Abstract
In this work, the yield stress of ferrofluid-based magnetorheological fluids (F-MRF) was investigated. The fluids are composed of a ferrofluid as the liquid carrier and micro-sized iron particles as magnetic particles. The physical and magnetorheological properties of the F-MRF have been investigated and compared with a commercial mineral oil-based MR fluid. With the addition of a ferrofluid, the anti-sedimentation property of the commercial MR fluids could be significantly improved. The static yield stress of the F-MRF samples with four different weight fractions (ϕ) of micro-sized iron particles were measured using three different testing modes under various magnetic fields. The effects of weight fraction, magnetic strength, and test mode on the yielding stress have been systematically studied. Finally, a scaling relation, \(\tau _{\rm ys} = {\rm a}B^{\rm b}\), was proposed for the yield stress modeling of the F-MRF system.
Similar content being viewed by others
References
Barnes HA (1999) The yield stress, a review or, everything flows. J Non-Newton Fluid Mech 81:133–178
Bonnecaze RT, Brady JF (1992) Yield stresses in electrorheological fluids. J Rheol 36:73–115
Chen G, Yeo SH (2002) Research on magnetorheological fluid and its applications, school of mechanical and production engineering. Nanyang Technological University, Singapore
Chen ZY, Tang X, Zhang GC et al (1997) A novel approach of preparing ultrafine magnetic metallic particles and the magnetorheology measurement for fluids containing these particles. In: Proceedings of the 6th international conference on electro-rheological fluids, magneto-rheological fluids and their applications, 22–25 July. World Scientific, Yonezawa, Japan pp 486–93
Clercx HJH, Bossis G (1995) Static yield stresses and shear moduli in electrorheological fluids. J Chem Phys 103(21):9426–9437
Ginder JM, Davis LC (1994) Shear stresses in magnetorheological fluids: role of magnetic saturation. Appl Phys Lett 65(26):3410–3412
Ginder JM, Larry D, Elie Y, Lloyd CD (1996) Magnetic fluid-based magnetorheological fluids. Eastman Kodak Co., Rochester, US patent number 5549843
Ginder JM, Nichols ME, Elie LD, Tardiff JL (1999) Magnetorheological elastomers: properties and applications. Smart Mater Struct 3–4:131–138
Gopal A (2000) Controlled-stress versus controlled-rate rheometers. Am Lab 32:2
Hao T, Kawai A, Ikazaki F (2000) The yield stress equation for the electrorheological fluids. Langmuir 16:3058–3066
John S, Yoo JH, Wereley N et al (2002) Magneto-rheological fluids exploiting nanometer sized particles. Smart Mater Struct 4699:473–484
Kormann C, Laun HM, Richter HJ (1996) MR fluids with nano-sized magnetic particles. In: Proceedings of the 5th international conference on electro-rheological fluids, magneto-rheological fluids and associated technology, 10–14 July. World Scientific, Sheffield, UK pp. 362–7
Li WH, Chen G, Yeo SH (1999) Viscoelastic properties of MR fluids. Smart Mater Struc 8:460–468
Lopez MT, Kuzhir P, Lacis S, Bossis G et al (2006) Magnetorheology for suspensions of solid particles dispersed in ferrofluids. J Phys: Condens Matter 18:S2803–S2813
Odenbach S (2003) Ferrofluids-Magnetically controlled fluids. Colloids Surf A Physicochem and Eng Asp 217:171–178
Phule PP, Ginder JM (1997) Synthesis and properties of novel magnetorheological fluids having improved stability and redispersibility. In: Proceedings of the 6th international conference on electro-rheological fluids, magneto-rheological fluids and their applications, 22–25 July. World Scientific, Yonezawa, Japan pp. 445–53
Qiu G, Wang Q, Nie M (2006) Polypyrrole-Fe3O4 magnetic nanocomposite prepared by ultrasonic irradiation. Macromol Mater Eng 291:68–74
Rabinow J (1948) Magnetic fluid clutch. Tech News Bull-U.S., Natl Bur Stand 32:54–60
Rankin PJ, Horvath AT, Klingenberg DJ (1999) Magnetorheology in viscoplastic media. Rheol Acta 38:471–477
Roberts GP, Barnes HA (2001) New measurements of the flow curves for carbopol dispersions without slip artifacts. Rheol Acta 40:499–503
Rosenfeld N, Wereley NM, Radakrishnan R, Sudarshan TS (2002) Behavior of magnetorheological fluids utilizing nanopowder iron. Inter J Modern Phys B 16:2392–2398, Eighth International Conference Electrorheological Fluids and Magnetorheological Fluids
Russel WB, Grant MC (2000) Distinguishing between dynamic yielding and wall slip in a weakly flocculated colloidal dispersion. Colloids Surf A 161:271–282
Shimada K, Akagami Y, Fujita T, Miyazaki T, Kamiyama S, Shibayama A (2002) Characteristics of MCF (Magnetic Compound Fluid) in a rotating rheometer. J Magn Magn Mat 252:235–237
Shinada K, Shuchi S, Shiabayama A, Kamiyama A, Kamiyama S, Satoh A (2004) Effect of a magnetic cluster on the magnetic pressure of a magnetic compound fluid. Fluid Dyn Res 34:21–32
Walls HJ, Brett CS, Angelica MS, Saad AK (2003) Yield stress and wall slip phenomena in colloidal silica gels. J Rheol 47:847–868
Wang X, Gordaninejad F (2006) Study of magnetorheological fluids at high shear rates. Rheol Acta 45:899–908
Wilson MJ, Fuchs A, Gordaninejad F (2002) Development and characterization of magnetorheological polymer gels. J Appl Polym Sci 84:2733–2742
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, Y., Li, L. & Chen, G. Static yield stress of ferrofluid-based magnetorheological fluids. Rheol Acta 48, 457–466 (2009). https://doi.org/10.1007/s00397-009-0346-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00397-009-0346-z