Skip to main content
Log in

Thermal characterization of HITEC molten salt for energy storage in solar linear concentrated technology

  • Published:
Journal of Thermal Analysis and Calorimetry Aims and scope Submit manuscript

Abstract

The enhancement in the storage systems developed by solar thermoelectric centrals brings to this renewable energy a considerable efficiency increase. This improvement propitiates the design of storage fluids with lower melting point and higher thermal stability such as molten salt mixtures. This research has broadly studied the HITEC mixture composed by 53 mass% KNO3 + 40 mass% NaNO2 + 7 mass% NaNO3, with the aim to improve the existing solar salt used as energy storage fluid in CSP plants and focus the thermal properties obtained for application in solar linear concentrated technology. HITEC molten salt shows better physicochemical properties than the binary solar salt (60 % NaNO3 + 40 % KNO3), due to its lower melting point which can improve the work temperature range in commercial solar plants. The tested properties studied by differential scanning calorimeter and thermogravimetric analyser were melting points, heat capacities and thermal stability, mainly. This proposed mixture could be used as heat transfer fluid in solar linear concentrated technology extending the work range temperature between 130 and 550 °C. Results conclude that the main challenge in nitrite salts lies in the need to protect the sample above 350 °C with inert gas, to prevent oxidation of nitrite by oxygen.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. ISE, Fraunhofer., Levelized cost of electricity renewable energy technologies. http://www.ise.fraunhofer.de/en/publications/veroeffentlichungen-pdf-dateien-en/studien-und-konzeptpapiere/study-levelized-cost-of-electricity-renewable-energies.pdf, 2013.

  2. Beheshti A, Shanbedi M, Heris S. Heat transfer and rheological properties of transformer oil-oxidized MWCNT nanofluid. J Therm Anal Calorim. 2014;118(3):1451–60.

  3. Tompa AS. Low/high temperature relationships in dinitramide salts by DEA/DSC and study of oxidation of aluminum powders by DSC/TG. J Therm Anal. 1997;49(3):1161–70.

    Article  CAS  Google Scholar 

  4. Shuttleworth P, Budarin V, Clark J. Thermal investigation of a molten starch. J Therm Anal Calorim. 2011;105(2):577–81.

    Article  CAS  Google Scholar 

  5. Song L. Heat capacities and thermodynamic properties of MgBTC. J Therm Anal Calorim. 2010;101(1):365–70.

    Article  CAS  Google Scholar 

  6. Royall PG. The development of gas-flow modulation for high-frequency MTDSC measurements. J Therm Anal Calorim. 2000;60(3):795–805.

    Article  CAS  Google Scholar 

  7. Bates J. Control of heat transfer salts. Haudry Process Corporation, 1940. US2375758.

  8. Bates J. Treatment of alkali metals salts. Haudry Process Corporation, US2375761; 1944.

  9. Fahnestock F. Treatment of heat transfer salts. US2375760; 1942.

  10. Corporation H. Improvement relating to the use of molten salts in heat exchange circulating system. US545590; 1941.

  11. Kalichevsky V. Treatment of heat transfer salts II. US2375759; 1940.

  12. Picard G. Process for stabilizing a mixture of molten alkali metal nitrates and alkali metal nitrites usable particularly as a heat transfer fluid and stabilized mixture thus obtain. US4559993; 1985.

  13. Janz GJ. Melting and premelting properties of the KNO3–NaNO2–NaNO3 eutectic system. J Chem Eng. 1983;28:201–2.

    CAS  Google Scholar 

  14. Mochinaga J. Molar volumes of the molten NaNO3–NaNO2–KNO3 system. J Chem Eng Data. 1985;30:274–6.

    Article  CAS  Google Scholar 

  15. Bauer T, Laing D, Tamme R. Recent progress in alkali nitrate/nitrite developments for solar thermal power applications. Molten salt chemistry and Technology Conference, 2011.

  16. Greis O, Bahamdan KM, Uwais BM. The phase diagram of the system NaNO3-KNO3 studied by differential scanning calorimetry. Thermochim Acta. 1985;86:343–50.

    Article  CAS  Google Scholar 

  17. Fernandez AG. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants. Appl Energy. 2014;119:131–40.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors would like to acknowledge the financial support provided by CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile, Fondecyt Postdoctoral Grant No 3140014, FIC-R 30137092 funded by Atacama Government and the Education Ministry of Chile Grant PMI ANT 1201.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. G. Fernández.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fernández, A.G., Galleguillos, H., Fuentealba, E. et al. Thermal characterization of HITEC molten salt for energy storage in solar linear concentrated technology. J Therm Anal Calorim 122, 3–9 (2015). https://doi.org/10.1007/s10973-015-4715-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10973-015-4715-9

Keywords

Navigation