Characterization of juvenile wood to mature wood transition age in black spruce (Picea mariana (Mill.) B.S.P.) at different stand densities and sampling heights

The radial pattern of both maximum ring density and ring area of 36 black spruce trees were used to determine the transition age from juvenile wood to mature wood. The data were obtained by X-ray densitometry and both segmented linear and polynomial regressions were used to point out the age of the juvenile wood boundary. Three stand densities (1,790, 2,700 and 3,400 stems/ha) and three sampling heights (2.4, 5.1 and 7.8 m) were studied. Although maximum ring density and ring area presented similar radial patterns, they gave two significantly different results of transition ages. The maximum ring density over-estimated the transition age (17.6 years) in contrast to ring area (14 years). The results show that the transition from juvenile wood to mature wood occurred after 12 years at 7.8 m (versus 13.1 years at a height of 5.1 m, and 17.6 years at 2.4 m). Although transition age occurred later in the high stand density group (21 years), the difference was not significant between the three stand density groups. Nevertheless, transition age remains difficult to determine since no standard definition exists. The transition occurs over years, and most probably a transition wood exists between juvenile wood and mature wood. Estimation of the juvenile wood proportion in volume shows that it remains constant along the stem and it increases with stand density.