Abstract
In Japan, ammoniacal copper quaternary wood preservatives type-1 (ACQ-1), which contains copper and benzalkonium chloride as its active ingredients, is among the most widely used wood preservatives in the pressure treatment of wood. Benzalkonium chloride (BAC) in commercial ACQ-1 products mainly comprises C12 and C14 homologues. In the present study, the leaching characteristics of these BAC homologues were investigated using the heartwood and sapwood portions of Japanese cedar, Japanese larch, and Sakhalin fir treated with ACQ-1 and 1% monoethanolamine (MEA) solution containing equimolar amounts of homologues. Distilled water (DW) and artificial seawater (SW) were used as leaching media. Consequently, it was observed that the leaching rate of the C12 homologue tended to be higher than that of the C14 homologue in DW. The leaching of C12 homologues was accelerated by using SW, resulting in a significantly higher leaching rate than the C14 homologue using SW. It was thought that the difference in the hydrophobicities based on alkyl chain lengths resulted in these phenomena. However, when the heartwood portion of Japanese larch was treated with the homologues in MEA, the leaching rate of the C14 homologue was significantly higher than that of the C12 homologue.
Article PDF
Similar content being viewed by others
References
Read D (2003) Report on copper, chromium and arsenic (CCA) treated timber. New Zealand Environmental Risk Management Authority Report. http://www.ermanz.govt.nz/resources/publications/pdfs/cca-report.pdf. Accessed July 1 2007
Ishida H, Ito T, Yamai M, Matsusaka H, Tsunoda K (2004) Why did Japan replace CCA by alternatives? International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/ WP 04-50215
Japan Standards Association (2004) Japan Industrial Standard (JIS) K1570. Wood preservatives. Japan Standards Association, Tokyo
Warner JE, Solomon KR (1990) Acidity as a factor in leaching of copper, chromium and arsenic from CCA-treated dimension lumber. Environ Toxicol Chem 9:1331–1337
van Eetevelde G, Orsler R, Holland G, Stevens M (1995) Effect of leaching temperature and water acidity on the loss of metal elements from CCA-treated timber in aquatic applications. Part 1: Laboratory-scale investigation. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 95-50046
Cooper PA, Jeremic D, Taylor JL, Ung YT (2000) Effect of humic acid on leaching of CCA from treated wood. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 00-50151
Hingston JA, Collins CD, Murphy RJ, Leater JN (2001) Leaching of chromated copper arsenate wood preservatives: a review. Environ Pollut 111:53–66
Crawford D, Fox R, Kamden P, Lebow S, Nicholas D, Pettry D, Schultz T, Sites L, Ziobro R (2002) Laboratory studies of CCA-C leaching: influence of wood and soil properties on extent of arsenic and copper depletion. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 02-50186
Venkatasamy R, Okwara DN (2005) The influence of soil pH on leaching of CCA elements from pressure-treated Eucalyptus saligna sapwood: environmental implication. International Research Group on Wood Protection, Document No. IRG/WP 03-50203
Albuquerque RM, Cragg SM, Icely JD (1995) Leaching from CCA-treated wood submerged in seawater: effects of high loadings, and a comparison between laboratory and marine conditions. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 96-50080
Lebow S (1997) Effects of fixation conditions and seawater on leaching of wood treated with marine retention CCA. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 97-50088
Kartal SN, Hwang W-J, Imamura Y (2007) Evaluation of effect of leaching medium on the release of copper, chromium, and arsenic from treated wood. Build Environ 42:1188–1193
Dubey B, Townsend T, Solo-Gabriele H, Bitton G (2007) Impact of surface water condition on preservative leaching and aquatic toxicity from treated wood products. Environ Sci Technol 41:3781–3786
Yamamoto K, Motegi S, Inai A (1999) Comparative study on the leaching of wood preservatives between natural exposure and accelerating laboratory conditions. International Research Group on Wood Preservation, Stockholm, Sweden, Document No. IRG/WP 99-50134
Chung PA, Ruddick JNR (2004) Leaching of copper from ACQ-treated wood exposed above ground. International Research Group on Wood Protection, Document No. IRG/WP 04-50219
Tsunoda K (1990) Effect of alkyl chain length on the fungicidal efficacy of benzalkonium chloride. J Antibact Antifung Agent Jpn 18:185–189
Loubinoux B, Malek H, Joly JP, Kilbertus G (1992) Interaction of quaternary ammonium salts with wood: influence of cation and anion structures on fixation and leaching. Forest Prod J 42:55–58
Miyauchi T, Mori M (2007) Improved quantitative determination of benzalkonium chloride in treated wood by liquid chromatography. Holzforschung 61:337–341
Japanese Standards Association (1998) Japan Industrial Standard (JIS) K1570. Quantitative standard and testing methods of wood preservatives. Japanese Standards Association, Tokyo
Zabielska-Matejuk J (2005) The influence of cation and anion structure of new quaternary ammonium salts on adsorption and leaching. Holzforschung 59:190–198
Preston AF, Walcheski PJ, McKaig PA, Nicholas DD (1978) Recent research on alkylammonium compounds in the US. Proc Am Wood Preserv Assoc 83:331–348
Jin L, Preston AF (1991) The interaction of wood preservatives with lignocellulosic substrates. Holzforschung 45:455–459
Loubinoux B, Malek H (1992) Interactions of quaternary ammonium salts with wood. Holzforschung 46:537–539
Doyle AK, Ruddick JNR (1994) The microdistribution of alkylammonium compounds in ponderosa pine sapwood. Holzforschung 48:106–112
Sexsmith FH, White HJ Jr (1959) The absorption of cationic surfactants by cellulosic materials I. The uptake of cation and anion by a variety of substrates. J Colloid Sci 14:598–618
Sexsmith FH, White HJ Jr (1959) The absorption of cationic surfactants by cellulosic materials III. A theoretical model for the absorption process and a discussion of maxima in absorption isotherms for surfactants. J Colloid Sci 14:630–639
Alila S, Boufi S, Belgacem MN, Beneventi D (2005) Adsorption of cationic surfactant onto cellulosic fibers I. Surface charge effects. Langmuir 21:8106–8113
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Miyauchi, T., Mori, M. & Imamura, Y. Leaching characteristics of homologues of benzalkonium chloride from wood treated with ammoniacal copper quaternary wood preservative. J Wood Sci 54, 225–232 (2008). https://doi.org/10.1007/s10086-007-0933-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10086-007-0933-5