Skip to main content
Erschienen in: Forschung im Ingenieurwesen 3-4/2014

01.12.2014 | Originalarbeiten/Originals

Numerical analysis of the twin-roll casting of thin aluminium-steel clad strips

verfasst von: M. Stolbchenko, O. Grydin, A. Samsonenko, V. Khvist, M. Schaper

Erschienen in: Forschung im Ingenieurwesen | Ausgabe 3-4/2014

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The production of thin aluminium-steel clad strips by means of twin-roll casting is one of the prospective trends in the development of sheet production. The main advantages of twin-roll casting are low specific energy and resource consumption. Besides this, the resulting compound has a high bonding strength owing to the presence of a continuous thin layer of intermetallic phases having an approximate thickness of 3 µm at the interface of the two metals. At the same time, the quality of the clad strip depends on the microstructure and properties of the aluminium layer formed directly from a melt. A deformation immediately following the solidification of the metal between the two rotated, internally water-cooled rolls has a substantial influence on this aluminium layer. Due to the complexity of observing the processes occurring in the melt pool, a numerical simulation became one of the main methods for their investigation. Simulation is widely used to describe the process of twin-roll casting of monomaterial strips, but so far it has not been used for to comprehensively analyse the process of twin-roll casting of clad strips. In the present paper, a two-dimentional finite-element simulation of the system “clad strip—water-cooled rolls” using the ANSYS software is proposed. A joint analysis is carried out of the heat transfer, viscous flow of aluminium melt, its solidification and deformation resulting in the temperature distribution in the cast metal as well as in the tool. The dependences of the deformation strain and outlet temperature of the clad strip on the main technological process parameters; obtained by numerical simulation, are shown.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Stahl-Alu-Hybrid-platine ist serienreif (2011) Blech Rohre Profile 1–2:8 Stahl-Alu-Hybrid-platine ist serienreif (2011) Blech Rohre Profile 1–2:8
2.
Zurück zum Zitat Haga T, Nakamura R, Kumai S, Watari H (2009) Clad strip casting by a twin roll caster. Mater Sci Eng 37:117–124 Haga T, Nakamura R, Kumai S, Watari H (2009) Clad strip casting by a twin roll caster. Mater Sci Eng 37:117–124
3.
Zurück zum Zitat Bae JH, Rao AKP, Kim KH, Kim NJ (2011) Cladding of Mg alloy with Al by twin-roll casting. Scripta Materialia 64:836–839CrossRef Bae JH, Rao AKP, Kim KH, Kim NJ (2011) Cladding of Mg alloy with Al by twin-roll casting. Scripta Materialia 64:836–839CrossRef
4.
Zurück zum Zitat Grydin O, Gerstein G, Nürnberger F, Schaper M, Danchenko V (2013) Twin-roll casting of aluminium–steel clad strips. J Manuf Process 15:501–507CrossRef Grydin O, Gerstein G, Nürnberger F, Schaper M, Danchenko V (2013) Twin-roll casting of aluminium–steel clad strips. J Manuf Process 15:501–507CrossRef
5.
Zurück zum Zitat Kawase BH, Makimoto M, Takagi K, Ishida Y, Tanaka T (1983) Development of aluminium-clad steel sheet by roll-bonding. Transactions ISIJ 23:628–632CrossRef Kawase BH, Makimoto M, Takagi K, Ishida Y, Tanaka T (1983) Development of aluminium-clad steel sheet by roll-bonding. Transactions ISIJ 23:628–632CrossRef
6.
Zurück zum Zitat Schloegl CM, Planitzer C, Harrer O, Buchmayr B (2011) Herstellung und Umformbarkeit walzplattierter Magnesium (AZ31)—Aluminium (1050)—Verbunde. BHM 156(7):249–254. doi:10.1007/s00501-011-0003-6 Schloegl CM, Planitzer C, Harrer O, Buchmayr B (2011) Herstellung und Umformbarkeit walzplattierter Magnesium (AZ31)—Aluminium (1050)—Verbunde. BHM 156(7):249–254. doi:10.1007/s00501-011-0003-6
7.
Zurück zum Zitat Grydin O, Schaper M, Danchenko V (2011) Twin-roll casting of high-strength age-hardened aluminium alloys. Metall Min Ind 3(7):7–16 Grydin O, Schaper M, Danchenko V (2011) Twin-roll casting of high-strength age-hardened aluminium alloys. Metall Min Ind 3(7):7–16
8.
Zurück zum Zitat Zhou SX, Zhong J, Mao D, Funke P (2003) Experimental study on material properties of hot rolled and continuously cast aluminium strips in cold rolling. JOMPT 134:363–373 Zhou SX, Zhong J, Mao D, Funke P (2003) Experimental study on material properties of hot rolled and continuously cast aluminium strips in cold rolling. JOMPT 134:363–373
9.
Zurück zum Zitat Manesh HD, Taheri AK (2003) Bond strength and formability of an aluminum-clad steel sheet. J Alloy Compd 361:138–143CrossRef Manesh HD, Taheri AK (2003) Bond strength and formability of an aluminum-clad steel sheet. J Alloy Compd 361:138–143CrossRef
10.
Zurück zum Zitat Mukae S, Nishio K, Kato M, Inoue T, Sumitomo K (1995) Effect of heat treatment on bond characteristics of aluminium clad steel: Production and characteristics of vacuum roll bonded clad materials. Weld Int 9(5):384–389CrossRef Mukae S, Nishio K, Kato M, Inoue T, Sumitomo K (1995) Effect of heat treatment on bond characteristics of aluminium clad steel: Production and characteristics of vacuum roll bonded clad materials. Weld Int 9(5):384–389CrossRef
11.
Zurück zum Zitat Ferry M (2006) Direct strip casting of metals and alloys. Woodhead Publishing Limited, CambridgeCrossRef Ferry M (2006) Direct strip casting of metals and alloys. Woodhead Publishing Limited, CambridgeCrossRef
12.
Zurück zum Zitat Yun M et al (1991) An experimental investigation of the effect of strip thickness, metallostatic head and tip setback on the productivity of a twin-roll caster. Cast Metals IV(2):108–111 Yun M et al (1991) An experimental investigation of the effect of strip thickness, metallostatic head and tip setback on the productivity of a twin-roll caster. Cast Metals IV(2):108–111
13.
Zurück zum Zitat Yun M, Lokyer S, Hunt JD (2000) Twin roll casting of aluminium alloys. Mater Sci Eng A 280:116–123CrossRef Yun M, Lokyer S, Hunt JD (2000) Twin roll casting of aluminium alloys. Mater Sci Eng A 280:116–123CrossRef
14.
Zurück zum Zitat Westengen H, Nes E (1984) Twin-roll casting of aluminium, The occurrence of structure, Inhomogeneities and defects in As-Cast strips. Light Metals. TMS Proceedings: 1111–1127 Westengen H, Nes E (1984) Twin-roll casting of aluminium, The occurrence of structure, Inhomogeneities and defects in As-Cast strips. Light Metals. TMS Proceedings: 1111–1127
15.
Zurück zum Zitat Cruchaga MA, Celentano DJ, Lewis RW (2003) Modelling of twin-roll strip casting processes. Commun Numer Meth Engng 19:623–635CrossRefMATH Cruchaga MA, Celentano DJ, Lewis RW (2003) Modelling of twin-roll strip casting processes. Commun Numer Meth Engng 19:623–635CrossRefMATH
16.
Zurück zum Zitat Bae JW, Kang CG, Kang SB (2007) Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena. JOMPT 191:251–255 Bae JW, Kang CG, Kang SB (2007) Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena. JOMPT 191:251–255
17.
Zurück zum Zitat Cao GM, Li ZY, Liu ZY, Wu D, Wang GD, Liu XH (2008) Numerical simulation of molten pool and control strategy of kiss point in a twin-roll strip casting process. Acta metallurgica sinica 21(6):459–468CrossRef Cao GM, Li ZY, Liu ZY, Wu D, Wang GD, Liu XH (2008) Numerical simulation of molten pool and control strategy of kiss point in a twin-roll strip casting process. Acta metallurgica sinica 21(6):459–468CrossRef
18.
Zurück zum Zitat Gjerkeš H, Hartman S, Vertnik R, Šarler B (2007) Temperature field at the twin-roll casting of aluminium alloys: computational model and measurements. WIT Trans Modelling Simul 46:35–44CrossRef Gjerkeš H, Hartman S, Vertnik R, Šarler B (2007) Temperature field at the twin-roll casting of aluminium alloys: computational model and measurements. WIT Trans Modelling Simul 46:35–44CrossRef
19.
Zurück zum Zitat Zhao H, Li P, He L (2011) Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip. JMPT 211:1197–1202 Zhao H, Li P, He L (2011) Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip. JMPT 211:1197–1202
20.
Zurück zum Zitat Miehe A, Gross U (2012) Modelling of heat transfer and solidification processes in horizontal TRC of magnesium alloy AZ31. IOP Conf. Series: Mater Sci Eng 33:12–17. doi:10.1088/1757-899X/33/1/012017 Miehe A, Gross U (2012) Modelling of heat transfer and solidification processes in horizontal TRC of magnesium alloy AZ31. IOP Conf. Series: Mater Sci Eng 33:12–17. doi:10.1088/1757-899X/33/1/012017
21.
Zurück zum Zitat Saxena A, Sahai Y (2002) Modeling of fluid flow and heat transfer in twin roll casting of aluminium alloys. Mater Trans 43(2):206–213CrossRef Saxena A, Sahai Y (2002) Modeling of fluid flow and heat transfer in twin roll casting of aluminium alloys. Mater Trans 43(2):206–213CrossRef
22.
Zurück zum Zitat Sarioglu K, Thevoz P (2003) Simulation of solidification process used in twin roll casting. Light metals. TMS Warrendale Proceedings: 747–752 Sarioglu K, Thevoz P (2003) Simulation of solidification process used in twin roll casting. Light metals. TMS Warrendale Proceedings: 747–752
23.
Zurück zum Zitat Hazadzadeh A, Wells M, Essadiqi E (2012) Mathematical modeling of the twin roll casting process for AZ31 magnesium alloy—effect on the strip thickness. Mg2012: 9th International Conference on Magnesium Alloys and their Applications: 177–182 Hazadzadeh A, Wells M, Essadiqi E (2012) Mathematical modeling of the twin roll casting process for AZ31 magnesium alloy—effect on the strip thickness. Mg2012: 9th International Conference on Magnesium Alloys and their Applications: 177–182
24.
Zurück zum Zitat Ju DY, Hu XD, Zhao HY (2009) Inelastic behavior and numerical analysis in twin-roll casting process of AZ31 alloy. Arch Mech Warszawa 61(3–4):229–239 Ju DY, Hu XD, Zhao HY (2009) Inelastic behavior and numerical analysis in twin-roll casting process of AZ31 alloy. Arch Mech Warszawa 61(3–4):229–239
25.
Zurück zum Zitat Hu XD, Ju DY, Zhao HY (2012) Thermal flow simulation of twin-roll casting magnesium alloy. J Shanghai Jiaotong Univ (Sci) 17(4):479–483. doi:10.1007/s12204-012-1309-6CrossRef Hu XD, Ju DY, Zhao HY (2012) Thermal flow simulation of twin-roll casting magnesium alloy. J Shanghai Jiaotong Univ (Sci) 17(4):479–483. doi:10.1007/s12204-012-1309-6CrossRef
26.
Zurück zum Zitat Liu L et al (2014) 3D numerical simulation on thermal flow coupling field of stainless steel during twin-roll casting. JMEPEG 23:39–48. doi:10.1007/s11665-013-0749-yCrossRef Liu L et al (2014) 3D numerical simulation on thermal flow coupling field of stainless steel during twin-roll casting. JMEPEG 23:39–48. doi:10.1007/s11665-013-0749-yCrossRef
27.
Zurück zum Zitat Fang Y et al (2009) Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting. Int J Min Metall Mater 16(3):304–308CrossRef Fang Y et al (2009) Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting. Int J Min Metall Mater 16(3):304–308CrossRef
28.
Zurück zum Zitat Sahoo S, Kumar A, Dhindaw BK, Ghosh S (2013) Modeling and experimental validation of rapid cooling and solidification during high-speed twin-roll strip casting of Al-33 wt pct Cu. Metall Mater Trans B 4(43):915–924 Sahoo S, Kumar A, Dhindaw BK, Ghosh S (2013) Modeling and experimental validation of rapid cooling and solidification during high-speed twin-roll strip casting of Al-33 wt pct Cu. Metall Mater Trans B 4(43):915–924
29.
Zurück zum Zitat Stolbchenko M (2013) The influence of initial temperature and rolling speed on the deformation parameters at the twin-roll casting of high-strength aluminium-alloyed strips. Materials working by pressure 3(36):173–179 Stolbchenko M (2013) The influence of initial temperature and rolling speed on the deformation parameters at the twin-roll casting of high-strength aluminium-alloyed strips. Materials working by pressure 3(36):173–179
30.
Zurück zum Zitat Grydin O, Ogins’kyy Y, Danchenko V, Bach FW (2010) Experimental twin-roll casting equipment for production of thin strips. Metall Min Ind 2(5):348–354 Grydin O, Ogins’kyy Y, Danchenko V, Bach FW (2010) Experimental twin-roll casting equipment for production of thin strips. Metall Min Ind 2(5):348–354
31.
Zurück zum Zitat Bondarenko S, Grydin O, Stolbchenko M, Schaper M (2013) Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminium alloys. Metal Cast Ukraine 5:3–8 Bondarenko S, Grydin O, Stolbchenko M, Schaper M (2013) Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminium alloys. Metal Cast Ukraine 5:3–8
32.
Zurück zum Zitat Guthrie RIL, Isac M, Kim JS, Tavares RP (2000) Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfacesof twin roll casters and of aluminum to plasma-coated metal substrates. Metall Mater Trans B. Process Metallurgy and Materials Processing Science 31(5):1031–1047CrossRef Guthrie RIL, Isac M, Kim JS, Tavares RP (2000) Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfacesof twin roll casters and of aluminum to plasma-coated metal substrates. Metall Mater Trans B. Process Metallurgy and Materials Processing Science 31(5):1031–1047CrossRef
33.
Zurück zum Zitat Khvist V, Stolbchenko M, Grydin A, Samsonenko A, Golovko Ð (2013) Influence of temperature-rate modes of twin roll casting on the formation of bimetallic aluminium-steel bands in the twin-roll crystallizer. Materials working by pressure 3(36):180–184 Khvist V, Stolbchenko M, Grydin A, Samsonenko A, Golovko Ð (2013) Influence of temperature-rate modes of twin roll casting on the formation of bimetallic aluminium-steel bands in the twin-roll crystallizer. Materials working by pressure 3(36):180–184
34.
Zurück zum Zitat Zeng J, Koitzsch R, Pfeifer H, Friedrich B (2009) Numerical simulation of the twin-roll casting process of magnesium alloy strip. JOMPT 209:2321–2328 Zeng J, Koitzsch R, Pfeifer H, Friedrich B (2009) Numerical simulation of the twin-roll casting process of magnesium alloy strip. JOMPT 209:2321–2328
Metadaten
Titel
Numerical analysis of the twin-roll casting of thin aluminium-steel clad strips
verfasst von
M. Stolbchenko
O. Grydin
A. Samsonenko
V. Khvist
M. Schaper
Publikationsdatum
01.12.2014
Verlag
Springer Berlin Heidelberg
Erschienen in
Forschung im Ingenieurwesen / Ausgabe 3-4/2014
Print ISSN: 0015-7899
Elektronische ISSN: 1434-0860
DOI
https://doi.org/10.1007/s10010-014-0182-x

Weitere Artikel der Ausgabe 3-4/2014

Forschung im Ingenieurwesen 3-4/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.