Skip to main content
Erschienen in: Microsystem Technologies 2/2019

07.07.2018 | Technical Paper

Design and simulation of a novel RF MEMS shunt capacitive switch with a unique spring for Ka-band application

verfasst von: Hamid Reza Ansari, Saeed Khosroabadi

Erschienen in: Microsystem Technologies | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

RF-MEMS switches may be divided into capacitive and metal-to-metal types in terms of type of connection. In capacitive switches in the OFF-state the beam does not attach to the transmission line due to the presence of a thin dielectric layer and it gets released easily. Capacitive switches are better compared with the metal-to-metal types due to their ability to transmit signals of higher frequency and power. In this paper, a novel RF MEMS shunt capacitive switch with a unique spring design is proposed. The proposed design benefits from high isolation, low loss, low actuation voltage, small size and weight compared to similar switches and is designed for application in the Ka-band. Step structure is used in the mechanical design of the switch to reduce the air gap between the bridge and the transmission line that has resulted in reduction of actuation voltage to 2.2 V. The proposed switch has been placed upon a coplanar waveguide (CPW) line with an impedance of 50 Ohms. \({\text{SiO}}_{2}\) with a thickness of 1000 Å has been used as dielectric to increase isolation and down-state capacitance. The unique design of the spring results in the reduction of stress to a minimum at all points of the switch especially the springs at the time of applying the actuation voltage. This advantage would reduce switch failures as time passes and results in increased life of the switch. Up-state capacitance is 93.3 fF and down-state capacitance is 2.64 pF. Therefore, a capacitive ratio of 28 is obtained. The dynamic behavior of the switch is studied by using the COMSOL Multiphysics software package and the RF characteristics have been obtained by using the HFSS software and show good RF performance. The results show that in the up-state, the designed switch including S11 is less than − 11.5 dB and S21 is more than − 0.85 dB at 1–40 GHz. In the down-state, the switch has excellent isolation in the Ka-band. Maximum isolation is − 71 dB that occurs at the resonance frequency of 30.5 GHz.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Lee J, Yang WS, Kang S, Choi CA (2004) Design and parameterextraction based small-singal modeling of a novel centeranchor MEMS series switch. In proceedings of the 34th European Microwave Conference. Amsterdam, The Netherlands, pp 1433–1436 Lee J, Yang WS, Kang S, Choi CA (2004) Design and parameterextraction based small-singal modeling of a novel centeranchor MEMS series switch. In proceedings of the 34th European Microwave Conference. Amsterdam, The Netherlands, pp 1433–1436
Zurück zum Zitat Rebeiz GM (2003) RF MEMS: theory, design and technology. Wiley, New JerseyCrossRef Rebeiz GM (2003) RF MEMS: theory, design and technology. Wiley, New JerseyCrossRef
Metadaten
Titel
Design and simulation of a novel RF MEMS shunt capacitive switch with a unique spring for Ka-band application
verfasst von
Hamid Reza Ansari
Saeed Khosroabadi
Publikationsdatum
07.07.2018
Verlag
Springer Berlin Heidelberg
Erschienen in
Microsystem Technologies / Ausgabe 2/2019
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI
https://doi.org/10.1007/s00542-018-3989-9

Weitere Artikel der Ausgabe 2/2019

Microsystem Technologies 2/2019 Zur Ausgabe

Neuer Inhalt