Abstract
Some wastes contain many reusable substances of high value. Solid leather waste is one such potential waste which can be converted into value added products. This study attempts to prepare leather insoles with acupressure effect from finished leather wastes and used leather wastes. Leather with acupressure effect (LAE) was fabricated using regenerated leather. LAE was characterized physico-chemically using Fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. Foot pressure measurements were done using LAE insoles on healthy individuals. Results proved that LAE insoles were able to increase the foot pressure of the wearer and thereby created an acupressure effect in them. Wearing of footwear with LAE insoles were beneficial compared to regular insoles. LAE possessed the required mechanical properties for insole production and it was also biodegradable in nature. The study proves that these composites could be successfully used for the production of cost-effective leather goods and therapeutic footwear. Production of useful byproducts from wastes is income generating and at the same time reduces environmental pollution and a feasible technology for waste recycling has been proved in this study.
Similar content being viewed by others
References
Midhaand V, Dey A (2008) Biological treatment of tannery waste water for sulfide removal. Int J Chem Sci 6:472–486
FAO (1998) World statistical compendium for raw hides and skins, leather and leather footwear. 1979–1997
Gish AJ (2000) Leather board, a practical use of tannery offal. J Am Leather Chem As 95:43–47
Senthil R, Hemalatha T, Kumar BS, Uma, TS, Das BN, Sastry TP (2015) Recycling of finished leather wastes: a novel approach. Clean Technol Environ Policy 17:187–197
Pati A, Chaudhary R, Subramani S (2014) A review on management of chrome-tanned leather shavings: a holistic paradigm to combat the environmental issues. Environ Sci Pollut Res. doi:10.1007/s11356-014-3055-9
Raghava Rao J, Thanikaivelan P, Sreeram KJ, Unni Nair B (2002) Green route for the utilization of chrome shavings (Chromium-containing solid waste) in tanning industry. Environ Sci Technol 36:1372–1376
Lakrafli H, Tahiri S, Albizane A, EI Otmani ME (2012) Effect of wet blue chrome shaving and buffing dust of leather industry on the thermal conductivity of cement and plaster based materials. Constr Build Mater 30:590–596
Sastry TP, Sehgal PK, Ramasamy T (2005) Value added eco- friendly products from tannery solid wastes. J Environ Sci Eng 47:250–255
Senthil R, Hemalatha T, Manikandan R, Das BN, Sastry TP (2015) Leather boards from buffing dust: a novel perspective. Clean Technol Environ Policy 17:571–576
Viswanathan V, Kesavan R, Kavitha KV, Kumpatle S (2011) A pilot study on the effects of a polyherbal formulation cream on diabetic foot ulcers. Indian J Med Res 134:168–173
Tsay SL, Chen ML (2003) Acupressure and quality of sleep in patients with end-stage renal disease–a randomized controlled trial. Int J Nurs Stud 40:1–7
Embong NH, Soh YC, Wong TW (2015) Revisiting reflexology: concept, evidence, current practice and practitioner training. J Tradit Complement Med 5:197–206
Senthil R, Vedakumarai WS, Hemalatha T, Das BN, Sastry TP (2015) Leather fibers as reinforcement for epoxy composites: a novel perspective. Fiber Polym 16: 181–187
Swarnalatha S, Srinivasulu T, Srimurali M, Sekaran G (2008) Safe disposal of toxic chrome buffing dust generated from leather industries. J Hazard Mater 150:290–299
AOAC (1990) Official methods of analysis.15th edn. Association of official analytical chemists, Washington DC
Peavy HS, Rowe DR, Tchobanogloas G (1985) Environmental Enginering, Mc Graw Hill, International Editions. McGraw-Hill Education, New York, pp. 584–585
Li L, Frey M, Browning KJ (2010) Biodegradability Study on Cotton and Polyester Fabrics. J Eng Fiber Fabr 5:42–53
Fourti O, Jedidi N, Hassen A (2010) Humic substances change during the co-composting process of municipal solid wastes and sewage sludge. World J Microbiol Biotechnol 26:2117–2122
Roy RV, Das M, Banerjee R, Bhowmick AK (2006) Comparative studies on crosslinked and uncrosslinked natural rubber biodegradation by Pseudomonas sp. Bioresour Technol 97:2485–2488
Rohana, Yahya YS, Azura AR, Ahmad Z (2011) Effect of Curing Systems on Thermal Degradation Behaviour of Natural Rubber (SMR CV 60). J Physica Sci 22:1–14
Prompunjai W, Sridach (2010) Preparation and Some Mechanical Properties of Composite Materials Made from Sawdust, Cassava Starch and Natural Rubber Latex. World Aca Sci Eng Technol 48:12–25
Dodwell G (1989) Components: guidelines and characteristics. SATRA Bulletin 208–209
Pantazi M, Stefan DM, Constantinescu R, Vasilescu AM (2014) Comparative Study on the Enzymatic Biodegradation of Synthetic and Tanned Leather Wastes. Rev Chim 65:233–236
Sharmila S, Jeyanthi Rebecca L (2014) A Comparative Study on the Degradation of Leather Industry Effluent by Marine Algae. Int J Pharm Sci Rev Res 25:46–50
Senthil R, Inbasekaran S, Kobi N, Das BN, Sastry TP (2015) Utilization of finished leather wastes for the production of blended fabrics. Clean Technol Environ Policy 17:1535–1544
Tatano F, Acerbi N, Monterubbiano C, Pretelli S, Tombari L, Mangani F (2012) Shoe manufacturing wastes: characterisation of properties and recovery options. Resour Conser Recy 66:66–75
Bernal MP, Paredes C, Sanchez-Monedero MA, Cegarra J (1998) Maturity and stability parameters of composts prepared with a wide range of organic wastes. Bioresour Technol 63:91–99
Brodsky JW, Kourosh S, Stills M, Mooney V (1998) Objective evaluation of insert material for, diabetic and athletic footwear. J Foot Ankle Res 9:111–116
Whittle MW, Chattanooga TN (1996) The Use of Viscoelastic Materials in Shoes and Insoles A Review. Magister Corporation, Printed in Canada. 07/05 LIB 7/05 LIB
Janisse DJ (1995) Prescription insoles and footwear. Clin Podiatr Medicine Surg 12:41–61
Karthikeyan R, Chandra Babu NK, Ramesh R (2013) Therapeutic applications of stingray leather. Glop J Biosci Biotechnol 2:287–289
Acknowledgements
R. Senthil acknowledges the funding support granted by the Department of Science and Technology. India.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
There is no conflict of interest.
Rights and permissions
About this article
Cite this article
Senthil, R., Sastry, T.P., Saraswathy, G. et al. Leather Insole with Acupressure Effect: New Perspectives. J Polym Environ 26, 175–182 (2018). https://doi.org/10.1007/s10924-016-0930-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-016-0930-0