Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Polymer Bulletin
Erschienen in: Polymer Bulletin 6/2017

07.10.2016 | Original Paper

The effect of the inorganic nanomaterials on the UV-absorption, rheological and mechanical properties of the rapid prototyping epoxy-based composites

verfasst von: Lu Wang, Xiuyuan Ni

Erschienen in: Polymer Bulletin | Ausgabe 6/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

We here report the photosensitive nanocomposites as the new rapid prototyping materials. The nanocomposites are prepared using the properly surface-modified sepiolite nanofibers, graphene oxide, TiO2 and SiO2 nanoparticles as the reinforcing fillers in the epoxy-based resin. These nanocomposites are investigated about the mechanical properties, viscosity and light absorption. By fitting the rheological test results into the Krieger-Dougherty equation, the influences of the different-shaped fillers on the material viscosity and the maximum packing fraction of the fillers are obtained. The extinction coefficients of the inorganic fillers are obtained using UV–Vis spectroscopy. The mechanical properties of the nanocomposites are improved due to the surface-modified inorganic fillers. It is found that the as-prepared materials are appropriate for stereolithography and digital light processing, with which we succeed in fabricating the dental model of high dimensional accuracy.
Vorheriger Artikel pH-controlled drug release of radiation synthesized graphene oxide/(acrylic acid-co-sodium alginate) interpenetrating network
Nächster Artikel Fabrication of asymmetric and symmetric membranes based on PES/PEG/DMAc

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Giannatsis J, Deoussis V (2009) Additive fabrication technologies applied to medicine and health care: a review. Int J Adv Manuf Technol 40:116–127CrossRef
2.
Wendel B, Rietzel D, Schmachtenberg E et al (2008) Additive processing of polymers. Macromol Mater Eng 293:799–809CrossRef
3.
Corcione CE, Striani R, Cannoletta D et al (2015) Organically modified montmorillonite polymer nanocomposites for stereolithography building process. Polym Adv Technol 26:92–98CrossRef
4.
Salmoria GV, Ahrens CH, Fredel M et al (2005) Stereolithography somos 7110 resin: mechanical behavior and fractography of parts post-cured by different methods. Polym Test 24:157–162CrossRef
5.
Chiu SH, Pong SH, Lin CH et al (2008) A study of photomask correction method in area-forming rapid prototyping system. Rapid prototyping J 14:285–292CrossRef
6.
Burdick JA, Peterson AJ, Anseth KS (2001) Conversion and temperature profiles during the photoinitiated polymerization of thick orthopaedic biomaterials. Biomaterials 22:1779–1786CrossRef
7.
Sandoval H, Wicker RB (2006) Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties. Rapid Prototyp J 12:292–303CrossRef
8.
Kumar S, Hofmann M, Weder C et al (2012) Reinforcement of stereolithographic resins for rapid prototyping with cellulose nanocrystals. ACS Appl Mater Interfaces 4:5399–5407CrossRef
9.
Gurr M, Hofmann D, Mülhaupt R et al (2008) Acrylic nanocomposite resins for use in stereolithography and structural light modulation based rapid prototyping and Rapid manufacturing technologies. Adv Funct Mater 18:2390–2397CrossRef
10.
Duan Y, Zhou Y, Li D et al (2011) Nano-TiO2-modified photosensitive resin for RP. Rapid prototyping J 17:247–252CrossRef
11.
Ivanova OS, Williams CB, Campbell TA (2013) Additive manufacturing (AM) and nanotechnology: promises and challenges. Rapid Prototyp J 19:353–364CrossRef
12.
Azari A, Nikzad S (2009) The evolution of rapid prototyping in dentistry: a review. Rapid Prototyp J 15:216–225CrossRef
13.
Martin-Gallego M, Bernal MM, Lopez-Manchado MA et al (2013) Comparison of filler percolation and mechanical properties in graphene and carbon nanotubes filled epoxy nanocomposites. Eur Polym J 49:1347–1353CrossRef
14.
Kasgoz A, Akin D, Durmus A et al (2014) Effect of different types of carbon fillers on mechanical and rheological properties of cyclic olefin copolymer (COC) composites. Compos B 66:126–135CrossRef
15.
Krieger IM, Dougherty TJ (1959) A mechanism for nonnewtonian flow in suspensions of rigid spheres. Trans Soc Rheol 3:137–152CrossRef
16.
Marini J, Branciforti MC, Lotti C (2010) Effect of matrix viscosity on the extent of exfoliation in EVA/organoclay nanocomposites. Polym Adv Technol 21:408–417
17.
Sun L, Boo WJ, Bicerano J et al (2009) Effect of nanoplatelets on the rheological behavior of epoxy monomers. Macromol Mater Eng 294:103–113CrossRef
18.
Kaffashi B, Kaveh A, Jazani OM, Saeb MR (2012) Improving rheological properties of covalently MWCNT/epoxy nanocomposites via surface re-modification. Polym Bull 68:2187–2197CrossRef
19.
Uematsu H, Aoki Y, Koyama K et al (2010) Rheology of SiO2/(acrylic polymer/epoxy) suspensions. I. Linear viscoelasticity. Rheol Acta 49:299–304CrossRef
20.
Romo-Uribe A, Arcos-Casarrubias JA, Flores A, Valerio-Cárdenas and González AE (2014) Influence of rubber on the curing kinetics of DGEBA epoxy and the effect on the morphology and hardness of the composites. Polym Bull 71:1241–1262
21.
Chartier T, Hinczewski C, Corbel S (1999) UV curable systems for tape casting. J Eur Ceram Soc 19:67–74CrossRef
22.
Liu H, Mo J (2010) Study on Nanosilica Reinforced stereolithography resin. J Reinf Plast Compos 29:909–920CrossRef
23.
Wang Y, Wang W, Zhang Z et al (2016) Study of the glass transition temperature and the mechanical properties of PET/modified silica nanocomposite by molecular dynamics simulation. Eur Polym J 75:36–45CrossRef
24.
Li P, Zheng Y, Li M et al (2016) Enhanced toughness and glass transition temperature of epoxy nanocomposites filled with solvent-free liquid-like nanocrystal-functionalized graphene oxide. Mater Des 89:653–659CrossRef
25.
Pedrazzoli D, Tuba F, Karger-Kocsis J et al (2014) Mechanical and rheological response of polypropylene/boehmite nanocomposites. J Reinf Plast Compos 33:252–265CrossRef
26.
Yao XF, Yeh HY, Zhou D, Zhang YH (2006) The structural characterization and properties of SiO2–epoxy nanocomposites. J Compos Mater 40:371–381CrossRef
27.
Boon MS, Mariatti M (2014) Silane treatment of magnetite filler and its effect on the properties of magnetite-filled epoxy thin-film composites. Polym Bull 71:3333–3346CrossRef
Metadaten
Titel
The effect of the inorganic nanomaterials on the UV-absorption, rheological and mechanical properties of the rapid prototyping epoxy-based composites
verfasst von
Lu Wang
Xiuyuan Ni
Publikationsdatum
07.10.2016
Verlag
Springer Berlin Heidelberg
Erschienen in
Polymer Bulletin / Ausgabe 6/2017
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI
https://doi.org/10.1007/s00289-016-1825-x

Weitere Artikel der Ausgabe 6/2017

Polymer Bulletin 6/2017 Zur Ausgabe

Original Paper

Preparation, characterization and the release kinetics of mentha-8-thiol-3-one-β-cyclodextrin inclusion complex

Original Paper

UV-induced switchable wettability between superhydrophobic and superhydrophilic polypropylene surfaces with an improvement of adhesion properties

Original Paper

Fabrication of asymmetric and symmetric membranes based on PES/PEG/DMAc

Original Paper

Hollow glass microspheres/piassava fiber-reinforced homo- and co-polypropylene composites: preparation and properties

Original Paper

Study on physicochemical properties of poly(ester-urethane) derived from biodegradable poly(ε-caprolactone) and poly(butylene succinate) as soft segments

Original Paper

Using biodiesel as a green solvent in the polymerization reactions: the attempt to separate the biodiesel from the polymer by thermal treatment

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise