nach oben

Bulletin of Engineering Geology and the Environment

Erschienen in:

28.03.2019 | Original Paper

Damage evolution behavior and constitutive model of sandstone subjected to chemical corrosion

verfasst von: Yun Lin, Keping Zhou, Feng Gao, Jielin Li

Erschienen in: Bulletin of Engineering Geology and the Environment | Ausgabe 8/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Chemical corrosion has significant impact on the properties of rock materials. To investigate the effect of chemical corrosion on the porosity and mechanical properties of sandstones, the nuclear magnetic resonance (NMR) technique was used for the measurement of porosity. Uniaxial compression tests were then conducted for rock specimens treated with chemical corrosions. The test results showed that, compared with the rock specimens in their natural state, after chemical corrosions, the porosity increased, the uniaxial compressive strength and elastic modulus of sandstone both decreased, but the corresponding peak strain increased. A chemical damage variable derived from the change of porosity and the effective bearing area of rock samples was proposed. Based on the chemical damage variable, the corrosion order of different chemical solutions on sandstone was obtained as H₂SO₄ > NaOH > distilled water. The mechanism of chemical corrosion was also explored based on water-rock reactions. Finally, by introducing the compaction coefficient, an improved statistical damage constitutive model was established to describe the damage evolution of the sandstones treated with different chemical corrosions.

Vorheriger Artikel Comparative analysis of rockmass characterization techniques for the stability prediction of road cut slopes along NH-44A, Mizoram, India

Nächster Artikel Prediction of mechanical and physical properties of some sedimentary rocks from ultrasonic velocities

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bieniawski Z, Bernede M (1979) Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: part 1. Suggested method for determination of the uniaxial compressive strength of rock materials. Int J Rock Mech Min Geomech Abstr 16(2):138–140CrossRef

Chaki S, Takarli M, Agbodjan WP (2008) Influence of thermal damage on physical properties of a granite rock: porosity, permeability and ultrasonic wave evolutions. Constr Bulid Mater 22:1456–1461. https://doi.org/10.1016/j.conbuildmat.2007.04.002 CrossRef

Chen S, Qiao C, Ye Q, Khan MU (2018) Comparative study on three-dimensional statistical damage constitutive modified model of rock based on power function and Weibull distribution. Environ Earth Sci 77:108. https://doi.org/10.1007/s12665-018-7297-6 CrossRef

Darabi MK, Abu Al-Rub RK, Little DN (2012) A continuum damage mechanics framework for modeling micro-damage healing. Int J Solids Struct 49:492–513. https://doi.org/10.1016/j.ijsolstr.2011.10.017 CrossRef

Deng J, Gu D (2011) On a statistical damage constitutive model for rock materials. Comput Geosci 37:122–128. https://doi.org/10.1016/j.cageo.2010.05.018 CrossRef

Fang X, Xu J, Wang P (2018) Compressive failure characteristics of yellow sandstone subjected to the coupling effects of chemical corrosion and repeated freezing and thawing. Eng Geol 233:160–171. https://doi.org/10.1016/j.enggeo.2017.12.014 CrossRef

Feng X, Chen S, Zhou H (2004) Real-time computerized tomography (CT) experiments on sandstone damage evolution during triaxial compression with chemical corrosion. Int. J. Rock Mech. Min. 41:181–192. https://doi.org/10.1016/s1365-1609(03)00059-5 CrossRef

Gao F, Wang Q, Deng H, Zhang J, Tian W, Ke B (2016) Coupled effects of chemical environments and freeze–thaw cycles on damage characteristics of red sandstone. B. Eng. Geol. Environ. 76:1481–1490. https://doi.org/10.1007/s10064-016-0908-0 CrossRef

Han T, Shi J, Cao X (2016) Fracturing and damage to sandstone under coupling effects of chemical corrosion and freeze–thaw cycles. Rock Mech Rock Eng 49:4245–4255. https://doi.org/10.1007/s00603-016-1028-7 CrossRef

Han T, Shi J, Chen Y, Li Z, Li C (2017) Laboratory investigation on the mechanical properties of sandstone immersed in different chemical corrosion under freeze-thaw cycles. Acta Mech. Solida Sin.:503–520

Hu D, Zhou H, Hu Q, Shao J, Feng X, Xiao H (2012) A hydro-mechanical-chemical coupling model for geomaterial with both mechanical and chemical damages considered. Acta Mech Solida Sin 25:361–376. https://doi.org/10.1016/s0894-9166(12)60033-0 CrossRef

Jiang L, Wen Y (2011) Damage constitutive model of sandstone during corrosion by AMD. J Cent South Univ 42:3502–3506 (in Chinese)

Lemaitre J (1985) A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 107:83–89. https://doi.org/10.1115/1.3225775 CrossRef

Li G, Tang C-A (2015) A statistical meso-damage mechanical method for modeling trans-scale progressive failure process of rock. Int. J. Rock Mech. Min. 74:133–150. https://doi.org/10.1016/j.ijrmms.2014.12.006 CrossRef

Li H, Xiong G, Zhao G (2016a) An elasto-plastic constitutive model for soft rock considering mobilization of strength. T Nonferr Metal Soc 26:822–834. https://doi.org/10.1016/s1003-6326(16)64173-0 CrossRef

Li H, Yang D, Zhong Z, Sheng Y, Liu X (2018) Experimental investigation on the micro damage evolution of chemical corroded limestone subjected to cyclic loads. Int J Fatigue 113:23–32. https://doi.org/10.1016/j.ijfatigue.2018.03.022 CrossRef

Li J, Zhou K, Liu W, Deng H (2016b) NMR research on deterioration characteristics of microscopic structure of sandstones in freeze–thaw cycles. T. Nonferr. Metal. Soc. 26:2997–3003. https://doi.org/10.1016/s1003-6326(16)64430-8 CrossRef

Li N, Zhu Y, Su B, S. G (2003) A chemical damage model of sandstone in acid solution. Int J Rock Mech Min 40:243–249. https://doi.org/10.1016/s1365-1609(02)00132-6 CrossRef

Li X, Cao W, Su Y (2012) A statistical damage constitutive model for softening behavior of rocks. Eng Geol 143-144:1–17. https://doi.org/10.1016/j.enggeo.2012.05.005 CrossRef

Liu C, Deng H, Wang Y, Lin Y, Zhao H (2017) Time-varying characteristics of granite microstructures after cyclic dynamic disturbance using nuclear magnetic resonance. Crystals 7:306–317. https://doi.org/10.3390/cryst7100306 CrossRef

Liu X, Ning J, Tan Y, Gu Q (2016) Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading. Int. J. Rock Mech. Min. 85:27–32. https://doi.org/10.1016/j.ijrmms.2016.03.003 CrossRef

Liu X, Tan Y, Ning J, Lu Y, Gu Q (2018) Mechanical properties and damage constitutive model of coal in coal-rock combined body. Int. J. Rock Mech. Min. 110:140–150. https://doi.org/10.1016/j.ijrmms.2018.07.020 CrossRef

Lu G, Yan E, Wang X, Xie L, Gao L (2014) Study of impact of fractal dimension of pore distribution on compressive strength of porous material. Rock Soil Mech 35:2261–2269 (in Chinese)

Lu Y, Wang L, Sun X, Wang J (2016) Experimental study of the influence of water and temperature on the mechanical behavior of mudstone and sandstone. B Eng Geol Environ 76:645–660. https://doi.org/10.1007/s10064-016-0851-0 CrossRef

Miao S, Wang H, Cai M, Song Y, Ma J (2018) Damage constitutive model and variables of cracked rock in a hydro-chemical environment. Arab J Geosci 11:1–19. https://doi.org/10.1007/s12517-017-3373-6 CrossRef

Ni J, Chen Y, Wang P, Wang S, Peng B, Azzam R (2016) Effect of chemical erosion and freeze–thaw cycling on the physical and mechanical characteristics of granites. B. Eng. Geol. Environ. 76:169–179. https://doi.org/10.1007/s10064-016-0891-5 CrossRef

Pearce JK, Kirste DM, Dawson GKW, Farquhar SM, Biddle D, Golding SD, Rudolph V (2015) SO₂ impurity impacts on experimental and simulated CO₂ –water–reservoir rock reactions at carbon storage conditions. Chem Geol 399:65–86. https://doi.org/10.1016/j.chemgeo.2014.10.028 CrossRef

Peng R, Yang Y, Ju Y, Mao L, Yang Y (2011) Computation of fractal dimension of rock pores based on gray CT images. Chin Sci Bull 56:3346–3357. https://doi.org/10.1007/s11434-011-4683-9 CrossRef

Pourhosseini O, Shabanimashcool M (2014) Development of an elasto-plastic constitutive model for intact rocks. Int. J. Rock Mech. Min. 66:1–12. https://doi.org/10.1016/j.ijrmms.2013.11.010 CrossRef

Qiao L, Wang Z, Huang A (2016) Alteration of mesoscopic properties and mechanical behavior of sandstone due to hydro-physical and hydro-chemical effects. Rock Mech Rock Eng 50:255–267. https://doi.org/10.1007/s00603-016-1111-0 CrossRef

Qu D, Li D, Li X, Luo Y, Xu K (2018) Damage evolution mechanism and constitutive model of freeze- thaw yellow sandstone in acidic environment. Cold Reg Sci Technol 155:174–183. https://doi.org/10.1016/j.coldregions.2018.07.012 CrossRef

Tang L, Zhang P, Wang S (2002) Testing study on macroscopic mechanics effect of chemical action of water on rocks. Chinese J Rock Mech Eng 21:526–531

Teng J, Tang J, Zhang Y, Li X (2018) CT experimental study on the damage characteristics of anchored layered rocks. KSCE J Civ Eng:1–10. https://doi.org/10.1007/s12205-018-0425-8 CrossRef

Wang Y, Li X, Zhang B, Wu Y (2014) Meso-damage cracking characteristics analysis for rock and soil aggregate with CT test. Sci China Technol Sc 57:1361–1371. https://doi.org/10.1007/s11431-014-5578-1 CrossRef

Wang Z, Li Y, Wang JG (2007) A damage-softening statistical constitutive model considering rock residual strength. Comput Geosci 33:1–9. https://doi.org/10.1016/j.cageo.2006.02.011 CrossRef

Weibull W (1951) A statistical distribution function of wide applicability. J Appl Mech 18:293–297

Xiao J, Ding D, Jiang F, Xu G (2010) Fatigue damage variable and evolution of rock subjected to cyclic loading. Int J Rock Mech Min 47:461–468. https://doi.org/10.1016/j.ijrmms.2009.11.003 CrossRef

Xu X, Gao F, Zhang Z (2017) Thermo-mechanical coupling damage constitutive model of rock based on the Hoek–Brown strength criterion. Int J Damage Mech:105678951772683. https://doi.org/10.1177/1056789517726838 CrossRef

Xu XL, Karakus M (2018) A coupled thermo-mechanical damage model for granite. Int. J. Rock Mech. Min. 103:195–204. https://doi.org/10.1016/j.ijrmms.2018.01.030 CrossRef

Yang X, Weng L, Hu Z (2017) Damage evolution of rocks under triaxial compressions: an NMR investigation. KSCE J Civ Eng 22(8):2856–2863. https://doi.org/10.1007/s12205-017-0766-8 CrossRef

Yuan W, Liu X, Fu Y (2017) Chemical thermodynamics and chemical kinetics analysis of sandstone dissolution under the action of dry–wet cycles in acid and alkaline environments. B. Eng. Geol. Environ. https://doi.org/10.1007/s10064-017-1162-9 CrossRef

Zhao H, Zhang C, Cao W, Zhao M (2016) Statistical meso-damage model for quasi-brittle rocks to account for damage tolerance principle. Environ Earth Sci 75. https://doi.org/10.1007/s12665-016-5681-7

Zhou K, Li B, Li J, Deng H, Bin F (2015) Microscopic damage and dynamic mechanical properties of rock under freeze–thaw environment. T. Nonferr. Metal. Soc. 25:1254–1261. https://doi.org/10.1016/s1003-6326(15)63723-2 CrossRef

Zhou K, Liu T, Hu Z (2018) Exploration of damage evolution in marble due to lateral unloading using nuclear magnetic resonance. Eng Geol 244:75–85CrossRef

Zhou Z, Cai X, Cao W, Li X, Xiong C (2016) Influence of water content on mechanical properties of rock in both saturation and drying processes. Rock Mech Rock Eng 49:3009–3025. https://doi.org/10.1007/s00603-016-0987-z CrossRef

Titel: Damage evolution behavior and constitutive model of sandstone subjected to chemical corrosion
verfasst von: Yun Lin
Keping Zhou
Feng Gao
Jielin Li
Publikationsdatum: 28.03.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Bulletin of Engineering Geology and the Environment / Ausgabe 8/2019
Print ISSN: 1435-9529
Elektronische ISSN: 1435-9537
DOI: https://doi.org/10.1007/s10064-019-01500-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 8/2019

Quantitative evaluation of rock brittleness based on crack initiation stress and complete stress–strain curves

Field investigation and numerical simulation of the seismic triggering mechanism of the Tahman landslide in eastern Pamir, Northwest China

Shear velocity-based uncertainty quantification for rock joint shear strength

Surface runoff on loess: an example of a commonly overlooked hazardous process from northeast Czech Republic

Predicting debris-flow clusters under extreme rainstorms: a case study on Hong Kong Island

Simulation of drainage hole arrays and seepage control analysis of the Qingyuan Pumped Storage Power Station in China: a case study