Abstract
Development of modified plastics has been studied through the LDPE-acylated starch blend films to examine the effect of different acyl groups and degrees of substitution (DS) on properties of films. Corn starch was modified with acetyl and butyryl groups and films were prepared by blending acylated starch with low density polyethylene (LDPE). Systematic studies were done to observe the effect of acyl groups, DS and starch concentration on the properties and biodegradability of the blend films. It was observed that blend films containing 5% acetylated and butyrylated starches of high DS (2.5, 1.7) maintained 75% and 83% of tensile strength of LDPE films. Thermal analysis results indicated that acetylated and butyrylated starch blend films decomposed at 370 °C and 389 °C which were higher than the decomposition temperature of native starch film (349 °C). Scanning electron micrographs of blend films containing high DS acylated starch showed well dispersed starch particles due to improvement in dispersion between starch and LDPE. Water absorption capacity of high DS acetylated and butyrylated starch blend films (4.18% and 3.76%, respectively) was lower than that of native starch films (5%). This study has an advantage because of blown films prepared can be integrated with the present manufacturing systems without any other requirement.
Similar content being viewed by others
References
Rodriguez Gonzalez, F.J., Ramsay, B.A. and Favis, B.D., Polymer, 2003, 44: 1517
Kiatkamjornwong, S., Thakeowb, P. and Sonsukc, M., Polym. Degrad. Stab., 2001, 73: 363
Ke, Q.Q., Jiang, P.K., Wei, P., Wang, G.L. and Kim, C.N., Chinese, J. Polym. Sci., 2006, 24(6): 559
Duan, J., Shao, S., Li, Y., Wang, L., Jiang, P. and Liu, B., Iran. Polym. J., 2012, 21: 109
Nakamura, E.M., Cordi, L., Almeida, G.S.G., Duran, N. and Mei, L.H.I., J. Mater. Process Technol., 2005, 162: 236
Guohua, Z., Ya, L., Cuilan, F., Min, Z., Caiqiong, Z. and Zongdao, C., Polym. Degrad. Stab., 2006, 91: 703
Bikiaris, D., Prinos, J., Koutsopoulos, K., Vouroutzis, N., Pavlidou, E. and Frangis, N., Polym. Degrad. Stab., 1997, 59: 287
Averous, L., Fauconnier, N., Moro, L. and Fringant, C., J. Appl. Polym. Sci., 2000, 76: 1117
Aburto, J., Thiebaud, S., Alric, I., Borredon, E., Bikiaris, D., Prinos, J. and Panayiotou, C., Carbohydr Polym., 1997, 34: 101
Garlotta, D., Doane, W., Shogren, R., Lawton, J. and Willett, J.L., J. Appl. Polym. Sci., 2003, 88: 1775
Liu, X., Zhao, N., Yang, K., Wang, Y., Zheng, C., Li, S. and Zhang, Z., Iran. Polym. J., 2008, 17: 947.
Kim, M. and Lee, S., Carbohydr. Polym., 2002, 50: 331
Garg, S. and Jana, A.K., Eur. Polym. J., 2007, 43: 3976
Gupta, A.P., Kumar, V. and Sharma, M., J. Polym. Environ., 2011, 18: 484
Shogren, R.L., Carbohydr. Polym., 2003, 52: 319
Singh, N., Chawla, D. and Singh, J., Food Chem., 2004, 86: 601
Xu, W., WenYuan, G., LiMing, Z., PeiGen, X., LiPing, Y., Yi, L., KeFeng, L. and WeiGuang, X., Sci. China Ser. B: Chem., 2008, 51: 859
Guan, J. and Hanna, M.A., Bioresour. Technol., 2006, 97: 1716
Bikiaris, D., Pavlidou, E., Prinos, J., Aburto, J., Alric, I., Borredon, E. and Panayiotou, C., Polym. Degrad. Stab., 1998, 60: 437
Garg, S. and Jana, A.K., Carbohydr. Polym., 2011, 83: 1623
Sodhi, H.K., Sharma, K., Gupta, J.K. and Soni, S.K., Process Biochem., 2005, 40: 525
Thakore, I.M., Desai, S., Sarawade, B.D. and Devi, S., Eur. Polym. J., 2001, 37: 151
Song, X., He, G., Ruan, H. and Chen, Q., Starch/Stärke, 2006, 58: 109
Fang, J.M., Fowler, P.A., Tomkinson, J. and Hill, C.A.S., Carbohydr. Polym., 2002, 47: 245
Rioux, B., Ispas-Szabo, P., Ait-Kadi, A., Mateescu, M. and Juhasz, J., Carbohydr. Polym., 2002, 50: 371
Zobel, H.F., Methods in Carbohydrate Chemistry, Academic Press, New York, 1964, p. 109
Chi, H., Xu, K., Wu, X., Chen, Q., Xue, D., Song, C., Zhang, W. and Wang, P., Food Chem., 2007, 106: 923
Nikazar, M., Safari, B., Bonakdarpour, B. and Milani, Z., Iran Polym. J., 2005, 14: 1050
AHT-ONG, D. and Charoenkongthum, K., J. Met. Mater. Miner. 2002, 12: 1
Rudnik, E., Matuschek, G. and Milanov, N., Thermochim. Acta, 2005, 427: 163
Kiatkamjornwong, S., Thakeowb, P. and Sonsukc, M., Polym. Degrad. Stab., 2001, 73: 363
Follain, N., Joly, C., Dole, P. and Bliard, C., Carbohydr. Polym., 2005, 60: 185
Benedict, C.V., Cook, W.J., Jarrett, P., Cameron, J.A., Huang, S.J. and Bell, J.P., J. Appl. Polym. Sci., 1983, 28: 327
Wang, X., W., Zhang, Y. and Wang, Y., Acta Polymerica Sinica (in Chinese), 2011, (1): 24
Xu, Y.X. and Hanna, M.A., Carbohydr. Polym., 2005, 59: 521
Shogren, R.L., Doane, W.M., Garlotta, D., Lawton, J.W. and Willett, J.L., Polym. Degrad. Stab., 2003, 79: 405
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Garg, S., Jana, A.K. Preparation of LDPE-acetylated/butyrylated starch blend blow films and characterization. Chin J Polym Sci 32, 268–279 (2014). https://doi.org/10.1007/s10118-014-1403-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-014-1403-3