Abstract
Biodrying is a process that consists in reducing the moisture content of different organic wastes to obtain a useful product, such as fuel, or as a previous step to landfilling. This is achieved by using the heat generated in the aerobic fermentation of organic compounds. The main parameters that control the process are aeration, the temperature reached in fermentation and the initial level of moisture. In this work, the substrate was composed of agricultural harvest and gardening waste from an area in the east of Spain. The biodrying process was carried out in a greenhouse, where both the heat generated in the fermentation and the heat of the sun were used. In order to promote aeration, two factors were taken into account: One was the capacity of the shredded prunings to act as a bulking agent, and the other one was a perforated floor, which allowed air to pass through. An air outlet was installed at the top of the greenhouse to promote the “chimney effect.” With this setup, drying times of 12–30 days were achieved (depending on the month), together with volume reductions greater than 50 %. The time of the trial has been assessed when the waste has received 75 kW/m2 by insolation. The final waste with a low level of moisture (7–15 %) had a heating value suitable for use as fuel (around 15,000 kJ/kg).
Similar content being viewed by others
References
Adani, F., Baido, D., Calcaterra, E., & Genevini, P. (2002). The influence of biomass temperature on biostabilization–biodrying of municipal solid waste. Bioresource Technology, 83, 173–179.
Barrena, R., Vázquez, F., & Sánchez, A. (2006). The use of respiration indices in the composting process: A review. Waste Management & Research, 24(1), 37–47.
Choi, H. L., Richard, T. L., & Ahn, H. K. (2001). Composting high moisture materials: Biodrying poultry manure in a sequentially fed reactor. Compost Science and Utilization, 9, 303–311.
Collick, A. S., Inglish, S., Wright, P., Steenhuis, T. S., & Bowman, D. D. (2007). Inactivation of Ascaris suum in a biodrying compost system. Journal of Environmental Quality, 36, 1528–1533.
Dieu, T. T. M. (2006). Greening food processing industries in Vietnam: Opportunities and constraints. Environment, Development and Sustainability, 8, 229–249.
Frei, K., Cameron, D., & Stuart, P. (2004). Novel drying process using forced aeration through a porous biomass matrix. Drying Technology, 22(5), 1191–1215
Funes-Monzote, F. R., Monzote, L., Lantinga, E. A., & van Keulen, H. (2009). Conversion of specialised dairy farming systems into sustainable mixed farming systems in Cuba. Environment, Development and Sustainability, 11, 765–783.
Godley, A., Lewin, K., Frederickson, J.; Smith, R., & Blakey, N. (2007). In: Application of DR4 and BM100 biodegradability tests to treated and untreated organic wastes, Proceedings Sardinia, Eleventh International Waste Management and Landfill Symposium, S. Margherita di Pula, Cagliari, Italy, 1-5 October, S. Margherita di Pula, Cagliari, Italy, p. 225.
He, P., Tang, J., Zhang, D., Zeng, Y., & Shao, L. (2010). Release of volatile organic compounds during bio-drying of municipal solid waste. Journal of Environmental Science, 22(5), 725–759.
ISO 1171: (1997). Solid mineral fuels—Determination of ash.
ISO 1928:1995. Solid mineral fuels—Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value.
ISO 5068-1 (2007). Brown coals and lignites—Determination of moisture content—Part 1: Indirect gravimetric method for total moisture.
Liang, C., Das, K. C., & McClendon, R. W. (2003). The influence of temperature and moisture contents regimes on the aerobic microbial activity of biosolids composting blend. Bioresource Technology, 86(2), 131–137.
Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (2006). Emerging biodrying technology for the drying of pulp and paper mixed sludges. Drying Technology, 24, 863–876.
Navaee-Ardeh, S., Bertrand, F., & Stuart, P. R. (2010). Key variables analysis of a novel continuous biodrying process for drying mixed sludge. Bioresource Technology, 101, 3379–3387.
Pimentel, D., Lal, R., & Singmaster, J. (2010). Carbon capture by biomass and soil are sound: CO2 burial wastes energy. Environment, Development and Sustainability, 12, 447–448.
Rada, E. C., Istrate, I. A., & Ragazzi, M. (2009). Trends in the management of the residual municipal solid waste. Environmental Technology, 30(7), 651–661.
Ragazzi, M., Rada, E. C., & Antolini, D. (2011). Material and energy recovery in integrated waste management systems: An innovative approach for the characterization of the gaseous emissions from residual MSW bio-drying. Waste Management, 31(9–10), 2085–2091.
Robles-Martínez, F., Silva-Rodríguez, E. M., Espinosa-Solares, T., Piña-Guzmán, A. B., Calixto-Mosqueda, C., Colomer-Mendoza, F. J., et al. (2012). Biodrying under greenhouse conditions as pretreatment for horticultural waste. Journal of Environmental Protection, 3(4), 298–303.
Shao, L.-M., Ma, Z.-H., Zhang, H., Zhang, D.-Q., & He, P.-H. (2010). Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery. Waste Management, 30, 1165–1170.
Stasta, P., Boran, J., Bebar, L., Stehlik, P., & Oral, J. (2006). Thermal processing of sewage sludge. Applied Thermal Engineering, 26, 1420–1426.
Sugni, M., Calcaterra, E., & Adani, F. (2005). Biostabilization-biodrying of municipal solid waste by inverting air-flow. Bioresource Technology, 96, 1331–1337.
Tambone, F., Scaglia, B., & Scotti, S. (2011). Effects of biodrying process on municipal solid waste properties. Bioresource Technology, 102(16), 7443–7450.
Tremier, A., de Guardia, A., Massiani, C., Paul, E., & Martel, J. L. (2005). A respirometric method for characterising the organic composition and biodegradation kinetics and the temperature influence on the biodegradation kinetics, for a mixture of sludge and bulking agent to be co-composted. Bioresource Technology, 96(2), 169–180.
Velis, C. A., Longhurst, P. J., Drew, G. H., Smith, R., & Pollard, S. T. J. (2009). Biodrying for mechanical-biological treatment of wastes: A review of process science and engineering. Bioresource Technology, 100, 2747–2752.
Velis, C. A., Longhurst, P. J., Drew, G. H., Smith, R., & Pollard, S. J. T. (2010). Production and quality assurance of solid recovered fuels using mechanical-biological treatment (MBT) of waste: A comprehensive assessment. Critical Reviews in Environment Science and Technology, 40(12), 979–1105.
Velis, C., Wagland, S., Longhurst, P., Robson, B., Sinfield, K., Wise, S., et al. (2012). Solid recovered fuel: Influence of waste stream composition and processing on chlorine content and fuel quality. Environmental Science and Technology, 46, 1923–1931.
Wagland, S. T., Godley, A. R., & Tyrrel, S. F. (2011). Investigation of the application of an enzyme-based biodegradability test method to a municipal solid waste biodrying process. Waste Management, 31, 1467–1471.
Wagland, S. T., Godley, A. R., Tyrrel, S. F., & Smith, R. (2009). Test methods to aid in the evaluation of the diversion of biodegradable municipal waste (BMW) from landfill. Waste Management, 29(3), 1218–1226.
Xu, H., He, P., Wang, G., Shao, L., & Lee, D. (2011). Anaerobic storage as a pretreatment for enhanced biodegradability of dewatered sewage sludge. Bioresource Technology, 102, 667–671.
Zambra, C. E., Rosales, C., Moraga, N. O., & Ragazzi, M. (2011). Self-heating in a bioreactor: Coupling of heat and mass transfer with turbulent convection. International Journal of Heat and Mass Transfer, 54, 23–24.
Zawadzka, A., Krzystek, L., & Stanilaw, L. (2010). Autothermal biodrying of municipal solid waste with high moisture content. Chemical Papers, 64(2), 265–268.
Zhang, D., He, P., & Shao, L. (2009a). Potential gases emissions from the combustion of municipal solid waste by bio-drying. Journal of Hazardous Material, 168, 1497–1503.
Zhang, D., He, P., Shao, L., Jin, T., & Han, J. (2008). Biodrying of municipal solid waste with high water content by combined hydrolytic-aerobic technology. Journal of Environmental Science, 20, 1534–1540.
Zhang, D., He, P., Yu, L.-Z., & Shao, L. (2009b). Effect of inoculation time on the bio-drying performance of combined hydrolytic-aerobic process. Bioresource Technology, 100, 1087–1093.
Zhao, L., Gu, W.-M., He, P.-J., & Shao, L.-M. (2011). Biodegradation potential of bulking agents used in sludge bio-drying and their contribution to bio-generated heat. Water Research, 45, 2322–2330.
Acknowledgments
The authors are grateful to the Spanish Ministry of Science and Innovation for funding for this study (Project ACI2009-0993) in the program “Convocatoria de Ayudas del Programa Nacional de Internacionalización de la I + D. Subprograma de Fomento de la Cooperación Científica Internacional (ACI-PROMOCIONA).” We also wish to thank our colleague Ms Sara Romero, because of her help in the works.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Colomer-Mendoza, F.J., Robles-Martinez, F., Herrera-Prats, L. et al. Biodrying as a biological process to diminish moisture in gardening and harvest wastes. Environ Dev Sustain 14, 1013–1026 (2012). https://doi.org/10.1007/s10668-012-9369-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10668-012-9369-1