/10.1016/j.ijleo.2018.10.179 CrossRef

96.

Liu R, Wang Z, Sparks T, Liou F, Nedic C (2017) Stereo vision-based repair of metallic components. Rapid Prototyp J 23(1):65–73. https://doi.org/10.1108/rpj-09-2015-0118 CrossRef

97.

Wang Z, Liu R, Sparks T, Liu H, Liou F (2015) Stereo vision based hybrid manufacturing process for precision metal parts. Precis Eng 42:1–5. https://doi.org/10.1016/j.precisioneng.2014.11.012 CrossRef

98.

Garmendia I, Pujana J, Lamikiz A, Madarieta M, Leunda J (2019) Structured light-based height control for laser metal deposition. J Manuf Process 42:20–27. https://doi.org/10.1016/j.jmapro.2019.04.018 CrossRef

99.

Garmendia I, Leunda J, Pujana J, Lamikiz A (2018) In-process height control during laser metal deposition based on structured light 3D scanning. Procedia CIRP 68:375–380. https://doi.org/10.1016/j.procir.2017.12.098 CrossRef

100.

Borish M, Post BK, Roschli A, Chesser PC, Love LJ, Gaul KT (2018) Defect identification and mitigation via visual inspection in large-scale additive manufacturing. JOM 71(3):893–899. https://doi.org/10.1007/s11837-018-3220-6 CrossRef

101.

Heralić A, Christiansson A-K, Lennartson B (2012) Height control of laser metal-wire deposition based on iterative learning control and 3D scanning. Opt Laser Eng 50(9):1230–1241. https://doi.org/10.1016/j.optlaseng.2012.03.016 CrossRef

102.

Artaza T, Alberdi A, Murua M, Gorrotxategi J, Frías J, Puertas G, Melchor MA, Mugica D, Suárez A (2017) Design and integration of WAAM technology and in situ monitoring system in a gantry machine. Procedia Manuf 13:778–785. https://doi.org/10.1016/j.promfg.2017.09.184 CrossRef

103.

Doumanidis C, Skordeli E (2000) Distributed-parameter modeling for geometry control of manufacturing processes with material deposition. J Dyn Syst Meas Contr 122(1):71–77 4DD CrossRef

104.

Kwak Y-M, Doumanidis CC (2002) Geometry regulation of material deposition in near-net shape manufacturing by thermally scanned welding. J Manuf Process 4(1):28–41. https://doi.org/10.1016/s1526-6125(02)70131-x CrossRef

105.

Doumanidis C, Kwak Y-M (2001) Geometry modeling and control by infrared and laser sensing in thermal manufacturing with material deposition. J Manuf Sci Eng 123(1):45–52. https://doi.org/10.1115/1.1344898 CrossRef

106.

Xu F, Dhokia V, Colegrove P, McAndrew A, Williams S, Henstridge A, Newman ST (2018) Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts. Int J Computer Integr Manuf 31(8):785–798. https://doi.org/10.1080/0951192x.2018.1466395 CrossRef

107.

Xiong J, Zhang G, Hu J, Wu L (2012) Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis. J Intell Manuf 25(1):157–163. https://doi.org/10.1007/s10845-012-0682-1 CrossRef

108.

Xiong J, Zhang G, Hu J, Li Y (2013) Forecasting process parameters for GMAW-based rapid manufacturing using closed-loop iteration based on neural network. Int J Adv Manuf Technol 69(1-4):743–751. https://doi.org/10.1007/s00170-013-5038-2 CrossRef

109.

Han Q, Li D, Sun H, Zhang G (2019) Forming characteristics of additive manufacturing process by twin electrode gas tungsten arc. Int J Adv Manuf Technol:1–10. https://doi.org/10.1007/s00170-019-04314-9.

110.

Deng Q, Chen D, Fu W, Cao P (2014) Measurement of the molten pool image during laser cladding process. Paper presented at the International Conference on Mechatronics, Electronic, Industrial and Control Engineering. https://doi.org/10.2991/meic-14.2014.141.

111.

Hu D, Kovacevic R (2003) Sensing, modeling and control for laser-based additive manufacturing. Int J Mach Tools Manuf 43:51–60. https://doi.org/10.1016/S0890-6955(02)00163-3 CrossRef

112.

Lison M, Devesse W, de Baere D, Hinderdael M, Guillaume P (2019) Hyperspectral and thermal temperature estimation during laser cladding. J Laser Appl 31(2). https://doi.org/10.2351/1.5096129

113.

Hu D, Mei H, Tao G, Kovacevic R (2001) Closed loop control of 3D laser cladding based on infrared sensing. Paper presented at the Proceedings of the Solid Freeform Fabrication Symposium. https://doi.org/10.26153/tsw/3245.

114.

Liu Y, Wang L, Brandt M (2019) Model predictive control of laser metal deposition. Int J Adv Manuf Technol:1–13. https://doi.org/10.1007/s00170-019-04279-9

115.

Stockton GR, Zalameda JN, Burke ER, Hafley RA, Taminger KM, Domack CS, Brewer A, Martin RE, Colbert FP (2013) Thermal imaging for assessment of electron-beam freeform fabrication (EBF3) additive manufacturing deposits. Paper presented at the Thermosense: Thermal Infrared Applications XXXV. https://doi.org/10.1117/12.2018233

116.

Zalameda JN, Bison P, Taminger KM, Domack CS, Zalameda JN, Taminger BL, Hafley RA, Burke ER (2016) In-process thermal imaging of the electron beam freeform fabrication process. Paper presented at the Thermosense: Thermal Infrared Applications XXXVIII. https://doi.org/10.1117/12.2222439.

117.

Hammell JJ, Ludvigson CJ, Langerman MA, Sears JW (2011) Thermal imaging of laser powder deposition for process diagnostics. Paper presented at the ASME 2011 International Mechanical Engineering Congress and Exposition. https://doi.org/10.1115/IMECE2011-63701.

118.

Liu Z, Li T, Ning F, Cong W, Kim H, Jiang Q, Zhang H (2019) Effects of deposition variables on molten pool temperature during laser engineered net shaping of Inconel 718 superalloy. Int J Adv Manuf Technol 102:969–976. https://doi.org/10.1007/s00170-018-03245-1 CrossRef

119.

Pavlov M, Novichenko D, Doubenskaia M (2011) Optical diagnostics of deposition of metal matrix composites by laser cladding. Phys Procedia 12:674–682. https://doi.org/10.1016/j.phpro.2011.03.084 CrossRef

120.

Doubenskaia M, Smurov I, Grigoriev S, Pavlov M, Tikhonova E (2012) Optical monitoring in elaboration of metal matrix composites by direct metal deposition. Phys Procedia 39:767–775. https://doi.org/10.1016/j.phpro.2012.10.099 CrossRef

121.

Doubenskaia M, Pavlov M, Grigoriev S, Smurov I (2013) Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera. Surf Coat Technol 220:244–247. https://doi.org/10.1016/j.surfcoat.2012.10.044 CrossRef

122.

Farahmand P, Kovacevic R (2015) Laser cladding assisted with an induction heater (LCAIH) of Ni–60%WC coating. J Mater Process Technol 222:244–258. https://doi.org/10.1016/j.jmatprotec.2015.02.026 CrossRef

123.

Yang D, Wang G, Zhang G (2016) A comparative study of GMAW- and DE-GMAW-based additive manufacturing techniques: thermal behavior of the deposition process for thin-walled parts. Int J Adv Manuf Technol 91(5-8):2175–2184. https://doi.org/10.1007/s00170-016-9898-0 CrossRef

124.

Yang D, Wang G, Zhang G (2017) Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography. J Mater Process Technol 244:215–224. https://doi.org/10.1016/j.jmatprotec.2017.01.024 CrossRef

125.

Ding XP, Li HM, Zhu JQ, Wang GY, Cao HZ, Zhang Q, Ma HL (2017) Application of infrared thermography for laser metal-wire additive manufacturing in vacuum. Infrared Phys Technol 81:166–169. https://doi.org/10.1016/j.infrared.2016.12.017 CrossRef

126.

Yan Z, Liu W, Tang Z, Liu X, Zhang N, Wang Z, Zhang H (2019) Effect of thermal characteristics on distortion in laser cladding of AISI 316L. J Manuf Process 44:309–318. https://doi.org/10.1016/j.jmapro.2019.06.011 CrossRef

127.

Farshidianfar MH, Khajepour A, Gerlich AP (2016) Effect of real-time cooling rate on microstructure in laser additive manufacturing. J Mater Process Technol 231:468–478. https://doi.org/10.1016/j.jmatprotec.2016.01.017 CrossRef

128.

Farshidianfar MH, Khajepour A, Gerlich A (2016) Real-time control of microstructure in laser additive manufacturing. Int J Adv Manuf Technol 82(5-8):1173–1186. https://doi.org/10.1007/s00170-015-7423-5 CrossRef

129.

Wolff SJ, Gan Z, Lin S, Bennett JL, Yan W, Hyatt G, Ehmann KF, Wagner GJ, Liu WK, Cao J (2019) Experimentally validated predictions of thermal history and microhardness in laser-deposited Inconel 718 on carbon steel. Addit Manuf 27:540–551. https://doi.org/10.1016/j.addma.2019.03.019 CrossRef

130.

Khanzadeh M, Chowdhury S, Tschopp MA, Doude HR, Marufuzzaman M, Bian L (2018) In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes. IISE Transactions 51(5):437–455. https://doi.org/10.1080/24725854.2017.1417656 CrossRef

131.

Bennett JL, Wolff SJ, Hyatt G, Ehmann K, Cao J (2017) Thermal effect on clad dimension for laser deposited Inconel 718. J Manuf Process 28:550–557. https://doi.org/10.1016/j.jmapro.2017.04.024 CrossRef

132.

Bennett JL, Kafka OL, Liao H, Wolff SJ, Yu C, Cheng P, Cao J (2018) Cooling rate effect on tensile strength of laser deposited Inconel 718. Procedia Manuf 26:912–919. https://doi.org/10.1016/j.promfg.2018.07.118 CrossRef

133.

Froend M, Ventzke V, Kashaev N, Klusemann B, Enz J (2019) Thermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiances. Addit Manuf:29. https://doi.org/10.1016/j.addma.2019.100800

134.

Bai X, Zhang H, Wang G (2013) Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging. Int J Adv Manuf Technol 69(5-8):1087–1095. https://doi.org/10.1007/s00170-013-5102-y. CrossRef

135.

Bi G, Gasser A, Wissenbach K, Drenker A, Poprawe R (2006) Investigation on the direct laser metallic powder deposition process via temperature measurement. Appl Surf Sci 253(3):1411–1416. https://doi.org/10.1016/j.apsusc.2006.02.025 CrossRef

136.

Bi G, Sun CN, Gasser A (2013) Study on influential factors for process monitoring and control in laser aided additive manufacturing. J Mater Process Technol 213(3):463–468. https://doi.org/10.1016/j.jmatprotec.2012.10.006 CrossRef

137.

Bi G, Gasser A, Wissenbach K, Drenker A, Poprawe R (2006) Characterization of the process control for the direct laser metallic powder deposition. Surf Coat Technol 201(6):2676–2683. https://doi.org/10.1016/j.surfcoat.2006.05.006 CrossRef

138.

De Baere D, Devesse W, De Pauw B, Smeesters L, Thienpont H, Guillaume P (2016) Spectroscopic monitoring and melt pool temperature estimation during the laser metal deposition process. J Laser Appl 28(2):022303. https://doi.org/10.2351/1.4943995 CrossRef

139.

Song L, Huang W, Han X, Mazumder J (2017) Real-time composition monitoring using support vector regression of laser-induced plasma for laser additive manufacturing. IEEE Trans Ind Electron 64(1):633–642. https://doi.org/10.1109/tie.2016.2608318 CrossRef

140.

Song L, Wang C, Mazumder J (2012) Identification of phase transformation using optical emission spectroscopy for direct metal deposition process. High Power Laser Mater Processing Laser Beam Delivery Diagnostics Applications 8239:82390G. https://doi.org/10.1117/12.908264 CrossRef

141.

Song L, Mazumder J (2012) Real time Cr measurement using optical emission spectroscopy during direct metal deposition process. IEEE Sens J 12(5):958–964. https://doi.org/10.1109/JSEN.2011.2162316 CrossRef

142.

Lednev VN, Tretyakov RS, Sdvizhenskii PA, Grishin MY, Asyutin RD, Pershin SM (2018) Laser induced breakdown spectroscopy for in-situ multielemental analysis during additive manufacturing process. J Phys: Conf Ser:1109. https://doi.org/10.1088/1742-6596/1109/1/012050

143.

Bartkowiak K (2010) Direct laser deposition process within spectrographic analysis in situ. Phys Procedia 5:623–629. https://doi.org/10.1016/j.phpro.2010.08.090 CrossRef

144.

Ya W, Konuk AR, Aarts R, Pathiraj B, Huis in’t Veld B (2015) Spectroscopic monitoring of metallic bonding in laser metal deposition. J Mater Process Technol 220:276–284. https://doi.org/10.1016/j.jmatprotec.2015.01.026. CrossRef

145.

Lednev VN, Sdvizhenskii PA, Asyutin RD, Tretyakov RS, Grishin MY, Stavertiy AY, Pershin SM (2019) In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing. Addit Manuf 25:64–70. https://doi.org/10.1016/j.addma.2018.10.043 CrossRef

146.

Shin J, Mazumder J (2018) Composition monitoring using plasma diagnostics during direct metal deposition (DMD) process. Opt Laser Technol 106:40–46. https://doi.org/10.1016/j.optlastec.2018.03.020 CrossRef

147.

Kisielewicz A, Sikström F, Christiansson AK, Ancona A (2018) Spectroscopic monitoring of laser blown powder directed energy deposition of Alloy 718. Procedia Manuf 25:418–425. https://doi.org/10.1016/j.promfg.2018.06.112 CrossRef

148.

Di Lazzaro P, Pershin SM, Fedorov AN, Stavertiy AY, Asyutin RD, Grishin MY, Sdvizhenskii PA, Tretyakov RS, Lednev V (2019) Laser induced breakdown spectroscopy for in situ multielemental analysis during additive manufacturing process. Paper presented at the XXII International Symposium on High Power Laser Systems and Applications. https://doi.org/10.1117/12.2522074.

149.

Liu S, Liu W, Harooni M, Ma J, Kovacevic R (2014) Real-time monitoring of laser hot-wire cladding of Inconel 625. Opt Laser Technol 62:124–134. https://doi.org/10.1016/j.optlastec.2014.03.007 CrossRef

150.

Devesse W, De Baere D, Hinderdael M, Guillaume P (2017) Model-based temperature feedback control of laser cladding using high resolution hyperspectral imaging. IEEE/ASME Trans Mechatron 22:2714–2722 4DD CrossRef

151.

Devesse W, De Baere D, Guillaume P (2017) High resolution temperature measurement of liquid stainless steel using hyperspectral imaging. Sensors 17(1):91. https://doi.org/10.3390/s17010091 CrossRef

152.

Devesse W, De Baere D, Hinderdael M, Guillaume P (2016) Hardware-in-the-loop control of additive manufacturing processes using temperature feedback. J Laser Appl 28(2):022302. https://doi.org/10.2351/1.4943911 CrossRef

153.

Devesse W, De Baere D, Hinderdael M, Guillaume P (2016) High resolution temperature estimation during laser cladding of stainless steel. Phys Procedia 83:1253–1260. https://doi.org/10.1016/j.phpro.2016.08.132 CrossRef

154.

Song L, Mazumder J (2011) Feedback control of melt pool temperature during laser cladding process. IEEE Trans Control Syst Technol 19(6):1349–1356. https://doi.org/10.1109/TCST.2010.2093901 CrossRef

155.

Tan H, Chen J, Zhang F, Lin X, Huang W (2010) Estimation of laser solid forming process based on temperature measurement. Opt Laser Technol 42(1):47–54. https://doi.org/10.1016/j.optlastec.2009.04.016 CrossRef

156.

Hua T, Jing C, Xin L, Fengying Z, Weidong H (2008) Research on molten pool temperature in the process of laser rapid forming. J Mater Process Technol 198(1-3):454–462. https://doi.org/10.1016/j.jmatprotec.2007.06.090 CrossRef

157.

Sun S, Durandet Y, Brandt M (2007) Melt pool temperature and its effect on clad formation in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6. J Laser Appl 19(1):32–40. https://doi.org/10.2351/1.2402524 CrossRef

158.

Salehi D, Brandt M (2005) Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process. Int J Adv Manuf Technol 29(3-4):273–278. https://doi.org/10.1007/s00170-005-2514-3 CrossRef

159.

Muvvala G, Patra Karmakar D, Nath AK (2017) Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer. J Alloys Compd 714:514–521. https://doi.org/10.1016/j.jallcom.2017.04.254 CrossRef

160.

Gopinath M, Patra Karmakar D, Nath AK (2017) Monitoring of molten pool thermal history and its significance in laser cladding process. Paper presented at the ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, Los Angeles, CA https://doi.org/10.1115/msec2017-2657.

161.

Tang L, Landers RG (2010) Melt pool temperature control for laser metal deposition processes—part II: layer-to-layer temperature control. J Manuf Sci Eng 132(1):011011. https://doi.org/10.1115/1.4000883 CrossRef

162.

Tang L, Landers RG (2010) Melt pool temperature control for laser metal deposition processes—part I: online temperature control. J Manuf Sci Eng 132(1):011010. https://doi.org/10.1115/1.4000882 CrossRef

163.

Tang L, Ruan J, Sparks TE, Landers RG, Liou F (2009) Layer-to-layer height control for laser metal deposition processes. Paper presented at the Conference on American Control Conference. IEEE Press. https://doi.org/10.1115/1.4003691.

164.

Wu B, Pan Z, Ding D, Cuiuri D, Li H (2018) Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing. Addit Manuf 23:151–160. https://doi.org/10.1016/j.addma.2018.08.004 CrossRef

165.

Wang F, Mao H, Zhang D, Zhao X, Yu S (2008) Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis. Appl Surf Sci 255(5):3267–3275. https://doi.org/10.1016/j.apsusc.2008.09.039 CrossRef

166.

Gaja H, Liou F (2016) Defects monitoring of laser metal deposition using acoustic emission sensor. Int J Adv Manuf Technol 90(1-4):561–574. https://doi.org/10.1007/s00170-016-9366-x CrossRef

167.

Whiting J, Springer A, Sciammarella F (2018) Real-time acoustic emission monitoring of powder mass flow rate for directed energy deposition. Addit Manuf 23:312–318. https://doi.org/10.1016/j.addma.2018.08.015 CrossRef

168.

Koester LW, Taheri H, Bigelow TA, Bond LJ, Faierson EJ (2018) In-situ acoustic signature monitoring in additive manufacturing processes. Paper presented at the AIP Conference Proceedings. https://doi.org/10.1063/1.5031503.

169.

Taheri H, Koester LW, Bigelow TA, Faierson EJ, Bond LJ (2019) In situ additive manufacturing process monitoring with an acoustic technique: clustering performance evaluation using K-means algorithm. J Manuf Sci Eng 141(4):041011. https://doi.org/10.1115/1.4042786 CrossRef

170.

Bond LJ, Koester LW, Taheri H, Niezrecki C, Meyendorf NG, Gath K (2019) NDE in-process for metal parts fabricated using powder based additive manufacturing. Paper presented at the Smart Structures and NDE for Energy Systems and Industry 4.0. https://doi.org/10.1117/12.2520611.

171.

Wolff SJ, Wu H, Parab N, Zhao C, Ehmann KF, Sun T, Cao J (2019) In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing. Sci Rep 9(1):962. https://doi.org/10.1038/s41598-018-36678-5 CrossRef

172.

Aucott L, Dong H, Mirihanage W, Atwood R, Kidess A, Gao S, Wen S, Marsden J, Feng S, Tong M, Connolley T, Drakopoulos M, Kleijn CR, Richardson IM, Browne DJ, Mathiesen RH, Atkinson HV (2018) Revealing internal flow behaviour in arc welding and additive manufacturing of metals. Nat Commun 9(1):5414. https://doi.org/10.1038/s41467-018-07900-9 CrossRef

173.

Hu YP, Chen CW, Mukherjee K (2000) Measurement of temperature distributions during laser cladding process. J Laser Appl 12(3):126–130. https://doi.org/10.2351/1.521921 CrossRef

174.

Segerstark A, Andersson J, Svensson L-E (2016) Evaluation of a temperature measurement method developed for laser metal deposition. Sci Technol Weld Joining 22(1):1–6. https://doi.org/10.1080/13621718.2016.1169363 CrossRef

175.

Ya W, Pathiraj B, Liu S (2016) 2D modelling of clad geometry and resulting thermal cycles during laser cladding. J Mater Process Technol 230:217–232. https://doi.org/10.1016/j.jmatprotec.2015.11.012 CrossRef

176.

Kumara C, Segerstark A, Hanning F, Dixit N, Joshi S, Moverare J, Nylén P (2019) Microstructure modelling of laser metal powder directed energy deposition of alloy 718. Addit Manuf 25:357–364. https://doi.org/10.1016/j.addma.2018.11.024 CrossRef

177.

Zhang J, Li W, Yan L, Liou F (2018) A two-dimensional simulation of grain structure growth within the substrate and the fusion zone during direct metal deposition. CR Mec 346(11):1072–1086. https://doi.org/10.1016/j.crme.2018.08.003 CrossRef

178.

Zhang Z, Kovacevic R (2019) A thermo-mechanical model for simulating the temperature and stress distribution during laser cladding process. Int J Adv Manuf Technol 102(1-4):457–472. https://doi.org/10.1007/s00170-018-3127-y CrossRef

179.

Heigel JC, Michaleris P, Palmer TA (2015) In situ monitoring and characterization of distortion during laser cladding of Inconel®; 625. J Mater Process Technol 220:135–145. https://doi.org/10.1016/j.jmatprotec.2014.12.029 CrossRef

180.

Xiong J, Lei Y, Li R (2017) Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures. Appl Therm Eng 126:43–52. https://doi.org/10.1016/j.applthermaleng.2017.07.168 CrossRef

181.

Lei Y, Xiong J, Li R (2018) Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing. Int J Adv Manuf Technol 96:1355–1365. https://doi.org/10.1007/s00170-018-1699-1 CrossRef

182.

Xiong J, Li R, Lei Y, Chen H (2018) Heat propagation of circular thin-walled parts fabricated in additive manufacturing using gas metal arc welding. J Mater Process Technol 251:12–19. https://doi.org/10.1016/j.jmatprotec.2017.08.007 CrossRef

183.

Li R, Xiong J, Lei Y (2019) Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts. J Manuf Process 40:59–67. https://doi.org/10.1016/j.jmapro.2019.03.006 CrossRef

184.

Denlinger ER, Heigel JC, Michaleris P, Palmer TA (2015) Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. J Mater Process Technol 215:123–131. https://doi.org/10.1016/j.jmatprotec.2014.07.030 CrossRef

185.

Hagqvist P, Heralić A, Christiansson A-K, Lennartson B (2014) Resistance measurements for control of laser metal wire deposition. Opt Laser Eng 54:62–67. https://doi.org/10.1016/j.optlaseng.2013.10.010 CrossRef

186.

Hagqvist P, Heralić A, Christiansson A-K, Lennartson B (2015) Resistance based iterative learning control of additive manufacturing with wire. Mechatronics 31:116–123. https://doi.org/10.1016/j.mechatronics.2015.03.008 CrossRef

187.

Grasso M, Gallina F, Colosimo BM (2018) Data fusion methods for statistical process monitoring and quality characterization in metal additive manufacturing. Procedia CIRP 75:103–107. https://doi.org/10.1016/j.procir.2018.04.045 CrossRef

188.

Thombansen U, Ungers M (2014) Illumination for process observation in laser material processing. Phys Procedia 56:1286–1296. https://doi.org/10.1016/j.phpro.2014.08.053 CrossRef

189.

Barua S, Sparks T, Liou F (2011) Development of low-cost imaging system for laser metal deposition processes. Rapid Prototyp J 17(3):203–210. https://doi.org/10.1108/13552541111124789 CrossRef

190.

Buhr M, Weber J, Wenzl JP, Möller M, Emmelmann C (2018) Influences of process conditions on stability of sensor controlled robot-based laser metal deposition. Procedia CIRP 74(149-153). https://doi.org/10.1016/j.procir.2018.08.067

191.

Boyer TH (2003) Thermodynamics of the harmonic oscillator: Wien’s displacement law and the Planck spectrum. Am J Phys 71(9):866. https://doi.org/10.1119/1.1566782 CrossRef

192.

Shevchik SA, Kenel C, Leinenbach C, Wasmer K (2018) Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks. Addit Manuf 21:598–604. https://doi.org/10.1016/j.addma.2017.11.012 CrossRef

193.

Ye D, Hong GS, Zhang Y, Zhu K, Fuh JYH (2018) Defect detection in selective laser melting technology by acoustic signals with deep belief networks. Int J Adv Manuf Technol 96(5-8):2791–2801. https://doi.org/10.1007/s00170-018-1728-0 CrossRef

194.

Dryburgh P, Patel R, Pieris DM, Hirsch M, Li W, Sharples SD, Smith RJ, Clare AT, Clark M (2019) Spatially resolved acoustic spectroscopy for texture imaging in powder bed fusion nickel superalloys. Paper presented at the AIP Conference Proceedings. https://doi.org/10.1063/1.5099708.

195.

Wu H, Wang Y, Yu Z (2016) In situ monitoring of FDM machine condition via acoustic emission. Int J Adv Manuf Technol 84(5):1483–1495. https://doi.org/10.1007/s00170-015-7809-4 CrossRef

196.

Lu QY, Wong CH (2017) Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring. Virtual Phys Prototyp 13(2):39–48. https://doi.org/10.1080/17452759.2017.1351201 CrossRef

197.

Guo Q, Zhao C, Escano LI, Young Z, Xiong L, Fezzaa K, Everhart W, Brown B, Sun T, Chen L (2018) Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy X-ray imaging. Acta Mater 151:169–180. https://doi.org/10.1016/j.actamat.2018.03.036 CrossRef

198.

Guo Q, Zhao C, Qu M, Xiong L, Escano LI, Hojjatzadeh SMH, Parab ND, Fezzaa K, Everhart W, Sun T, Chen L (2019) In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process. Addit Manuf 28:600–609. https://doi.org/10.1016/j.addma.2019.04.021 CrossRef

199.

Richter B, Blanke N, Werner C, Parab ND, Sun T, Vollertsen F, Pfefferkorn FE (2019) High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy. CIRP Ann. https://doi.org/10.1016/j.cirp.2019.04.110

200.

Bobel A, Hector LG, Chelladurai I, Sachdev AK, Brown T, Poling WA, Kubic R, Gould B, Zhao C, Parab N, Greco A, Sun T (2019) In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion. Materialia. https://doi.org/10.1016/j.mtla.2019.100306

201.

Martin AA, Calta NP, Hammons JA, Khairallah SA, Nielsen MH, Shuttlesworth RM, Sinclair N, Matthews MJ, Jeffries JR, Willey TM, Lee JRI (2019) Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging. Mater Today Advan:1. https://doi.org/10.1016/j.mtadv.2019.01.001

202.

Leung CLA, Marussi S, Atwood RC, Towrie M, Withers PJ, Lee PD (2018) In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing. Nat Commun 9(1):1355. https://doi.org/10.1038/s41467-018-03734-7 CrossRef

203.

Zhao C, Fezzaa K, Cunningham RW, Wen H, De Carlo F, Chen L, Rollett AD, Sun T (2017) Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Sci Rep 7(1):3602. https://doi.org/10.1038/s41598-017-03761-2 CrossRef

204.

Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, Rollett AD (2019) Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging. Science 363(6429):849–852. https://doi.org/10.1126/science.aav4687 CrossRef

205.

Parab ND, Zhao C, Cunningham R, Escano LI, Fezzaa K, Everhart W, Rollett AD, Chen L, Sun T (2018) Ultrafast X-ray imaging of laser-metal additive manufacturing processes. J Synchrotron Radiat 25(Pt 5):1467–1477. https://doi.org/10.1107/S1600577518009554 CrossRef

206.

Martin AA, Calta NP, Khairallah SA, Wang J, Depond PJ, Fong AY, Thampy V, Guss GM, Kiss AM, Stone KH, Tassone CJ, Nelson Weker J, Toney MF, van Buuren T, Matthews MJ (2019) Dynamics of pore formation during laser powder bed fusion additive manufacturing. Nat Commun 10(1):1987. https://doi.org/10.1038/s41467-019-10009-2 CrossRef

207.

Fathi A, Durall M, Toyserkani E, Khajepour A (2006) Control of the clad height in laser powder deposition process using a PID controller. Paper presented at the ASME 2006 International Mechanical Engineering Congress and Exposition. https://doi.org/10.1115/IMECE2006-13949.

208.

Farshidianfar MH, Khajepour A, Khosravani S, Gelrich A (2013) Clad height control in laser cladding using a nonlinear optimal output tracking controller. Int Congr Appl Laser Elect 2013:470–479. https://doi.org/10.2351/1.5062918 CrossRef

209.

Mazumder J, Dutta D, Kikuchi N, Ghosh A (2000) Closed loop direct metal deposition: art to part. Opt Laser Eng 34(4-6):397–414. https://doi.org/10.1016/S0143-8166(00)00072-5 CrossRef

210.

Muvvala G, Patra Karmakar D, Nath AK (2018) In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating. J Alloys Compd 740:545–558. https://doi.org/10.1016/j.jallcom.2017.12.364 CrossRef

211.

Muvvala G, Patra Karmakar D, Nath AK (2017) Online assessment of TiC decomposition in laser cladding of metal matrix composite coating. Mater Des 121:310–320. https://doi.org/10.1016/j.matdes.2017.02.061 CrossRef

212.

Muvvala G, Patra Karmakar D, Nath AK (2017) Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy. Opt Laser Eng 88:139–152. https://doi.org/10.1016/j.optlaseng.2016.08.005 CrossRef

213.

Karnati S, Matta N, Sparks T (2013) Vision-based process monitoring for laser metal deposition processes. Paper presented at the Proceedings Solid Freeform Fabrication symposium.

214.

Muller M, Fabbro R, El-Rabii H, Hirano K (2012) Temperature measurement of laser heated metals in highly oxidizing environment using 2D single-band and spectral pyrometry. J Laser Appl 24(2). https://doi.org/10.2351/1.3701400

215.

Zhu L, Luo Y, Han J, Zhang C, Xu J, Chen D (2019) Energy characteristics of droplet transfer in wire-arc additive manufacturing based on the analysis of arc signals. Measurement 134:804–813. https://doi.org/10.1016/j.measurement.2018.10.048 CrossRef

216.

Huang Y, Ansari M, Asgari H, Farshidianfar MH, Sarker D, Khamesee MB, Toyserkani E (2019) Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing). J Mater Process Technol 274. https://doi.org/10.1016/j.jmatprotec.2019.116286

217.

DePond PJ, Guss G, Ly S, Calta NP, Deane D, Khairallah S, Matthews MJ (2018) In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry. Mater Des 154:347–359. https://doi.org/10.1016/j.matdes.2018.05.050 CrossRef

218.

Arnold C, Pobel C, Osmanlic F, Körner C (2018) Layerwise monitoring of electron beam melting via backscatter electron detection. Rapid Prototyp J 24:1401–1406. https://doi.org/10.1108/RPJ-02-2018-0034 CrossRef

219.

You D, Gao X, Katayama S (2015) WPD-PCA-based laser welding process monitoring and defects diagnosis by using FNN and SVM. IEEE Trans Ind Electron 62(1):628–636. https://doi.org/10.1109/tie.2014.2319216 CrossRef

Titel: A review on in situ monitoring technology for directed energy deposition of metals
verfasst von: Zi-jue Tang
Wei-wei Liu
Yi-wen Wang
Kaze Mojtaba Saleheen
Zhi-chao Liu
Shi-tong Peng
Zhao Zhang
Hong-chao Zhang
Publikationsdatum: 19.06.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 11-12/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05569-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2020

Detecting machine chatter using audio data and machine learning

Modeling of instantaneous cutting force for large pitch screw with vibration consideration of the machine tool

Influence of a cutter’s main geometrical parameters on cutting forces in plunge milling of Ti6Al4V

Development of a hybrid DLT cloud architecture for the automated use of finite element simulation as a service for fine blanking

Influence of surface quality on residual stress of API 5L X80 steel submitted to static load and its prediction by artificial neural networks

On processing strategy to minimize defects while drilling borosilicate glass with microwave energy

Premium Partner

Marktübersichten