nach oben

Cellulose

Erschienen in:

01.02.2014 | Original Paper

Rheological behavior of cellulose/silk fibroin blend solutions with ionic liquid as solvent

verfasst von: Yongbo Yao, Kanukai Susan Mukuze, Yumei Zhang, Huaping Wang

Erschienen in: Cellulose | Ausgabe 1/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The rheological behavior of cellulose and silk fibroin blend in 1-butyl-3-methylimidazolium chloride was studied. The data from the rheological results was analyzed to understand the microstructure of the blend solutions. The viscosity and dynamic modulus of the blend solution decreased with increasing ratio of silk fibroin. While comparing the experimental results with the calculated data from the log-additivity rule, it is revealed that zero-shear viscosity, dynamic modulus show positive–negative deviations and a typical continuous–discrete type of morphology could be imaged. At lower shear rate, the change of phase morphology took place at the ratio of about 0.5 volume fraction of cellulose. However, the blend solution showed positive deviations for all cellulose/silk fibroin blend ratios at high shear rate, which indicates that the dispersion of cellulose and silk fibroin was improved under shear stress. The properties of cellulose/silk fibroin blends observed by Fourier transform infrared spectroscopy and scanning electron microcopy agreed with the result from rheology.

Vorheriger Artikel Topical caffeine delivery using biocellulose membranes: a potential innovative system for cellulite treatment

Nächster Artikel Polyethylene glycol grafted cotton as phase change polymer

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Cao H, Chen X, Huang L, Shao Z (2009) Electrospinning of reconstituted silk fiber from aqueous silk fibroin solution. Mater Sci Eng C-Bio S 29(7):2270–2274CrossRef

Carreau P (1972) Rheological equations from molecular network theories. J Rheol 16(1):99–127CrossRef

Chambon F, Winter HH (1987) Linear viscoelasticity at the gel point of a cross-linking pdms with imbalanced stoichiometry. J Rheol 31(8):683–697CrossRef

Chen Y, Zhang LN (2004) Blend membranes prepared from cellulose and soy protein isolate in NaOH/thiourea aqueous solution. J Appl Polym Sci 94(2):748–757CrossRef

Chen X, Zhang Y, Wang H, Wang S-W, Liang S, Colby RH (2011) Solution rheology of cellulose in 1-butyl-3-methyl imidazolium chloride. J Rheol 55(3):485–494CrossRef

Colby RH, Boris DC, Krause WE, Dou S (2007) Shear thinning of unentangled flexible polymer liquids. Rheol Acta 46(5):569–575CrossRef

Corsini P, Perez-Rigueiro J, Guinea GV, Plaza GR, Elices M, Marsano E, Carnasciali MM, Freddi G (2007) Influence of the draw ratio on the tensile and fracture behavior of NMMO regenerated silk fibers. J Polym Sci Polym Phys 45(18):2568–2579CrossRef

Csihony S, Fischmeister C, Bruneau C, Horvath IT, Dixneuf PH (2002) First ring-opening metathesis polymerization in an ionic liquid. Efficient recycling of a catalyst generated from a cationic ruthenium allenylidene complex. New J Chem 26(11):1667–1670CrossRef

Dekkers M, Hobbs S, Watkins VH (1991) Mology and deformation-behavior of toughened blends of poly(butylene terephthalate), polycarbonate and poly(phenylene ether). Polymer 32(12):2150–2154CrossRef

Fink HP, Weigel P, Purz HJ, Ganster J (2001) Structure formation of regenerated cellulose materials from NMMO-solutions. Prog Polym Sci 26(9):1473–1524CrossRef

Freddi G, Romano M, Massafra MR, Tsukada M (1995) Silk fibroin/cellulose blend films:preparation, structure, and physical-properties. J Appl Polym Sci 56(12):1537–1545CrossRef

Gericke M, Schlufter K, Liebert T, Heinze T, Budtova T (2009) Rheological properties of cellulose/ionic liquid solutions: from dilute to concentrated states. Biomacromolecules 10(5):1188–1194CrossRef

Haward SJ, Sharma V, Butts CP, McKinley GH, Rahatekar SS (2012) Shear and extensional rheology of cellulose/ionic liquid solutions. Biomacromolecules 13(5):1688–1699CrossRef

Hirano S, Nakahira T, Zhang M, Nakagawa M, Yoshikawa M, Midorikawa T (2002) Wet-spun blend biofibers of cellulose-silk fibroin and cellulose-chitin-silk fibroin. Carbohydr Polym 47(2):121–124CrossRef

Holbrey JD, Rogers RD (2002) Green industrial applications of ionic liquids: technology review. In: Rogers RD, Seddon KR (eds) Ionic liquids: industrial applications for green chemistry. ACS Symposium Series. 818:446–458

Iannaccone A, Amitrano S, Pantani R (2013) Rheological and mechanical behavior of ethyl vinyl acetate/low density polyethylene blends for injection molding. J Appl Polym Sci 127(2):1157–1163CrossRef

Jiang G, Huang W, Li L, Wang X, Pang F, Zhang Y, Wang H (2012) Structure and properties of regenerated cellulose fibers from different technology processes. Carbohydr Polym 87(3):2012–2018CrossRef

Kobayashi K, Huang CI, Lodge TP (1999) Thermoreversible gelation of aqueous methylcellulose solutions. Macromolecules 32(21):7070–7077CrossRef

Kock C, Gahleitner M, Schausberger A, Ingolic E (2013) Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, part 1: interaction between rheology and morphology. J Appl Polym Sci 128(3):1484–1496

Laidler KJ (1984) The development of the Arrhenius equation. J Chem Educ 61(6):494–498

Liu W, Budtova T (2012) Ionic liquid: a powerful solvent for homogeneous starch-cellulose mixing and making films with tuned morphology. Polymer 53(25):5779–5787

Marsano E, Corsini P, Canetti M, Freddi G (2008) Regenerated cellulose-silk fibroin blends fibers. Int J Biol Macromol 43(2):106–114CrossRef

Moly KA, Oommen Z, Bhagawan SS, Groeninckx G, Thomas S (2002) Melt rheology and morphology of LLDPE/EVA blends: effect of blend ratio, compatibilization, and dynamic crosslinking. J Appl Polym Sci 86(13):3210–3225CrossRef

Nandan B, Kandpal LD, Mathur GN (2004) Poly(ether ether ketone)/poly(aryl ether sulfone) blends: melt rheological behavior. J Polym Sci Polym Phys 42(8):1548–1563CrossRef

Phillips DM, Drummy LF, Conrady DG, Fox DM, Naik RR, Stone MO, Trulove PC, De Long HC, Mantz RA (2004) Dissolution and regeneration of Bombyx mori silk fibroin using ionic liquids. J Am Chem Soc 126(44):14350–14351CrossRef

Phillips DM, Drummy LF, Naik RR, De Long HC, Fox DM, Trulove PC, Mantz RA (2005) Regenerated silk fiber wet spinning from an ionic liquid solution. J Mater Chem 15(39):4206–4208CrossRef

Roubroeks JP, Kondo T (2012) Nano- and microstructures in stretched and non-stretched blend gels of cellulose and hemicelluloses. Holzforschung 66(8):993–1000CrossRef

Shang S, Zhu L, Fan J (2011) Physical properties of silk fibroin/cellulose blend films regenerated from the hydrophilic ionic liquid. Carbohydr Polym 86(2):462–468CrossRef

Shi X, Lu A, Cai J, Zhang L, Zhang H, Li J, Wang X (2012) Rheological behaviors and miscibility of mixture solution of polyaniline and cellulose dissolved in an aqueous system. Biomacromolecules 13(8):2370–2378CrossRef

Sjoholm E, Gustafsson K, Eriksson B, Brown W, Colmsjo A (2000) Aggregation of cellulose in lithium chloride/N,N-dimethylacetamide. Carbohydr Polym 41(2):153–161CrossRef

Sun N, Rodriguez H, Rahman M, Rogers RD (2011) Where are ionic liquid strategies most suited in the pursuit of chemicals and energy from lignocellulosic biomass? Chem Commun 47(5):1405–1421CrossRef

Swatloski RP, Spear SK, Holbrey JD, Rogers RD (2002) Dissolution of cellose with ionic liquids. J Am Chem Soc 124(18):4974–4975CrossRef

Utracki L (1983) Melt flow of polymer blends. Polym Eng Sci 23:602CrossRef

Utracki L (2002) Polymer blends handbook. Kluwer Academic Publishers, Dordrecht

Wang Q, Yang Y, Chen X, Shao Z (2012) Investigation of rheological properties and conformation of silk fibroin in the solution of AmimCl. Biomacromolecules 13(6):1875–1881CrossRef

Zhu X, Chen X, Wang X, Saba H, Zhang Y, Wang H (2013) Understanding the interactions in acrylic copolymer/1-butyl-3-methylimidazolium chloride from solution rheology. Polym Adv Technol 24(1):90–96CrossRef

Titel: Rheological behavior of cellulose/silk fibroin blend solutions with ionic liquid as solvent
verfasst von: Yongbo Yao
Kanukai Susan Mukuze
Yumei Zhang
Huaping Wang
Publikationsdatum: 01.02.2014
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 1/2014
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-013-0117-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2014

Novel method for ultraviolet protection and flame retardancy of cotton fabrics by low-temperature plasma

Mechanical properties of films made from dialcohol cellulose prepared by homogeneous periodate oxidation

Polyethylene glycol grafted cotton as phase change polymer

Growing degree days is the dominant factor associated with cellulose deposition in cotton fiber

Effects of plasma treatments for improving extreme wettability behavior of cotton fabrics

Tough nanocomposite hydrogels from cellulose nanocrystals/poly(acrylamide) clusters: influence of the charge density, aspect ratio and surface coating with PEG