nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

02.08.2019 | ORIGINAL ARTICLE

Electroplating sludge handling by solidification/stabilization process: a comprehensive assessment using kaolinite clay, waste latex paint and calcium chloride cement additives

verfasst von: Florencio Ballesteros, Arceo Antonio Manila, Angelo Earvin Sy Choi, Ming Chun Lu

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This research examined the solidification/stabilization process of using a cement binder with actual electroplating sludge. An extensive comparative analysis was done with the cement–sludge mixture before and after the application of cement additives (kaolinite clay, waste latex paint and calcium chloride). The characterization analysis using the Fourier transform infrared spectrophotometer and X-ray diffraction analysis indicated the development of hydration at different cement mixtures. Through a comprehensive assessment of various cement additives, this study showed that the utilization of the admixtures in the cement binder could surpass the required standard unconfined compressive strength (350 kPa). Moreover, calcium chloride as its chemical additive (1704.5 kPa) was able to further aid the strength development against the control concrete (1151.5 kPa) at 28 days. In terms of the leaching tests, the use of cement additives has proved to successfully immobilize the heavy metals (Ag, Cu and Ni) in the cement–sludge matrix based on the toxicity characteristic leaching procedure. The results revealed an effective leaching resistance that leads to satisfying the stringent regulatory leaching requirements of the United States Environmental Protection Agency and the European Union Council (Ag ≤ 5.0 mg/L, Cu ≤ 0.6 mg/L and Ni ≤ 0.12 mg/L).

Vorheriger Artikel Resource and toxic characterization in end-of-life vehicles through dismantling survey

Nächster Artikel Extraction of rare earths by undiluted [P666,14][NO3] and DEHEHP, and the recovery of rare earths from lamp phosphors

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Tang Y, Chan SW, Shih K (2014) Copper stabilization in beneficial use of waterworks sludge and copper-laden electroplating sludge for ceramic materials. Waste Manag 34:1085–1091. https://doi.org/10.1016/j.wasman.2013.07.001 CrossRef

Mao L, Guo H, Zhang W (2018) Addition of waste glass for improving the immobilization of heavy metals during the use of electroplating sludge in the production of clay bricks. Constr Build Mater 163:875–879. https://doi.org/10.1016/j.conbuildmat.2017.12.177 CrossRef

Benvenuti T, Krapf RS, Rodrigues MAS, Bernardes AM, Zoppas-Ferreira J (2014) Recovery of nickel and water from nickel electroplating wastewater by electrodialysis. Sep Purif Technol 129:106–112. https://doi.org/10.1016/j.seppur.2014.04.002 CrossRef

Jeon C (2015) Adsorption behavior of silver ions from industrial wastewater onto immobilized crab shell beads. J Ind Eng Chem 32:195–200. https://doi.org/10.1016/j.jiec.2015.08.015 CrossRef

Li M, Su P, Guo Y, Zhang W, Mao L (2017) Effects of SiO₂, Al₂O₃ and Fe₂O₃ on leachability of Zn, Cu and Cr in ceramics incorporated with electroplating sludge. J Environ Chem Eng 5:3143–3150. https://doi.org/10.1016/j.jece.2017.06.019 CrossRef

de Freitas ED, de Almeida HJ, de Almeida Neto AF, Vieira MGA (2018) Continuous adsorption of silver and copper by Verde-lodo bentonite in a fixed bed flow-through column. J Clean Prod 171:613–621. https://doi.org/10.1016/j.jclepro.2017.10.036 CrossRef

Jacobson AR, McBride MB, Baveye P, Steenhuis TS (2005) Environmental factors determining the trace-level sorption of silver and thallium to soils. Sci Total Environ 345:191–205. https://doi.org/10.1016/j.scitotenv.2004.10.027 CrossRef

Drake PL, Hazelwood KJ (2005) Exposure-related health effects of silver and silver compounds: a review. Ann Occup Hyg 49:575–585. https://doi.org/10.1093/annhyg/mei019 CrossRef

Futalan CM, Kan CC, Dalida ML, Hsien KJ, Pascua C, Wan MW (2011) Comparative and competitive adsorption of copper, lead, and nickel using chitosan immobilized on bentonite. Carbohydr Polym 83:528–536. https://doi.org/10.1016/j.carbpol.2010.08.013 CrossRef

10.

Han R, Zou L, Zhao X, Xu Y, Xu F, Li Y, Wang Y (2009) Characterization and properties of iron oxide-coated zeolite as adsorbent for removal of copper(II) from solution in fixed bed column. Chem Eng J 149:123–131. https://doi.org/10.1016/j.cej.2008.10.015 CrossRef

11.

Bilal M, Shah JA, Ashfaq T, Gardazi SMH, Tahir AA, Pervez A, Haroon H, Mahmood Q (2013) Waste biomass adsorbents for copper removal from industrial wastewater-A review. J Hazard Mater 263:322–333. https://doi.org/10.1016/j.jhazmat.2013.07.071 CrossRef

12.

Ghorpade A, Ahammed MM (2017) Water treatment sludge for removal of heavy metals from electroplating wastewater. Environ Eng Res 23:92–98. https://doi.org/10.4491/eer.2017.065 CrossRef

13.

Amrane C, Bouhidel KE (2018) Integrated diffusion dialysis precipitation – Cementation for selective recovery of leaching chemicals and metal values from electroplating sludge. Hydrometallurgy 177:34–40. https://doi.org/10.1016/j.hydromet.2018.02.011 CrossRef

14.

Ya V, Martin N, Chou YH, Chen YM, Choo KH, Chen SS, Li CW (2018) Electrochemical treatment for simultaneous removal of heavy metals and organics from surface finishing wastewater using sacrificial iron anode. J Taiwan Inst Chem Eng 83:107–114. https://doi.org/10.1016/j.jtice.2017.12.004 CrossRef

15.

Evaristo AAA, Santos KCR, Costa LC, Marques MRC (2013) Evaluation of ion exchange resins for recovery of metals from electroplating sludge. Polym Bull 70:2239–2255. https://doi.org/10.1007/s00289-013-0944-x CrossRef

16.

Noah NFM, Jusoh N, Othman N, Sulaiman RNR, Parker NAMK (2018) Development of stable green emulsion liquid membrane process via liquid–liquid extraction to treat real chromium from rinse electroplating wastewater. J Ind Eng Chem 66:231–241. https://doi.org/10.1016/j.jiec.2018.05.034 CrossRef

17.

Zhang M, Chen C, Mao L, Wu Q (2018) Use of electroplating sludge in production of fired clay bricks: characterization and environmental risk evaluation. Constr Build Mater 159:27–36. https://doi.org/10.1016/j.conbuildmat.2017.10.130 CrossRef

18.

Mao L, Tang R, Wang Y, Guo Y, Su P, Zhang W (2018) Stabilization of electroplating sludge with iron sludge by thermal treatment via incorporating heavy metals into spinel phase. J Clean Prod 187:616–624. https://doi.org/10.1016/j.jclepro.2018.03.235 CrossRef

19.

Chen Q, Zhang L, Ke Y, Hills C, Kang Y (2009) Influence of carbonation on the acid neutralization capacity of cements and cement-solidified/stabilized electroplating sludge. Chemosphere 74:758–764. https://doi.org/10.1016/j.chemosphere.2008.10.044 CrossRef

20.

Desogus P, Manca PP, Orrù G, Zucca A (2013) Stabilization-solidification treatment of mine tailings using Portland cement, potassium dihydrogen phosphate and ferric chloride hexahydrate. Miner Eng 45:47–54. https://doi.org/10.1016/j.mineng.2013.01.003 CrossRef

21.

La Grega MD, Buckingham PL, Evans JC (1994) Hazardous Waste Management. McGraw-Hill, New York

22.

Shi C, Spence R (2004) Designing of cement-based formula for solidification/stabilization of hazardous, radioactive, and mixed wastes. Crit Rev Environ Sci Technol 34:391–417. https://doi.org/10.1080/10643380490443281 CrossRef

23.

Singh TS, Pant KK (2006) Solidification/stabilization of arsenic containing solid wastes using portland cement, fly ash and polymeric materials. J Hazard Mater 131:29–36. https://doi.org/10.1016/j.jhazmat.2005.06.046 CrossRef

24.

Cerbo AAV, Ballesteros F, Chen TC, Lu M-C (2017) Solidification/stabilization of fly ash from city refuse incinerator facility and heavy metal sludge with cement additives. Environ Sci Pollut Res 24:1748–1756. https://doi.org/10.1007/s11356-016-7943-z CrossRef

25.

Hills CD, Pollard SJT (1997) The influence of interference effects on the mechanical, microstructural and fixation characteristics of cement-solidified hazardous waste forms. J Hazard Mater 52:171–191. https://doi.org/10.1016/S0304-3894(96)01806-7 CrossRef

26.

Malviya R, Chaudhary R (2004) Study of the treatment effectiveness of a solidification/stabilization process for waste bearing heavy metals. J Mater Cycles Waste Manag 6:147–152. https://doi.org/10.1007/s10163-004-0113-2 CrossRef

27.

Fan Y, Zhang S, Kawashima S, Shah SP (2014) Influence of kaolinite clay on the chloride diffusion property of cement-based materials. Cem Concr Compos 45:117–124. https://doi.org/10.1016/j.cemconcomp.2013.09.021 CrossRef

28.

Almesfer N, Haigh C, Ingham J (2012) Waste paint as an admixture in concrete. Cem Concr Compos 34:627–633. https://doi.org/10.1016/j.cemconcomp.2012.02.001 CrossRef

29.

Almesfer N, Ingham J (2014) Effect of waste latex paint on concrete. Cem Concr Compos 46:19–25. https://doi.org/10.1016/j.cemconcomp.2013.10.017 CrossRef

30.

Mohammed A, Nehdi M, Adawi A (2008) Recycling waste latex paint in concrete with added value. ACI Mater J 105:367–374. https://doi.org/10.1016/S0008-8846(02)01084-0 CrossRef

31.

Torkittikul P, Chaipanich A (2012) Optimization of calcium chloride content on bioactivity and mechanical properties of white Portland cement. Mater Sci Eng, C 32:282–289. https://doi.org/10.1016/j.msec.2011.10.030 CrossRef

32.

Malliou O, Katsioti M, Georgiadis A, Katsiri A (2007) Properties of stabilized/solidified admixtures of cement and sewage sludge. Cem Concr Compos 29:55–61. https://doi.org/10.1016/j.cemconcomp.2006.08.005 CrossRef

33.

Kishar EA, Ahmed DA, Mohammed MR, Noury R (2013) Effect of calcium chloride on the hydration characteristics of ground clay bricks cement pastes. Beni-Suef Univ J Basic Appl Sci 2:20–30. https://doi.org/10.1016/j.bjbas.2013.09.003 CrossRef

34.

Kawai K, Hayashi A, Kikuchi H, Yokoyama S (2013) Desorption properties of heavy metals from cement hydrates in various chloride solutions. Constr Build Mater 67:55–60. https://doi.org/10.1016/j.conbuildmat.2013.11.029 CrossRef

35.

Berodier E, Gibson LR, Burns E, Roberts L, Cheung J (2018) Robust production of sustainable concrete through the use of admixtures and in-transit concrete management systems. Cem Concr Compos 101:52–66. https://doi.org/10.1016/j.cemconcomp.2018.01.008 CrossRef

36.

Riding K, Silva DA, Scrivener K (2010) Early age strength enhancement of blended cement systems by CaCl2 and diethanol-isopropanolamine. Cem Concr Res 40:935–946. https://doi.org/10.1016/j.cemconres.2010.01.008 CrossRef

37.

Dudek DA, Fedkiw PS (1999) Electrodeposition of copper from cuprous cyanide electrolyte II. Current distribution on a rotating disk. J Electroanal Chem 474:31–42. https://doi.org/10.1016/S0022-0728(99)00300-9 CrossRef

38.

Benham RR (1963) Silver plating. Anti-Corrosion Methods Mater 10:31–35. https://doi.org/10.1108/eb020038 CrossRef

39.

Gao X, Lo Y, Tam C, Chung C (1999) Analysis of the infrared spectrum and microstructure of hardened cement paste. Cem Concr Res 29:805–812. https://doi.org/10.1016/S0008-8846(98)00248-8 CrossRef

40.

Aleem SAE, Heikal M, Morsi WM (2014) Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica. Constr Build Mater 59:151–160. https://doi.org/10.1016/j.conbuildmat.2014.02.039 CrossRef

41.

Chrysochoou M, Dermatas D (2006) Evaluation of ettringite and hydrocalumite formation for heavy metal immobilization: literature review and experimental study. J Hazard Mater 136:20–33. https://doi.org/10.1016/j.jhazmat.2005.11.008 CrossRef

42.

Saikia NJ, Sengupta P, Gogoi PK, Borthakur PC (2002) Cementitious properties of metakaolin-normal Portland cement mixture in the presence of petroleum effluent treatment plant sludge. Cem Concr Res 32:1717–1724. https://doi.org/10.1016/S0008-8846(02)00865-7 CrossRef

43.

Katsioti M, Katsiotis N, Rouni G, Bakirtzis D, Loizidou M (2008) The effect of bentonite/cement mortar for the stabilization/solidification of sewage sludge containing heavy metals. Cem Concr Compos 30:1013–1019. https://doi.org/10.1016/j.cemconcomp.2008.03.001 CrossRef

44.

Mollah MYA, Kesmez M, Cocke DL (2004) An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) investigation of the long-term effect on the solidification/stabilization (S/S) of arsenic(V) in Portland cement type-V. Sci Total Environ 325:255–262. https://doi.org/10.1016/j.scitotenv.2003.09.012 CrossRef

45.

Malviya R, Chaudhary R (2006) Factors affecting hazardous waste solidification/stabilization: a review. J Hazard Mater 137:267–276. https://doi.org/10.1016/j.jhazmat.2006.01.065 CrossRef

46.

Jain N, Garg M (2008) Effect of Cr(VI) on the hydration behavior of marble dust blended cement: solidification, leachability and XRD analyses. Constr Build Mater 22:1851–1856. https://doi.org/10.1016/j.conbuildmat.2007.04.022 CrossRef

47.

Chen Q, Ke Y, Zhang L, Tyrer M, Hills CD, Xue G (2009) Application of accelerated carbonation with a combination of Na₂CO₃ and CO₂ in cement-based solidification/stabilization of heavy metal-bearing sediment. J Hazard Mater 166:421–427. https://doi.org/10.1016/j.jhazmat.2008.11.067 CrossRef

48.

Chen QY, Tyrer M, Hills CD, Yang XM, Carey P (2009) Immobilisation of heavy metal in cement-based solidification/stabilisation: a review. Waste Manag 29:390–403. https://doi.org/10.1016/j.wasman.2008.01.019 CrossRef

49.

Yin CY, Wan Ali WS, Lim YP (2008) Oil palm ash as partial replacement of cement for solidification/stabilization of nickel hydroxide sludge. J Hazard Mater 150:413–418. https://doi.org/10.1016/j.jhazmat.2007.04.119 CrossRef

50.

Pan HH, Wang C-K, Cheng Y-C (2016) Curing time and heating conditions for piezoelectric properties of cement-based composites containing PZT. Constr Build Mater 129:140–147. https://doi.org/10.1016/j.conbuildmat.2016.10.107 CrossRef

51.

He P, Shi C, Tu Z, Poon CS, Zhang J (2016) Effect of further water curing on compressive strength and microstructure of CO₂-cured concrete. Cem Concr Compos 72:80–88. https://doi.org/10.1016/j.cemconcomp.2016.05.026 CrossRef

52.

Elkhadiri I, Puertas F (2008) The effect of curing temperature on sulphate-resistant cement hydration and strength. Constr Build Mater 22:1331–1341. https://doi.org/10.1016/j.conbuildmat.2007.04.014 CrossRef

53.

Asavapisit S, Naksrichum S, Harnwajanawong N (2005) Strength, leachability and microstructure characteristics of cement-based solidified plating sludge. Cem Concr Res 35:1042–1049. https://doi.org/10.1016/j.cemconres.2004.07.041 CrossRef

54.

Zhang MH, Li H (2011) Pore structure and chloride permeability of concrete containing nano-particles for pavement. Constr Build Mater 25:608–616. https://doi.org/10.1016/j.conbuildmat.2010.07.032 CrossRef

55.

Chen YL, Ko MS, Lai YC, Chang JE (2011) Hydration and leaching characteristics of cement pastes made from electroplating sludge. Waste Manag 31:1357–1363. https://doi.org/10.1016/j.wasman.2010.12.018 CrossRef

56.

Hekal EE, Hegazi WS, Kishar EA, Mohamed MR (2011) Solidification/stabilization of Ni(II) by various cement pastes. Constr Build Mater 25:109–114. https://doi.org/10.1016/j.conbuildmat.2010.06.051 CrossRef

57.

Yavuz O, Altunkaynak Y, Guzel F (2003) Removal of copper, nickel, cobalt and manganese from aqueous solution by kaolinite. Water Res 37:948–952. https://doi.org/10.1016/S0043-1354(02)00409-8 CrossRef

58.

John UE, Jefferson I, Boardman DI, Ghataora GS, Hills CD (2011) Leaching evaluation of cement stabilisation/solidification treated kaolin clay. Eng Geol 123:315–323. https://doi.org/10.1016/j.enggeo.2011.09.004 CrossRef

59.

Lasheras-Zubiate M, Navarro-Blasco I, Fernández JM, Álvarez JI (2012) Encapsulation, solid-phases identification and leaching of toxic metals in cement systems modified by natural biodegradable polymers. J Hazard Mater 233–234:7–17. https://doi.org/10.1016/j.jhazmat.2012.06.028 CrossRef

Titel: Electroplating sludge handling by solidification/stabilization process: a comprehensive assessment using kaolinite clay, waste latex paint and calcium chloride cement additives
verfasst von: Florencio Ballesteros
Arceo Antonio Manila
Angelo Earvin Sy Choi
Ming Chun Lu
Publikationsdatum: 02.08.2019
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 6/2019
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-019-00903-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2019

Generation behavior of tar from ABS, PC, and PE during pyrolysis and steam gasification by mass spectrometry

Resource and toxic characterization in end-of-life vehicles through dismantling survey

Recovery of Ca(OH)2, CaCO3, and Na2SO4 from Moroccan phosphogypsum waste

Effect of substituting organic fraction of municipal solid waste with fruit and vegetable wastes on anaerobic digestion

Nitrification-related factors involved in the biochemical oxygen demand of leachate from inert-waste landfill site

Application of hydrogeological and biological research for the lysimeter experiment performance under simulated municipal landfill condition