Abstract
Segmented block copolymer based on nylon6 (N6) and polyethylene oxide (PEO) with stochiometric ratio was synthesized via a two-step process. The first step represents end capping of N6 in the presence of adipic acid leading to carboxy terminated N6, and the second one is polycondensation of the latter product with PEO in the presence of catalyst and thermostabilizer to form a high molecular weight multi-block copolymer. Several methods were applied to characterize the synthesized copolymer such as Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential thermal analysis, differential scanning calorimetry, X-ray diffraction and atomic force microscopy. The obtained results confirmed the multi-block structure for copolymer with a very high degree of micro-phase separation. Atomic force microscopy micrographs indicated that the morphology was the dispersion of high stiffness nanostructured polyamide (PA) domains in the amorphous region of PEO matrix, which can be very important in their performance for membrane processes.
Similar content being viewed by others
References
Rabania, G., Luftmannb, H. and Kraft, A., Polymer, 2005, 46: 27
Hatfield, G.R., Guo, Y., Roubicek, P. and Killinger, W.E., Macromolecules, 1993, 26: 6350
Clayden, N.J. and Pendlebury, R., Polymer, 2001, 42: 8373
Mallakpour, S. and Rafiemanzelat, F., Polym. Bull., 2007, 58: 339
Sheth, J.P., Xu, J. and Wilkes, G.L., Polymer, 2003, 44: 743
Chool, Y. and Jo, W., J. Appl. Polym. Sci., 1994, 54: 585
Alberola, N., J. Appl. Polym. Sci., 1988, 36: 787
Niesten, M.J., Feijen J., and Gaymans, R.J., Polymer, 2000, 41: 8487
Martijn, J., Van der, S. and Gaymans, R.J., Polymer, 2007, 48: 1998
Schollenberger, C., Scott, H. and Moore, G., Rubber Chem. Technol., 1962, 35: 742
Fakirov, S., Gornanov, K., Bosvelieva, E. and Chesne, A., Macromol. Chem., 1992, 193: 2391
Nelb, R.G., Chen, T., Onder, K., Legge, N.R., Holden, G. and Schroeder, H.E., “Thermoplastic elastomers: a comprehensive review”, Hanser Publishers, New York, 1987
Boulares, A., Tessier, M. and Marechal, E., Polymer, 2000, 41: 3561
Faruque, S. and Lacabanne, C., Polymer, 1986, 27: 527
Naturalium, R., Thesis, Department of Polymer Blend, Leibniz-Institute of Polymer Research Dresden, 2007
Gugliuzza, A. and Drioli, E., Polymer, 2003, 44: 2149
Barbucci, A., Delucchi, M. and Cerisola, G., Prog. Org. Coat., 1997, 30: 293
Nobile, M.A., Buonocore, G.G., Palmieri, L., Aldi, A. and Acierno, D., J. Food Eng., 2002, 53: 287
Mokrini, A. and Acosta, J.L., Polymer, 2001, 42: 9
Minghetti, P., Cilurzo, F., Liberti, V. and Montnari, L., Int. J. Pharm., 1997, 158: 67
Jung, B.O., Kim, T.J., Park, S.S. and Kim, J.J., J. Ind. Eng. Chem., 1990, 8: 57
Hsieh, K., Tsai, C. and Tseng, S., J. Membr. Sci., 1990, 49: 341
Kim, J.H., Ha, S.Y. and Lee, Y.M., J. Membr. Sci., 2001, 190: 179
Liu, L., Chakma, A. and Feng, X., Chem. Eng. Sci., 2006, 61: 6142
Sridhar, S., Suryamurali, R., Smitha, B. and Aminabhavi, T.M., Colloids Surf. A, 2007, 297: 267
Lin, H. and Freeman, B.D., J. Mol. Struct., 2005, 739: 57
Lin, H. and Freeman, B.D., J. Membr. Sci., 2004, 239: 105
Bondar, V.I., Freeman, B.D. and Pinnau, I., J. Polym. Sci. Part B: Polym. Phys., 2000, 38: 2051
Schuur, M., Boer, J. and Gaymans, R.J., Polymer, 2005, 46: 9243
Schuur, M. and Gaymans, R.J., Polymer, 2005, 46: 6862
Louie, J.S. Pinnau, I., Ciobanu, I., Ishida, K.P., Ng, A. and Reinhard, M., J. Membr. Sci., 2006, 280: 762
Sobhanmanesh, K. and Hajizadeh, A., Iran Polym. J., 2005, 14: 15
Candia, F., Petrocelli, V. and Russo, R., Polymer, 1986, 27: 797
Pavia, D.L., Lampman, G.M. and Kriz, G., “Introduction to spectroscopy” (Saunders Golden Sunburst Series), 2nd ed., Harcourt Brace College Publishers, Florida, 1996, Chapter 2
Chool, Y. and Jo, W., J. Appl. Polym. Sci., 1995, 56: 895
Wunderlich B., “Thermal analysis”. Academic Press, San Diego, 1990
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Peyravi, M., Ardestani, M.A., Babaluo, A.A. et al. Synthesis and characterization of nanostructured-segmented block copolyetheramide based on nylon6 and poly(ethylene oxide). Chin J Polym Sci 28, 597–605 (2010). https://doi.org/10.1007/s10118-010-9083-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-010-9083-0