Skip to main content

Advertisement

SpringerLink
Log in

Bond-coating in plasma-sprayed calcium-phosphate coatings

  • Published:
Journal of Materials Science: Materials in Medicine Aims and scope Submit manuscript

An Erratum to this article was published on 01 January 2007

Abstract

The influence of bond–coating on the mechanical properties of plasma-spray coatings of hydroxyatite on Ti was investigated. Plasma-spray powder was produced from human teeth enamel and dentine. Before processing the main apatite coating, a very thin layer of Al2O3/TiO2 was applied on super clean and roughened, by Al2O3 blasting, Ti surface as bond-coating. The experimental results showed that bond-coating caused significant increase of the mechanical properties of the coating layer: In the case of the enamel powder from 6.66 MPa of the simple coating to 9.71 MPa for the bond-coating and in the case of the dentine powder from 6.27 MPa to 7.84 MPa, respectively. Both tooth derived powders feature high thermal stability likely due to their relatively high content of fluorine. Therefore, F-rich apatites, such those investigated in this study, emerge themselves as superior candidate materials for calcium phosphate coatings of producing medical devices. The methods of apatite powder production and shaping optimization of powder particles are both key factors of a successful coating. The methods used in this study can be adopted as handy, inexpensive and reliable ways to produce high quality of powders for plasma spray purposes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. R. Z. LE GEROS and J. P. LE GEROS, In: An Introduction to Bioceramics (World Scientific, Singapore) (1993) p. 139.

  2. H. DASARATY, C. RILEY, D. COBLE, W. R. LACEFIELD and G. MAYBEE, J. Biomed. Mater. Res. 31 (1996) 81.

    Article  Google Scholar 

  3. F. N. OKTAR, K. KESENCI and E. PISKIN, Artificial Cells, Blood Substitutes and Immobilization Biotechnology 27 (1999) 367.

    Article  CAS  Google Scholar 

  4. G. GGÖLLER and F. N. OKTAR, Mater. Lett. 56 (2002) 142.

    Google Scholar 

  5. F. N. OKTAR and G. GGÖLLER, Ceram. Int. 28 (2002) 617.

    Article  CAS  Google Scholar 

  6. M. OKAZAKI, Y. MIAKE, H. TOHDA, T. YANAGISAWA and J. TAKAHASHI, Biomaterials 20 (1999) 1303.

    Article  CAS  Google Scholar 

  7. M. OKAZAKI, Y. MIAKE, H. TOHDA, T. YANAGISAWA, T. MATSUMATO and J. TAKAHASHI, Biomaterials 20 (1991) 1421.

    Article  Google Scholar 

  8. A. A. CAPUTO and J. STANDLEE, In: Biomechanics in Clinical Dentistry. (Quintessence Pub. Co., Chicago) (1987) p. 102.

  9. F. J. GARCIA-SANZ, M. B. MAYOR, J. L. ARIAS, J. POU, B. LEON and M. PEREZ-AMOR, J. Mater. Sci. Mater. Med. 8 (1997) 861.

    Article  CAS  Google Scholar 

  10. S. OVERGAARD, M. LIND, H. GLERUP, S. GRUNDVIG, C. BBÜNGER and K. SOBALLE, Clinical Orthopaedics and Related Research. 336 (1997) 286.

    Article  Google Scholar 

  11. F. FAZAN and P. M. MARQUIS, J. Mater. Sci. Mater. Med. 11 (2000) 787.

    Article  CAS  Google Scholar 

  12. S. OVERGAARD, M. LIND, K. JOSEPHSEN, A. B. MAUNSBACH, C. BBÜNGER and K. SOBALLE, J. Biomed. Mater. Res. 39 (1998) 141.

    Article  CAS  Google Scholar 

  13. H. ISHIZAWA and M. OGINO, J. Biomed. Mater. Res. 29 (1995) 1071.

    Article  CAS  Google Scholar 

  14. L. GINESTE, M.GINESTE, A. ELLEFTERION, A.GUILHEM, N. ROUQUET and P. FRAYSSINET, J. Biomed. Mater. Res. (Applied Biomaterials) 48 (2000) 224.

    Article  Google Scholar 

  15. P. LEAMY, P. W. BROWN, K. TENHUISEN and C. RANDALL, J. Biomed. Mater. Res. 42 (1998) 458.

    Article  CAS  Google Scholar 

  16. R. B. HEINEMANN, H. KURZWEG, D. G. IVEY and M. L. WAYMAN, J. Biomed. Mater. Res. (Applied Biomaterials) 43 (1998) 441.

    Article  Google Scholar 

  17. E. LUGSCHEIDER, M. KNEPPER, B. HEIMBERG, A. DEKKER and C. J. KIRKPATRICK, J. Mater. Sci. Mater. Med. 5 (1994) 371.

    Article  CAS  Google Scholar 

  18. E. ÇELIK, E AVCI and F YILMAZ, Surface and Coatings Technology 97 (1997) 361.

    Article  Google Scholar 

  19. H. KURZWEG, R. B. HEINEMANN, T. TROCZYNSKI and M. L. WAYMAN, Biomaterials 19 (1998) 1507.

    Article  CAS  Google Scholar 

  20. P. L. SILVA and F. J. MONTEIRO, in Proceedings of the 5th European Conference on Biomaterials Paris, 1985, edited by P. J. Doherety et al. (Elsevier, (1992)) p. 363.

  21. I. TEOREANU and A. IONCEA, Key Eng. Mater. 206– 213 (2002) 1579.

    Article  Google Scholar 

  22. AMDRY 6021: Ceramic hydroxyapatite powder for bio-medical coatings, Sulzer Plasma Technik, Inc., TB6021.001, 09/30/1990.

  23. S. W. K KWEH, K. A. KHOR and P. CHEANG, J. Mater. Proc. Tech. 89– 90 (1999) 373.

  24. ASTM C 633-01: “Standard test method for adhesion or cohesive strength of flame-sprayed coatings”, 2001.

  25. W. A. WITSHIRE, Quintessence Dental Technician 10 (1986) 227.

    Google Scholar 

  26. C. Y. YANG, B. C. WANG, E. CHANG and B. C. WU, J. Mater. Sci. Mater. Med. 6 (1995) 258.

    Article  CAS  Google Scholar 

  27. E. A. MONROE, In: Biomaterials – Teeth (Course notes of the State University of New York, College of Ceramics at Alfred University, NY, June 30, (1987)).

  28. J. H. CHERN LIN, K. S. CHEN and C. P. JU, Mater. Chem. Phys. 41 (1995) 282.

    Article  CAS  Google Scholar 

  29. D. M. LIU, H. M. CHOU and J. D. WU, J. Mater. Sci. Mater. Med. 5 (1994) 147.

    Article  Google Scholar 

  30. L. KELLER, J. Biomed. Mater. Res. 29 (1995) 1403.

    Article  CAS  Google Scholar 

  31. P. CHEANG and K. A. KHOR, Biomaterials 17 (1996) 537.

    Article  CAS  Google Scholar 

  32. M. OGISO, Y. YAMASHITA and T. MATSUMATO, J. Biomed. Mater. Res. 41 (1998) 296.

    Article  CAS  Google Scholar 

  33. J. A. M. CLEMENS, C. P. A. T. KLEIN, R. J. B. SAKKERS, W. J. A. DHERT, K. DE GROOT and P. M. ROZING, J. Biomed. Mater. Res. 36 (1997) 55.

    Article  CAS  Google Scholar 

  34. E. LUGSCHEIDER, M. KNEPPER and K. A. GROSS, in Proceedings of International Thermal Spray Conference & Exhibition, Orlando, 28 May–5 June (1992), (Orlando, (1992)) p. 459.

  35. W. J. A. DHERT, C. P. A. T. KLEIN, J. G. C. WOLKE, E. A. VAN DER VELDE, K. DE GROOT and P. M. ROZING, J. Biomed. Mater. Res. 25 (1991) 1183.

    Article  CAS  Google Scholar 

  36. M. OKAZAKI, M. TAIRA, J. TAKAHASHI, H. TOHDA and T. YANAGISAWA, Biomed. Mater. Eng. 7 (1997) 141.

    CAS  Google Scholar 

  37. J. A. M. CLEMENS, C. P. A. T. KLEIN, R. C. VRIESDE and K. DE GROOT, J. Biomed. Mater. Res. 40 (1998) 341.

    Article  CAS  Google Scholar 

  38. I. M. O. KANGASNIEMI, C. C. P. M. VERHEYEN, E. A. VAN DER VELDE and K. DE GROOT, J. Biomed. Mat. Res. 28 (1994) 563.

    Article  CAS  Google Scholar 

  39. J. G. C. WOLKE, W. J. A. DHERT, C. P. A. T. KLEIN, K. DE GROOT and J. M. A. DE BILECK-HOGERVORST, in Proceedings of International Thermal Spray Conference & Exhibition, Orlando, 28 May–5 June (1992), (Orlando, (1992)) p. 471.

  40. M. S. CUNE, I. P. VAN ROSSEN, C. DE PUTTER and R. P. J. WILS, Clinical Oral Implant Research 7 (1996) 345.

    Article  CAS  Google Scholar 

  41. F. USTEL, In: Plasma Spray Coating Technology. (M. Sc. Thesis, Istanbul Technical University. (1995).

  42. H. S. INGHAM and A. P. SHEPARD, In: Metco Flame Spray Handbook. (Metco Inc., New York, (1965)).

  43. M. DEMIRCI, In: Effects of Some Material Parameters on Bonding Strength of Plasma Spray Coatings (M. Sc. Thesis, Marmara University). (1994).

  44. F. N. OKTAR, In: Characterization of Processed Tooth Hydroxyapatite and Bioglass for Potential Applications in Dentistry. (Ph.D. Thesis, Bogaziçi University) (1999).

  45. G. GGÖLLER, F. N. OKTAR, L. S. ÖZYEGIN, E. S. KAYALI and E. DEMIRKESEN, Mater. Lett. 58 (2004) 2599.

  46. L. S. ÖZYEGIN, F. N. OKTAR, G. GGÖLLER, E. S. KAYALI and T. YAZICI, Mater. Lett. 58 (2004) 2605.

    Article  CAS  Google Scholar 

  47. M. ENTEZARIAN, F. ALLAIRE, P. TSANTRIZOS and R.A.L. DREW, JOM 48 (1996) 53.

  48. K. C. KELLEY, U. S. PATENT 5,722,602 (March 3, (1998)).

  49. K. C. KELLEY, U. S. patent 5,837,048 (November 17, (1998)).

  50. D. L. HOUCK, U. S. patent 4,390,368 (June 28, (1983)).

  51. D. L. HOUCK, U. S. patent 4,395,279 (July 26, (1983)).

  52. R. F. CHENEY, U. S. patent 3,881,911 (June 28, (1983)).

  53. K. A. KHOR and Y. LI, Mater. Lett. 48 (2001) 57.

    Article  CAS  Google Scholar 

  54. F. GITZHOFER, E. BOUYER and M. I. BOULOS, U. S. patent 5,609,921 (March 11, (1997)).

Download references

Author information

Authors and Affiliations

  1. Department of Industrial Engineering, School of Engineering, Marmara University, Goztepe Campus, Ziverbey, 34722, Kadikoy, Istanbul, Turkey

    F. N. Oktar

  2. Department of Radiology, School of Health Professions, Haydarpasa Campus, 34668, Haydarpasa, Uskudar, Istanbul, Turkey

    F. N. Oktar

  3. Department of Ceramics and Glass Engineering, University of Aveiro, 3810-193, Aveiro, Portugal

    F. N. Oktar, S. Agathopoulos & J. M. F. Ferreira

  4. Department of Mechanical Engineering, School of Engineering, Karaelmas University, 67100, Zonguldak, Turkey

    M. Yetmez

  5. Department of Materials Science and Engineering, University of Ioannina, Greece, GR - 451 10, Ioannina, Greece

    S. Agathopoulos

  6. Department of Chemistry, Autonomous Metropolitan University Iztapalapa, Mexico City, Mexico

    T. M. Lopez Goerne

  7. Department of Metallurgical and Materials Engineering, School of Chemical and Metallurgical Engineering, Istanbul Technical University, 80626, Maslak, Istanbul, Turkey

    G. Goller

  8. Department of Chemical Engineering, School of Engineering, Marmara University, Goztepe Campus, Ziverbey, 34722, Kadikoy, Istanbul, Turkey

    I. Ipeker

Authors
  1. F. N. Oktar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. Yetmez
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Agathopoulos
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. T. M. Lopez Goerne
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. G. Goller
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. I. Ipeker
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. J. M. F. Ferreira
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to F. N. Oktar.

Additional information

An erratum to this article is available at http://dx.doi.org/10.1007/s10856-006-0714-5.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Oktar, F.N., Yetmez, M., Agathopoulos, S. et al. Bond-coating in plasma-sprayed calcium-phosphate coatings. J Mater Sci: Mater Med 17, 1161–1171 (2006). https://doi.org/10.1007/s10856-006-0544-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10856-006-0544-5

Keywords

Search

Navigation