Abstract
Analytical results for a penny-shaped crack with a plastic zone at the crack front are given. The crack is embedded in an infinite transversely isotropic elastic medium and is assumed to be subjected to two identical axisymmetric loads on the upper and lower crack faces. The size of the plastic zone at the crack front is determined by applying Dugdale hypothesis to the elasticity results for a penny-shaped crack. The size of the plastic zone is derived in terms of hyper-geometric functions. Expression of the normal stress outside the plastic zone is also given.
Similar content being viewed by others
References
Chaiyat S, Jin X, Keer LM, Kiattikomol K (2008) Analytical and numerical evaluation of crack-tip plasticity of an axisymmetrically loaded penny-shaped crack. Compt. Rendus Mec. 336: 54–68
Chernyakov YA, Grychanyuk V, Tsukrov I (2003) Stress-strain relations in elastoplastic solids with Dugdale-type cracks. Eng. Fract. Mech. 70: 2163–2174
Danyluk HT, Singh BM, Vrbik J (1995) A dugdale-type estimation of the plastic zone for a penny-shaped crack in a thick transversely isotropic layer due to radial shear. Eng. Fract. Mech. 5: 735–740
Ding HJ, Chen WQ, Zhang LC (2006) Elasticity of Transversely Isotropic Materials. Springer, Dordrecht
Dugdale DS (1960) Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8: 100–104
Fabrikant VI (1989) Application of Potential Theory in Mechanics: A Section of New Results. Kluwer Academic Pulishers, Dordrecht, The Netherlands
Ferdjani H (2009) Study of an infinite strip containing a Dugdale crack parallel to its boundaries under anti-plane shear loading. European Journal of Mechanics - A/Solids 28: 347–353
Galatenko GV (1989) Generalized-model of a Dugdale crack. Int. Appl. Mech. 25: 260–265
Gao H, Zhang T, Tong P (1997) Local and global energy release rates for an electrically yielded crack in a piezoelectric ceramic. J. Mech. Phys. Solids 45: 491–510
Gradsbteyn IS, Ryzbik LM (2004) Table of Integrals, series and Products (sixth edition). Elsevier Pte Ltd.
Griffith AA (1921) The phenomena of rupture and flow in solids. Philos. Trans. Roy. Soc. London Ser. A 221: 163–198
Jin XQ, Chaiyat S, Keer LM, Kiattikomol K (2008) Refined Dugdale plastic zones of an external circular crack. J. Mech. Phys. Solids. 56: 1127–1146
Lebedev NN (1965) Special functions and their applications. Prentice-Hall, Inc, London
Maugis D (1992) Adhesion of spheres-the JKR-DMT transition using a Dugdale model. J. Colloid Interf. Sci. 150: 243–269
Maugis D (2000) Contact, Adhesion, and Rupture of Elastic Solids. Springer, Berlin, New York
Olesiak Z, Wnuk M (1968) Plastic energy dissipation due to a penny-shaped crack. Int. J. Fract. Mech. 4: 383–395
Petroski HJ (1979) Dugdale plastic zone sizes for edge cracks. International Journal of Fracture 15: 217–230
Zhao MH, Shen YP, Liu GN, Liu YJ (1999) Dugdale model solutions for a penny-shaped crack in three-dimensional transversely isotropic piezoelectric media by boundary-integral equation method. Engineering Analysis with Boundary Elements 23: 573–576
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, X.Y., Yang, D., Chen, W.Q. et al. Penny-Shaped Dugdale Crack in a Transverse Isotropic Medium. Int J Fract 176, 207–214 (2012). https://doi.org/10.1007/s10704-012-9720-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-012-9720-4