nach oben

Journal of Materials Science

Erschienen in:

24.01.2018 | Review

A review of non-destructive techniques used for mechanical damage assessment in polymer composites

Erschienen in: Journal of Materials Science | Ausgabe 11/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Polymer composite materials are being increasingly used in primary load-bearing structures in several advanced industrial fields such as aerospace vessels, railway wagons and mega-scaled wind turbines where detection of subcritical damage initiation can significantly reduce safety issues and maintenance costs. It is therefore crucial to inspect these composite structures in order to assess their structural health and to ensure their integrity. Non-destructive testing techniques (NDT) are used for this purpose, making it possible to monitor mechanical damage of composite materials under in situ or ex situ service conditions. This paper reviews the capabilities of the most common NDT techniques used to inspect the integrity of composite materials. Each technique has a detection potential and cannot allow a full diagnosis of the mechanical damage state of the material. Thus, depending on the occurring damage mechanism and the conditions of use, one technique will be preferred over another, or several techniques should be combined to improve the diagnosis of the damage state of the structures.

Vorheriger Artikel Ronald Leslie Bell: 12th September 1929–25th December 2017

Nächster Artikel Self-sensing and mechanical performance of CNT/GNP/UHMWPE biocompatible nanocomposites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Passipoularidis VA, Philippidis TP, Brondsted P (2011) Fatigue life prediction in composites using progressive damage modelling under block and spectrum loading. Int J Fatigue 33(2):132–144. https://doi.org/10.1016/j.ijfatigue.2010.07.011 CrossRef

Post NL, Case SW, Lesko JJ (2008) Modeling the variable amplitude fatigue of composite materials: a review and evaluation of the state of the art for spectrum loading. Int J Fatigue 30(12):2064–2086. https://doi.org/10.1016/j.ijfatigue.2008.07.002 CrossRef

Su Z, Ye L, Lu Y (2006) Guided Lamb waves for identification of damage in composite structures: a review. J Sound Vib 295(3–5):753–780. https://doi.org/10.1016/j.jsv.2006.01.020 CrossRef

Hung Y, Chen YS, Ng S, Liu L, Huang Y, Luk B, Ip R, Wu C, Chung P (2009) Review and comparison of shearography and active thermography for nondestructive evaluation. Mater Sci Eng R Rep 64(5):73–112CrossRef

Francis D, Tatam R, Groves R (2010) Shearography technology and applications: a review. Meas Sci Technol 21(10):102–131CrossRef

Zhu Y-K, Tian G-Y, Lu R-S, Zhang H (2011) A review of optical NDT technologies. Sensors 11(8):7773–7798CrossRef

Jolly M, Prabhakar A, Sturzu B, Hollstein K, Singh R, Thomas S, Foote P, Shaw A (2015) Review of non-destructive testing (NDT) techniques and their applicability to thick walled composites. Procedia CIRP 38:129–136CrossRef

Li D, Ho S-CM, Song G, Ren L, Li H (2015) A review of damage detection methods for wind turbine blades. Smart Mater Struct 24(3):33–57CrossRef

Mitra M, Gopalakrishnan S (2016) Guided wave based structural health monitoring: a review. Smart Mater Struct 25(5):53–80CrossRef

10.

Raghavan A, Cesnik CE (2007) Review of guided-wave structural health monitoring. Shock Vib Dig 39(2):91–116CrossRef

11.

Sun Z, Rocha B, Wu K-T, Mrad N (2013) A methodological review of piezoelectric based acoustic wave generation and detection techniques for structural health monitoring. Int J Aerosp Eng 2013:66–68CrossRef

12.

Smith R, Xie N, Hallett S (2016) Non-destrucitve characterisation of composite microstructures. JEC Compos Mag 109:59–61

13.

Hild F, Bouterf A, Roux S (2015) Damage measurements via DIC. Int J Fract 191(1–2):77–105CrossRef

14.

Gholizadeh S (2016) A review of non-destructive testing methods of composite materials. Procedia Struct Integr 1:50–57CrossRef

15.

Awaja F, Zhang S, Tripathi M, Nikiforov A, Pugno N (2016) Cracks, microcracks and fracture in polymer structures: formation, detection, autonomic repair. Prog Mater Sci 83:536–573CrossRef

16.

Böhm R, Hufenbach W (2010) Experimentally based strategy for damage analysis of textile-reinforced composites under static loading. Compos Sci Technol 70(9):1330–1337. https://doi.org/10.1016/j.compscitech.2010.04.008 CrossRef

17.

Ettouney M, Alampalli S (2013) Review of infrastructure health in civil engineering, volume II: applications and management. Journal of Performance of Constructed Facilities, Reston, pp 248–277

18.

Peng T, Liu Y, Saxena A, Goebel K (2015) In-situ fatigue life prognosis for composite laminates based on stiffness degradation. Compos Struct 132:155–165. https://doi.org/10.1016/j.compstruct.2015.05.006 CrossRef

19.

Montesano J, Fawaz Z, Bougherara H (2015) Non-destructive assessment of the fatigue strength and damage progression of satin woven fiber reinforced polymer matrix composites. Compos Part B Eng 71:122–130CrossRef

20.

Arif MF, Saintier N, Meraghni F, Fitoussi J, Chemisky Y, Robert G (2014) Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66. Compos Part B Eng 61:55–65CrossRef

21.

Rolland H, Saintier N, Robert G (2016) Damage mechanisms in short glass fibre reinforced thermoplastic during in situ microtomography tensile tests. Compos Part B Eng 90:365–377. https://doi.org/10.1016/j.compositesb.2015.12.021 CrossRef

22.

Yu B, Blanc R, Soutis C, Withers P (2016) Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension–tension loading observed by time-lapse X-ray tomography. Compos Part A Appl Sci Manuf 82:279–290CrossRef

23.

Berthelot J, Rhazi J (1990) Acoustic emission in carbon fibre composites. Compos Sci Technol 37(4):411–428CrossRef

24.

Kordatos EZ, Dassios KG, Aggelis DG, Matikas TE (2013) Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission. Mech Res Commun 54:14–20. https://doi.org/10.1016/j.mechrescom.2013.09.005 CrossRef

25.

Chou HY, Mouritz AP, Bannister MK, Bunsell AR (2015) Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure. Compos Part A Appl Sci Manuf 70:111–120. https://doi.org/10.1016/j.compositesa.2014.11.027 CrossRef

26.

Masmoudi S, El Mahi A, Turki S (2016) Fatigue behaviour and structural health monitoring by acoustic emission of E-glass/epoxy laminates with piezoelectric implant. Appl Acoust 108:50–58. https://doi.org/10.1016/j.apacoust.2015.10.024 CrossRef

27.

Momon S, Moevus M, Godin N, R’Mili M, Reynaud P, Fantozzi G, Fayolle G (2010) Acoustic emission and lifetime prediction during static fatigue tests on ceramic-matrix-composite at high temperature under air. Compos Part A Appl Sci Manuf 41(7):913–918. https://doi.org/10.1016/j.compositesa.2010.03.008 CrossRef

28.

Huguet S, Godin N, Gaertner R, Salmon L, Villard D (2002) Use of acoustic emission to identify damage modes in glass fibre reinforced polyester. Compos Sci Technol 62(10):1433–1444CrossRef

29.

Doan DD, Ramasso E, Placet V, Zhang S, Boubakar L, Zerhouni N (2015) An unsupervised pattern recognition approach for AE data originating from fatigue tests on polymer–composite materials. Mech Syst Signal Process 64:465–478. https://doi.org/10.1016/j.ymssp.2015.04.011 CrossRef

30.

Skawinski O, Hulot P, Binétruy C, Rasche C (2008) Structural integrity evaluation of CNG composite cylinders by acoustic emission monitoring. J Acoust Emiss 26:120–131

31.

Krawczak P, Pabiot J (1994) Acoustic emission applied to glass fibre/organic thermosetting matrix interface characterization. Appl Compos Mater 1(5):373–386CrossRef

32.

Calabrese L, Campanella G, Proverbio E (2012) Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete. Constr Build Mater 34:362–371. https://doi.org/10.1016/j.conbuildmat.2012.02.046 CrossRef

33.

Godin N, Huguet S, Gaertner R (2005) Integration of the Kohonen’s self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites. NDT and E Int 38(4):299–309. https://doi.org/10.1016/j.ndteint.2004.09.006 CrossRef

34.

Pomponi E, Vinogradov A (2013) A real-time approach to acoustic emission clustering. Mech Syst Signal Process 40(2):791–804. https://doi.org/10.1016/j.ymssp.2013.03.017 CrossRef

35.

Kharrat M, Placet V, Ramasso E, Boubakar ML (2016) Influence of damage accumulation under fatigue loading on the AE-based health assessment of composite materials: wave distortion and AE-features evolution as a function of damage level. Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2016.03.020

36.

Marec A, Thomas JH, El Guerjouma R (2008) Damage characterization of polymer-based composite materials: multivariable analysis and wavelet transform for clustering acoustic emission data. Mech Syst Signal Process 22(6):1441–1464. https://doi.org/10.1016/j.ymssp.2007.11.029 CrossRef

37.

Al-Jumaili SK, Holford KM, Eaton MJ, Pullin R (2015) Parameter correction technique (PCT): a novel method for acoustic emission characterisation in large-scale composites. Compos Part B Eng 75:336–344. https://doi.org/10.1016/j.compositesb.2015.01.044 CrossRef

38.

Crivelli D, Guagliano M, Eaton M, Pearson M, Al-Jumaili S, Holford K, Pullin R (2015) Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission. Compos Part B Eng 74:1–12. https://doi.org/10.1016/j.compositesb.2014.12.032 CrossRef

39.

Kinra VK, Ganpatye AS, Maslov K (2006) Ultrasonic ply-by-ply detection of matrix cracks in laminated composites. J Nondestruct Eval 25(1):37–49CrossRef

40.

Harizi W, Chaki S, Bourse G, Ourak M (2015) Mechanical damage characterization of glass fiber-reinforced polymer laminates by ultrasonic maps. Compos Part B Eng 70:131–137CrossRef

41.

Lawrence CW, Briggs GAD, Scruby CB, Davies JRR (1993) Acoustic microscopy of ceramic-fibre composites. J Mater Sci 28(13):3635–3644. https://doi.org/10.1007/bf01159847 CrossRef

42.

Kimpara I, Takehana M, Suzuki T (1978) Analysis of thickness-direction ultrasonic wave propagation of fiberglass reinforced plastics laminates. In: ICCM/2; proceedings of the second international conference on composite materials, Toronto, Canada, April 16–20, pp 1104–1122

43.

Borum KK (2006) Evaluation of the quality of thick fibre composites using immersion and air-coupled ultrasonic techniques. In: Proceedings of European conference on non-destructive testing, Berlin, 25–29/09 2006

44.

Hawkins G, Sheaffer P, Johnson E (1991) NDE of thick composites in the aerospace industry—an overview. In: Thompson DO, Chimenti DE (eds) Review of progress in quantitative nondestructive evaluation. Springer, pp 1591–1597

45.

Frankle RS, Rose DN (1995) Flexible ultrasonic array system for inspecting thick composite structures. In: Proceedings of nondestructive evaluation of aging infrastructure, Oakland, USA, International Society for Optics and Photonics, pp 51–59

46.

Li C, Pain D, Wilcox PD, Drinkwater BW (2013) Imaging composite material using ultrasonic arrays. NDT and E Int 53:8–17CrossRef

47.

Hsu DK, Barnard DJ (2006) Inspecting composites with airborne ultrasound: through thick and thin. In: Proceedings of quantitative nondestructive evaluation, vol 1. AIP Publishing, pp 991–998

48.

Revel GM, Pandarese G, Cavuto A (2013) Advanced ultrasonic non-destructive testing for damage detection on thick and curved composite elements for constructions. J Sandw Struct Mater 15(1):5–24CrossRef

49.

Toyama N, Yashiro S, Takatsubo J, Okabe T (2005) Stiffness evaluation and damage identification in composite beam under tension using Lamb waves. Acta Mater 53(16):4389–4397. https://doi.org/10.1016/j.actamat.2005.05.043 CrossRef

50.

Ramadas C, Padiyar J, Balasubramaniam K, Joshi M, Krishnamurthy C (2011) Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint. NDT and E Int 44(6):523–530CrossRef

51.

Ramadas C, Hood A, Khan I, Balasubramaniam K, Joshi M (2013) Transmission and reflection of the fundamental Lamb modes in a metallic plate with a semi-infinite horizontal crack. Ultrasonics 53(3):773–781. https://doi.org/10.1016/j.ultras.2012.11.004 CrossRef

52.

Rheinfurth M, Schmidt F, Döring D, Solodov I, Busse G, Horst P (2011) Air-coupled guided waves combined with thermography for monitoring fatigue in biaxially loaded composite tubes. Compos Sci Technol 71(5):600–608. https://doi.org/10.1016/j.compscitech.2010.12.012 CrossRef

53.

Nagy PB (1998) Fatigue damage assessment by nonlinear ultrasonic materials characterization. Ultrasonics 36(1–5):375–381. https://doi.org/10.1016/S0041-624X(97)00040-1 CrossRef

54.

Koen E, Den Van, Abeele A (1996) Elastic pulsed wave propagation in media with second-or higher-order nonlinearity. Part I. Theoretical framework. J Acoust Soc Am 99(6):3334–3345CrossRef

55.

Van Den Abeele KE, Sutin A, Carmeliet J, Johnson PA (2001) Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS). NDT and E Int 34(4):239–248CrossRef

56.

Solodov IY, Krohn N, Busse G (2002) CAN: an example of nonclassical acoustic nonlinearity in solids. Ultrasonics 40(1):621–625CrossRef

57.

Donskoy D, Sutin A, Ekimov A (2001) Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing. NDT and E Int 34(4):231–238CrossRef

58.

Van Den Abeele K-A, Johnson PA, Sutin A (2000) Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, part I: nonlinear wave modulation spectroscopy (NWMS). Res Nondestr Eval 12(1):17–30CrossRef

59.

Klepka A, Staszewski W, Jenal R, Szwedo M, Iwaniec J, Uhl T (2012) Nonlinear acoustics for fatigue crack detection–experimental investigations of vibro-acoustic wave modulations. Struct Health Monit 11(2):197–211CrossRef

60.

Klepka A, Pieczonka L, Staszewski W, Aymerich F (2014) Impact damage detection in laminated composites by non-linear vibro-acoustic wave modulations. Compos Part B Eng 65:99–108CrossRef

61.

Aymerich F, Staszewski W (2010) Experimental study of impact-damage detection in composite laminates using a cross-modulation vibro-acoustic technique. Struct Health Monit 9(6):541–553CrossRef

62.

Zaitsev VY, Gusev V, Castagnede B (2002) Observation of the “Luxemburg–Gorky effect” for elastic waves. Ultrasonics 40(1):627–631CrossRef

63.

Korshak B, Solodov IY, Ballad E (2002) DC effects, sub-harmonics, stochasticity and “memory” for contact acoustic non-linearity. Ultrasonics 40(1):707–713CrossRef

64.

Ulrich T, Sutin A, Guyer R, Johnson P (2008) Time reversal and non-linear elastic wave spectroscopy (TR NEWS) techniques. Int J Non-Linear Mech 43(3):209–216CrossRef

65.

Goursolle T, Dos Santos S, Matar OB, Calle S (2008) Non-linear based time reversal acoustic applied to crack detection: Simulations and experiments. Int J Non-Linear Mech 43(3):170–177CrossRef

66.

Meo M, Zumpano G (2005) Nonlinear elastic wave spectroscopy identification of impact damage on a sandwich plate. Compos Struct 71(3):469–474CrossRef

67.

Solodov I, Bai J, Bekgulyan S, Busse G (2011) A local defect resonance to enhance acoustic wave-defect interaction in ultrasonic nondestructive evaluation. Appl Phys Lett 99(21):211–213CrossRef

68.

Solodov I (2014) Resonant acoustic nonlinearity of defects for highly-efficient nonlinear NDE. J Nondestr Eval 33(2):252–262CrossRef

69.

Delrue S, Tabatabaeipour M, Hettler J, Van Den Abeele K (2015) Non-destructive evaluation of kissing bonds using local defect resonance (LDR) spectroscopy: a simulation study. Phys Procedia 70(Supplement C):648–651. https://doi.org/10.1016/j.phpro.2015.08.067 CrossRef

70.

Post W, Kersemans M, Solodov I, Van Den Abeele K, García SJ, van der Zwaag S (2017) Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer. Compos Part A Appl Sci Manuf 101(Supplement C):243–253. https://doi.org/10.1016/j.compositesa.2017.06.018 CrossRef

71.

Meo M, Polimeno U, Zumpano G (2008) Detecting damage in composite material using nonlinear elastic wave spectroscopy methods. Appl Compos Mater 15(3):115–126CrossRef

72.

Aymerich F, Staszewski W (2010) Impact damage detection in composite laminates using nonlinear acoustics. Compos Part A Appl Sci Manuf 41(9):1084–1092CrossRef

73.

Benaarbia A, Chrysochoos A, Robert G (2014) Kinetics of stored and dissipated energies associated with cyclic loadings of dry polyamide 6.6 specimens. Polym Test 34:155–167. https://doi.org/10.1016/j.polymertesting.2014.01.009 CrossRef

74.

Mahal M, Blanksvärd T, Täljsten B, Sas G (2015) Using digital image correlation to evaluate fatigue behavior of strengthened reinforced concrete beams. Eng Struct 105:277–288. https://doi.org/10.1016/j.engstruct.2015.10.017 CrossRef

75.

Tableau N, Aboura Z, Khellil K, Marcin L, Bouillon F (2017) Accurate measurement of in-plane and out-of-plane shear moduli on 3D woven SiC-SiBC material. Compos Struct 172(Supplement C):319–329. https://doi.org/10.1016/j.compstruct.2016.12.035 CrossRef

76.

Franz T (2001) Photoelastic study of the mechanic behaviour of orthotropic composite plates subjected to impact. Compos Struct 54(2–3):169–178. https://doi.org/10.1016/S0263-8223(01)00086-1 CrossRef

77.

Chen B, Basaran C (2012) Far-field modeling of Moiré interferometry using scalar diffraction theory. Opt Lasers Eng 50(8):1168–1176. https://doi.org/10.1016/j.optlaseng.2011.08.007 CrossRef

78.

Lammering R (2010) Observation of piezoelectrically induced Lamb wave propagation in thin plates by use of speckle interferometry. Exp Mech 50(3):377–387CrossRef

79.

Ayadi A, Nouri H, Guessasma S, Roger F (2016) Large-scale X-Ray microtomography analysis of fiber orientation in weld line of short glass fiber reinforced thermoplastic and related elasticity behavior. Macromol Mater Eng 301(8):907–921CrossRef

80.

Aparna ML, Chaitanya G, Srinivas K, Rao JA (2015) Fatigue testing of continuous GFRP composites using digital image correlation (DIC) technique: a review. Mater Today Proc 2(4–5):3125–3131. https://doi.org/10.1016/j.matpr.2015.07.275 CrossRef

81.

Comer AJ, Katnam KB, Stanley WF, Young TM (2013) Characterising the behaviour of composite single lap bonded joints using digital image correlation. Int J Adhes Adhes 40:215–223. https://doi.org/10.1016/j.ijadhadh.2012.08.010 CrossRef

82.

Brynk T, Molak RM, Janiszewska M, Pakiela Z (2012) Digital image correlation measurements as a tool of composites deformation description. Comput Mater Sci 64:157–161. https://doi.org/10.1016/j.commatsci.2012.04.034 CrossRef

83.

Crupi V, Guglielmino E, Risitano G, Tavilla F (2015) Experimental analyses of SFRP material under static and fatigue loading by means of thermographic and DIC techniques. Compos Part B Eng 77:268–277. https://doi.org/10.1016/j.compositesb.2015.03.052 CrossRef

84.

Giancane S, Panella FW, Nobile R, Dattoma V (2010) Fatigue damage evolution of fiber reinforced composites with digital image correlation analysis. Procedia Eng 2(1):1307–1315. https://doi.org/10.1016/j.proeng.2010.03.142 CrossRef

85.

Montesano J, Selezneva M, Levesque M, Fawaz Z (2015) Modeling fatigue damage evolution in polymer matrix composite structures and validation using in situ digital image correlation. Compos Struct 125:354–361. https://doi.org/10.1016/j.compstruct.2015.02.035 CrossRef

86.

Rolland H, Saintier N, Wilson P, Merzeau J, Robert G (2017) In situ X-ray tomography investigation on damage mechanisms in short glass fibre reinforced thermoplastics: effects of fibre orientation and relative humidity. Compos Part B Eng 109:170–186. https://doi.org/10.1016/j.compositesb.2016.10.043 CrossRef

87.

Prakash R (1980) Non-destructive testing of composites. Composites 11(4):217–224. https://doi.org/10.1016/0010-4361(80)90428-0 CrossRef

88.

Guild F, Vrellos N, Drinkwater B, Balhi N, Ogin S, Smith P (2006) Intra-laminar cracking in CFRP laminates: observations and modelling. J Mater Sci 41(20):6599–6609. https://doi.org/10.1007/s10853-006-0199-0 CrossRef

89.

Ataş A, Soutis C (2013) Subcritical damage mechanisms of bolted joints in CFRP composite laminates. Compos Part B Eng 54:20–27CrossRef

90.

Scott AE, Mavrogordato M, Wright P, Sinclair I, Spearing SM (2011) In situ fibre fracture measurement in carbon–epoxy laminates using high resolution computed tomography. Compos Sci Technol 71(12):1471–1477. https://doi.org/10.1016/j.compscitech.2011.06.004 CrossRef

91.

Garcea SC, Sinclair I, Spearing SM (2015) In situ synchrotron tomographic evaluation of the effect of toughening strategies on fatigue micromechanisms in carbon fibre reinforced polymers. Compos Sci Technol 109(Supplement C):32–39. https://doi.org/10.1016/j.compscitech.2015.01.012 CrossRef

92.

Garcea SC, Mavrogordato MN, Scott AE, Sinclair I, Spearing SM (2014) Fatigue micromechanism characterisation in carbon fibre reinforced polymers using synchrotron radiation computed tomography. Compos Sci Technol 99:23–30. https://doi.org/10.1016/j.compscitech.2014.05.006 CrossRef

93.

Patterson BM, Escobedo-Diaz JP, Dennis-Koller D, Cerreta E (2012) Dimensional quantification of embedded voids or objects in three dimensions using X-ray tomography. Microsc Microanal 18(02):390–398CrossRef

94.

Sket F, Enfedaque A, Alton C, González C, Molina-Aldareguia JM, Llorca J (2014) Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. Compos Sci Technol 90(Supplement C):129–138. https://doi.org/10.1016/j.compscitech.2013.10.022 CrossRef

95.

Cosmi F, Bernasconi A (2013) Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers. Compos Sci Technol 79:70–76CrossRef

96.

Cosmi F, Ravalico C (2015) Threshold identification for micro-tomographic damage characterisation in a short-fibre-reinforced polymer. Strain 51(3):171–179CrossRef

97.

Yu B, Bradley R, Soutis C, Withers P (2016) A comparison of different approaches for imaging cracks in composites by X-ray microtomography. Philos Trans R Soc A 374(2071):37–52CrossRef

98.

Meola C, Carlomagno GM (2014) Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects. Int J Impact Eng 67:1–11CrossRef

99.

Colombo C, Vergani L, Burman M (2012) Static and fatigue characterisation of new basalt fibre reinforced composites. Compos Struct 94(3):1165–1174CrossRef

100.

La Rosa G, Risitano A (2000) Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int J Fatigue 22(1):65–73. https://doi.org/10.1016/S0142-1123(99)00088-2 CrossRef

101.

Montesano J, Fawaz Z, Bougherara H (2013) Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite. Compos Struct 97:76–83. https://doi.org/10.1016/j.compstruct.2012.09.046 CrossRef

102.

Jegou L, Marco Y, Le Saux V, Calloch S (2013) Fast prediction of the Wöhler curve from heat build-up measurements on short fiber reinforced plastic. Int J Fatigue 47:259–267. https://doi.org/10.1016/j.ijfatigue.2012.09.007 CrossRef

103.

Harizi W, Chaki S, Bourse G, Ourak M (2014) Mechanical damage assessment of glass fiber-reinforced polymer composites using passive infrared thermography. Compos Part B Eng 59:74–79CrossRef

104.

Cawley P (2006) Inspection of composites–current status and challenges. In: Proceedings of the European conference of nondestructive testing, London, UK

105.

Chen D, Wu N, Zhang Z (2012) Defect recognition in thermosonic imaging. Chin J Aeronaut 25(4):657–662. https://doi.org/10.1016/S1000-9361(11)60431-7 CrossRef

106.

Zacharia SG, Siddiqui A, Lahiri J (2012) In situ thermal diffusivity determination of anisotropic composite structures: transverse diffusivity measurement. NDT and E Int 48:1–9CrossRef

107.

Rajic N (2002) Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures. Compos Struct 58(4):521–528CrossRef

108.

Vavilov V (2006) Determining limits of thermal NDT of thick graphite/epoxy composites. In: 9th European conference on nondestructive testing, Berlin, Germany, pp 25–29

109.

Toubal L, Karama M, Lorrain B (2006) Damage evolution and infrared thermography in woven composite laminates under fatigue loading. Int J Fatigue 28(12):1867–1872CrossRef

110.

Harizi W, Chaki S, Bourse G, Ourak M (2014) Mechanical damage assessment of polymer–matrix composites using active infrared thermography. Compos Part B Eng 66:204–209. https://doi.org/10.1016/j.compositesb.2014.05.017 CrossRef

111.

Li Y, Z-w Yang, J-t Zhu, A-b Ming, Zhang W, J-y Zhang (2016) Investigation on the damage evolution in the impacted composite material based on active infrared thermography. NDT and E Int 83:114–122. https://doi.org/10.1016/j.ndteint.2016.06.008 CrossRef

112.

Meola C, Carlomagno GM, Squillace A, Vitiello A (2006) Non-destructive evaluation of aerospace materials with lock-in thermography. Eng Fail Anal 13(3):380–388CrossRef

113.

Junyan L, Yang L, Fei W, Yang W (2015) Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials. Infrared Phys Technol 71:448–456. https://doi.org/10.1016/j.infrared.2015.06.007 CrossRef

114.

Jinlong G, Junyan L, Fei W, Yang W (2015) Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography. Infrared Phys Technol 71:439–447. https://doi.org/10.1016/j.infrared.2015.06.005 CrossRef

115.

Meola C, Di Maio R, Roberti N, Carlomagno GM (2005) Application of infrared thermography and geophysical methods for defect detection in architectural structures. Eng Fail Anal 12(6):875–892CrossRef

116.

Cinzia T, Carosena M, Maria CG (2013) Porosity distribution in composite structures with infrared thermography. J Compos 2013:41–50

117.

Fruehmann RK, Dulieu-Barton JM, Quinn S (2010) Assessment of fatigue damage evolution in woven composite materials using infra-red techniques. Compos Sci Technol 70(6):937–946. https://doi.org/10.1016/j.compscitech.2010.02.009 CrossRef

118.

Chrysafi AP, Athanasopoulos N, Siakavellas NJ (2017) Damage detection on composite materials with active thermography and digital image processing. Int J Therm Sci 116(Supplement C):242–253. https://doi.org/10.1016/j.ijthermalsci.2017.02.017 CrossRef

119.

Hung YY, Ho HP (2005) Shearography: an optical measurement technique and applications. Mater Sci Eng R Rep 49(3):61–87. https://doi.org/10.1016/j.mser.2005.04.001 CrossRef

120.

Murri W, Sermon B, Andersen R, Martinez L, Van der Heiden E, Garner C (1991) Defects in thick composites and some methods to locate them. In: Review of progress in quantitative nondestructive evaluation. Springer, pp 1583–1590

121.

De Angelis G, Meo M, Almond DP, Pickering SG, Angioni SL (2012) A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization. NDT and E Int 45(1):91–96. https://doi.org/10.1016/j.ndteint.2011.07.007 CrossRef

122.

Hung YY, Chen YS, Ng SP, Liu L, Huang YH, Luk BL, Ip RWL, Wu CML, Chung PS (2009) Review and comparison of shearography and active thermography for nondestructive evaluation. Mater Sci Eng R Rep 64(5–6):73–112. https://doi.org/10.1016/j.mser.2008.11.001 CrossRef

123.

Taillade F, Quiertant M, Benzarti K, Aubagnac C (2011) Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures. Constr Build Mater 25(2):568–574. https://doi.org/10.1016/j.conbuildmat.2010.02.019 CrossRef

124.

Lee J-R, Molimard J, Vautrin A, Surrel Y (2004) Application of grating shearography and speckle shearography to mechanical analysis of composite material. Compos Part A Appl Sci Manuf 35(7–8):965–976. https://doi.org/10.1016/j.compositesa.2004.01.023 CrossRef

125.

Hung YY, Luo WD, Lin L, Shang HM (2000) Evaluating the soundness of bonding using shearography. Compos Struct 50(4):353–362. https://doi.org/10.1016/S0263-8223(00)00109-4 CrossRef

126.

Dunkers JP, Parnas RS, Zimba CG, Peterson RC, Flynn KM, Fujimoto JG, Bouma BE (1999) Optical coherence tomography of glass reinforced polymer composites. Compos Part A Appl Sci Manuf 30(2):139–145. https://doi.org/10.1016/S1359-835X(98)00084-0 CrossRef

127.

Nyongesa HO, Otieno AW, Rosin PL (2001) Neural fuzzy analysis of delaminated composites from shearography imaging. Compos Struct 54(2–3):313–318. https://doi.org/10.1016/S0263-8223(01)00103-9 CrossRef

128.

Lopes H, Ferreira F, Araújo dos Santos JV, Moreno-García P (2014) Localization of damage with speckle shearography and higher order spatial derivatives. Mech Syst Signal Process 49(1):24–38. https://doi.org/10.1016/j.ymssp.2013.12.016 CrossRef

129.

Hung YY, Yang LX, Huang YH (2013) 5—non-destructive evaluation (NDE) of composites: digital shearography A2—Karbhari, Vistasp M. In: Non-destructive evaluation (NDE) of polymer matrix composites. Woodhead Publishing, pp 84–115. doi: https://doi.org/10.1533/9780857093554.1.84

130.

Sklarczyk C (2016) Microwave, millimeter wave and terahertz (MMT) techniques for materials characterization. In: Huebschen G, Altpeter I, Tschuncky R, Herrmann H.-G. (eds) Materials characterization using nondestructive evaluation (NDE) methods. Woodhead Publishing, p 125

131.

Anastasi RF Investigation of fiber waviness in a thick glass composite beam using THz NDE. In: 15th international symposium on: smart structures and materials and nondestructive evaluation and health monitoring, 2008. International Society for Optics and Photonics

132.

Ryu C-H, Park S-H, Kim D-H, Jhang K-Y, Kim H-S (2015) Nondestructive evaluation of hidden multi-delamination in a glass-fiber-reinforced plastic composite using terahertz spectroscopy. Compos Struct 156:338–347. https://doi.org/10.1016/j.compstruct.2015.09.055 CrossRef

133.

Redo-Sanchez A, Karpowicz N, Xu J, Zhang X (2006) Damage and defect inspection with terahertz waves. In: 4th international workshop on ultrasonic and advanced methods for nondestructive testing and material characterization, Dartmouth, USA, pp 67–78

134.

Naito K, Kagawa Y, Utsuno S, Naganuma T, Kurihara K (2009) Dielectric properties of eight-harness-stain fabric glass fiber reinforced polyimide matrix composite in the THz frequency range. NDT and E Int 42(5):441–445. https://doi.org/10.1016/j.ndteint.2009.02.001 CrossRef

135.

Bohn MJ, Petkie DT (2013) 18—terahertz applications in the aerospace industry A2—Saeedkia, Daryoosh. In: Saeedkia D (ed) Handbook of terahertz technology for imaging, sensing and communications. Woodhead Publishing, pp 510–546. doi:https://doi.org/10.1533/9780857096494.3.510

136.

Stoik C, Bohn M, Blackshire J (2010) Nondestructive evaluation of aircraft composites using reflective terahertz time domain spectroscopy. NDT and E Int 43(2):106–115. https://doi.org/10.1016/j.ndteint.2009.09.005 CrossRef

137.

Hsu DK, Lee K-S, Park J-W, Woo Y-D, Im K-H (2012) NDE inspection of terahertz waves in wind turbine composites. Int J Precis Eng Manuf 13(7):1183–1189. https://doi.org/10.1007/s12541-012-0157-5 CrossRef

138.

Todoroki A, Tanaka M, Shimamura Y (2002) Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method. Compos Sci Technol 62(5):619–628. https://doi.org/10.1016/S0266-3538(02)00019-2 CrossRef

139.

Hayes SA, Lafferty AD, Altinkurt G, Wilson PR, Collinson M, Duchene P (2015) Direct electrical cure of carbon fiber composites. Adv Manuf Polym Compos Sci 1(2):112–119

140.

Gigliotti M, Lafarie-Frenot MC, Lin Y, Pugliese A (2015) Electro-mechanical fatigue of CFRP laminates for aircraft applications. Compos Struct 127:436–449. https://doi.org/10.1016/j.compstruct.2015.01.023 CrossRef

141.

Angelidis N, Wei CY, Irving PE (2004) The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain. Compos Part A Appl Sci Manuf 35(10):1135–1147. https://doi.org/10.1016/j.compositesa.2004.03.020 CrossRef

142.

Kupke M, Schulte K, Schüler R (2001) Non-destructive testing of FRP by d.c. and a.c. electrical methods. Compos Sci Technol 61(6):837–847. https://doi.org/10.1016/S0266-3538(00)00180-9 CrossRef

143.

Wang S, Chung D (2000) Piezoresistivity in continuous carbon fiber polymer-matrix composite. Polym Compos 21(1):13–19CrossRef

144.

Wen J, Xia Z, Choy F (2011) Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement. Compos Part B Eng 42(1):77–86. https://doi.org/10.1016/j.compositesb.2010.08.005 CrossRef

145.

Wang S, Wang D, Chung D, Chung JH (2006) Method of sensing impact damage in carbon fiber polymer-matrix composite by electrical resistance measurement. J Mater Sci 41(8):2281–2289. https://doi.org/10.1007/s10853-006-7172-9 CrossRef

146.

Todoroki A (2001) The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance. Compos Sci Technol 61(13):1871–1880. https://doi.org/10.1016/S0266-3538(01)00088-4 CrossRef

147.

Todoroki A, Tanaka Y, Shimamura Y (2004) Multi-prove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces. Compos Sci Technol 64(5):749–758CrossRef

148.

Todoroki A, Tanaka Y, Shimamura Y (2002) Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method. Compos Sci Technol 62(9):1151–1160. https://doi.org/10.1016/S0266-3538(02)00053-2 CrossRef

149.

Todoroki A, Tanaka Y (2002) Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method. Compos Sci Technol 62(5):629–639. https://doi.org/10.1016/S0266-3538(02)00013-1 CrossRef

150.

Suzuki Y, Todoroki A, Matsuzaki R, Mizutani Y (2012) Impact-damage visualization in CFRP by resistive heating: development of a new detection method for indentations caused by impact loads. Compos Part A Appl Sci Manuf 43(1):53–64. https://doi.org/10.1016/j.compositesa.2011.09.003 CrossRef

151.

Todoroki A, Omagari K, Shimamura Y, Kobayashi H (2006) Matrix crack detection of CFRP using electrical resistance change with integrated surface probes. Compos Sci Technol 66(11–12):1539–1545. https://doi.org/10.1016/j.compscitech.2005.11.029 CrossRef

152.

Todoroki A, Yoshida J (2004) Electrical resistance change of unidirectional CFRP due to applied load. JSME Int J, Ser A 47(3):357–364CrossRef

153.

Schueler R, Joshi SP, Schulte K (2001) Damage detection in CFRP by electrical conductivity mapping. Compos Sci Technol 61(6):921–930. https://doi.org/10.1016/S0266-3538(00)00178-0 CrossRef

154.

Abry JC, Choi YK, Chateauminois A, Dalloz B, Giraud G, Salvia M (2001) In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements. Compos Sci Technol 61(6):855–864. https://doi.org/10.1016/S0266-3538(00)00181-0 CrossRef

155.

Schulte K, Baron C (1989) Load and failure analyses of CFRP laminates by means of electrical resistivity measurements. Compos Sci Technol 36(1):63–76. https://doi.org/10.1016/0266-3538(89)90016-X CrossRef

156.

Vavouliotis A, Paipetis A, Kostopoulos V (2011) On the fatigue life prediction of CFRP laminates using the electrical resistance change method. Compos Sci Technol 71(5):630–642. https://doi.org/10.1016/j.compscitech.2011.01.003 CrossRef

157.

Connor MT, Roy S, Ezquerra TA, Calleja FJB (1998) Broadband AC conductivity of conductor-polymer composites. Phys Rev B 57(4):2286–2295CrossRef

158.

Kalamkarov AL, MacDonald DO, Fitzgerald SB, Georgiades AV (2000) Reliability assessment of pultruded FRP reinforcements with embedded fiber optic sensors. Compos Struct 50(1):69–78. https://doi.org/10.1016/S0263-8223(00)00081-7 CrossRef

159.

K-t Lau, Yuan L, Zhou L-m WuJ, C-h Woo (2001) Strain monitoring in FRP laminates and concrete beams using FBG sensors. Compos Struct 51(1):9–20. https://doi.org/10.1016/S0263-8223(00)00094-5 CrossRef

160.

McKenzie I, Jones R, Marshall IH, Galea S (2000) Optical fibre sensors for health monitoring of bonded repair systems. Compos Struct 50(4):405–416. https://doi.org/10.1016/S0263-8223(00)00107-0 CrossRef

161.

Barton EN, Ogin SL, Thorne AM, Reed GT, Le Page BH (2001) Interaction between optical fibre sensors and matrix cracks in cross-ply GRP laminates Part 1: passive optical fibres. Compos Sci Technol 61(13):1863–1869. https://doi.org/10.1016/S0266-3538(01)00086-0 CrossRef

162.

Gu X, Chen Z, Ansari F (1999) Method and theory for a multi-gauge distributed fiber optic crack sensor. J Intell Mater Syst Struct 10(4):266–273CrossRef

163.

Zhao Y, Ansari F (2002) Embedded fiber optic sensor for characterization of interface strains in FRP composite. Sens Actuators A Phys 100(2):247–251CrossRef

164.

Moulin E, Assaad J, Delebarre C, Kaczmarek H, Balageas D (1997) Piezoelectric transducer embedded in a composite plate: application to Lamb wave generation. J Appl Phys 82(5):2049–2055CrossRef

165.

Kunadt A, Pfeifer G, Fischer W-J (2013) Ultrasound flow sensor based on arrays of piezoelectric transducers integrated in a composite. Procedia Mater Sci 2:160–165. https://doi.org/10.1016/j.mspro.2013.02.019 CrossRef

166.

Tamiatto C, Krawczak P, Pabiot J, Laurent F (1998) Integrated sensors for in-service health monitoring of glass/resin composites. J Adv Mater 30(3):32–37

167.

Tamiatto C, Krawczak P, Pabiot J, Laurent F (2000) Smart composites applied to continuous in-service damage monitoring of glass/polymer industrial parts. SME Technical Paper:IQ 00-244

168.

Cheng J, Ji H, Qiu J, Takagi T, Uchimoto T, Hu N (2014) Role of interlaminar interface on bulk conductivity and electrical anisotropy of CFRP laminates measured by eddy current method. NDT and E Int 68:1–12. https://doi.org/10.1016/j.ndteint.2014.07.001 CrossRef

169.

Gros X, Ogi K, Takahashi K (1998) Eddy current, ultrasonic C-scan and scanning acoustic microscopy testing of delaminated quasi-isotropic CFRP materials: a case study. J Reinf Plast Compos 17(5):389–405CrossRef

170.

Mizukami K, Mizutani Y, Kimura K, Sato A, Todoroki A, Suzuki Y, Nakamura Y (2016) Visualization and size estimation of fiber waviness in multidirectional CFRP laminates using eddy current imaging. Compos Part A Appl Sci Manuf 90:261–270. https://doi.org/10.1016/j.compositesa.2016.07.008 CrossRef

171.

Bardl G, Nocke A, Cherif C, Pooch M, Schulze M, Heuer H, Schiller M, Kupke R, Klein M (2016) Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data. Compos Part B Eng 96:312–324. https://doi.org/10.1016/j.compositesb.2016.04.040 CrossRef

172.

Bouloudenine A, Feliachi M, Latreche MEH (2017) Development of circular arrayed eddy current sensor for detecting fibers orientation and in-plane fiber waviness in unidirectional CFRP. NDT and E Int 92(Supplement C):30–37. https://doi.org/10.1016/j.ndteint.2017.07.011 CrossRef

173.

Berger D, Egloff A, Summa J, Schwarz M, Lanza G, Herrmann H-G (2017) Conception of an eddy current in-process quality control for the production of carbon fibre reinforced components in the rtm process chain. Procedia CIRP 62:39–44. https://doi.org/10.1016/j.procir.2016.06.011 CrossRef

174.

De Goeje MP, Wapenaar KED (1992) Non-destructive inspection of carbon fibre-reinforced plastics using eddy current methods. Composites 23(3):147–157. https://doi.org/10.1016/0010-4361(92)90435-W CrossRef

175.

Mizukami K, Mizutani Y, Todoroki A, Suzuki Y (2015) Design of eddy current-based dielectric constant meter for defect detection in glass fiber reinforced plastics. NDT and E Int 74:24–32. https://doi.org/10.1016/j.ndteint.2015.04.005 CrossRef

176.

Mizukami K, Mizutani Y, Todoroki A, Suzuki Y (2015) Detection of delamination in thermoplastic CFRP welded zones using induction heating assisted eddy current testing. NDT and E Int 74:106–111. https://doi.org/10.1016/j.ndteint.2015.05.009 CrossRef

177.

Nováková L, Boháčová M, Homola P (2015) Application of material analysis and eddy current conductivity tests to aircraft accident investigation. Eng Fail Anal 56:422–428. https://doi.org/10.1016/j.engfailanal.2014.12.011 CrossRef

178.

Peng J, Tian GY, Wang L, Zhang Y, Li K, Gao X (2015) Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization. NDT and E Int 74:72–80. https://doi.org/10.1016/j.ndteint.2015.05.006 CrossRef

179.

He Y, Tian G, Pan M, Chen D (2014) Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography. Compos Struct 109:1–7. https://doi.org/10.1016/j.compstruct.2013.10.049 CrossRef

180.

Gros X, Bousigue J, Takahashi K (1999) NDT data fusion at pixel level. NDT and E Int 32(5):283–292CrossRef

181.

Mayr G, Plank B, Sekelja J, Hendorfer G (2011) Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers. NDT and E Int 44(7):537–543CrossRef

182.

Munoz V, Valès B, Perrin M, Pastor ML, Welemane H, Cantarel A, Karama M (2016) Damage detection in CFRP by coupling acoustic emission and infrared thermography. Compos Part B Eng 85:68–75. https://doi.org/10.1016/j.compositesb.2015.09.011 CrossRef

183.

Chaki S, Harizi W, Bourse G, Ourak M (2015) Multi-technique approach for non destructive diagnostic of structural composite materials using bulk ultrasonic waves, guided waves, acoustic emission and infrared thermography. Compos Part A Appl Sci Manuf 78:358–361. https://doi.org/10.1016/j.compositesa.2015.08.033 CrossRef

184.

Chaki S, Harizi W, Krawczak P, Bourse G, Ourak M (2016) Structural health of polymer composite: non destructive diagnosis using a hybrid NDT approach. JEC Compos Mag 107:25–28

185.

Cuadra J, Vanniamparambil PA, Hazeli K, Bartoli I, Kontsos A (2013) Damage quantification in polymer composites using a hybrid NDT approach. Compos Sci Technol 83:11–21CrossRef

186.

Harizi W (2012) Caractérisation de l’endommagement des composites à matrice polymère par une approche multi-technique non destructive. Mines Douai and Univ, Valenciennes

187.

Dattoma V, Giancane S (2013) Evaluation of energy of fatigue damage into GFRC through digital image correlation and thermography. Compos Part B Eng 47:283–289. https://doi.org/10.1016/j.compositesb.2012.10.030 CrossRef

188.

Goidescu C, Welemane H, Garnier C, Fazzini M, Brault R, Péronnet E, Mistou S (2013) Damage investigation in CFRP composites using full-field measurement techniques: Combination of digital image stereo-correlation, infrared thermography and X-ray tomography. Compos Part B Eng 48:95–105. https://doi.org/10.1016/j.compositesb.2012.11.016 CrossRef

Titel: A review of non-destructive techniques used for mechanical damage assessment in polymer composites
Publikationsdatum: 24.01.2018
Erschienen in: Journal of Materials Science / Ausgabe 11/2018
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-018-2045-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2018

Effect of flake powder metallurgy on thermal conductivity of graphite flakes reinforced aluminum matrix composites

Soy protein-treated nanofillers creating adaptive interfaces in nanocomposites with effectively improved conductivity

Controllable synthesis of MoS2 nanostructures from monolayer flakes, few-layer pyramids to multilayer blocks by catalyst-assisted thermal evaporation

Strength of ceramic–metal joints measured in planar impact experiments

Flower-like silver nanocrystals: facile synthesis via a gas–solution interface technique

A semitopological mean-field model of discontinuous dynamic recrystallization

Premium Partner

Marktübersichten