Abstract
The copper content of electroless Ni–Cu–P-plated polyester fabric mainly depends on the copper ion concentration in the plating solution, which in turn has a significant effect on the properties of the coatings. The effects of copper sulphate concentration (CuSO4) on the deposition rate, composition, surface morphology, crystal structure, surface resistance and electromagnetic interference (EMI) shielding effectiveness of electroless Ni–Cu–P deposits were investigated. The results show that the copper content in the deposits increased significantly, whereas nickel content decreased significantly and phosphorus content decreased slightly with a higher copper ion concentration. Compact coating layers were obtained with a nodular morphology. With increase of copper ion concentration in the solution, the crystallinity of the deposits also increased. In addition, the surface resistance decreased and the EMI shielding effectiveness of the Ni–Cu–P deposits increased.
Similar content being viewed by others
References
Wu GH, Huang XL, Dou ZY, Chen S, Jiang LT (2007) J Mater Sci 42:2633
Yang YL, Guptai MC, Dudley KL (2007) Nanotechnology 18:345701
Paris Innovation 128 (1996) Technology Trend 1996 Electromagnetic Interference shielding-A Materials Perspective, Innovation 128, S. A. Paris
Kwon OS, Jung JC, Yoo YH (1983) Polymer (Korea) 7:342
Yasufuku S (1995) IEEE Electr Insul Mag 6:947
William CS (1988) J Coat Fabrics 17:243
Bula K, Koprowska J, Janukiewicz J (2006) Fibers & Text in East Eur 14:75
Jiang SQ, Newton E, Yuen CWM, Kan CW (2006) Text Res J 76:57
Han EG, Kim EA, Oh KW (2001) Synth Met 123:469
Mallory GO, Hadju JB (1990) Electroless plating. AESF, Orlando Florida
Riedel W (1991) Electroless nickel plating. Finishing Publishers Ltd, England
Krasteva N, Fotty V, Armyanov S (1994) J Electrochem Soc 141:2864
Wang YW, Xiao CG, Deng ZG (1992) Plat Surf Finish 79:57
Lee CY, Lin KL (1994) J Appl Phys Part 1 33:4708
Hur KH, Jeong JH, Lee DN (1991) J Mater Sci 26:2037
Yuen CWM, Jiang SQ, Kan CW (2007) Appl Surf Sci 253:5250
Simor M, Rahel J, Cernak M (2003) Surf Coat Technol 172:1
Jiang SQ, Kan CW, Yuen CWM (2008) J Appl Poly Sci 108:2630
Ashassi-Sorkhabi H, Dolati H, Parvini-Ahmadi N, Manzoori J (2002) Appl Surf Sci 185:155
Lelental M (1975) J Electrochem Soc 122(4):486
Armyanov S, Georgieva J, Tachev D (1999) Electrochem Solid State Lett 2:323
Georgieva J, Armyanov S (2007) J Solid State Electrochem 11:869
Chen CH, Chen BH, Hong L (2006) Chem Mater 18:2959
Jones (1992) Principles and prevention of corrosion, Chap. 2. Macmillan Publishing Company, New York
Chen CJ, Lin KL (1999) J Electrochem Soc 146:137
Zhong LL, Liu CC, U. S. Pat. 6,410,104
Baskaran I, Sankara Narayanan TSN, Stephen A (2006) Mater Chem Phys 99:117
Paul CR (ed) (1992) Introduction of electromagnetic compatibility. Wiley, New York
Gao Y, Huang L, Zheng ZJ, Li H, Zhu M (2007) Appl Surf Sci 253:9470
Acknowledgements
The authors acknowledge the financial support of The Hong Kong Polytechnic University and the technical support of the Materials Research Centre of The Hong Kong Polytechnic University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo, R.H., Jiang, S.Q., Yuen, C.W.M. et al. Effect of copper content on the properties of Ni–Cu–P plated polyester fabric. J Appl Electrochem 39, 907–912 (2009). https://doi.org/10.1007/s10800-008-9736-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10800-008-9736-7