We develop a technology for the formation of coatings based on spraying of various target cathodes made of pure tungsten and bronze. To check the technology, we formed WC coatings with thicknesses of 4–9 μm on the substrates of BrAZh9-4 bronze and 12Kh18N10Т corrosion-resistant steel and studied their structure, morphology of the surface, and the inhomogeneity of electric resistance of the coating–substrate system in the direction normal to its surface. It is shown that the coatings have textures and contain nanoblocks 30 nm in size. It was also discovered that the morphology of the coating surface is sensitive to the conditions of their formation.
Similar content being viewed by others
References
F. I. Chaplygin, Tungsten Carbides [in Russian] (2011), Access mode: URL: http://www.kamet.com.ua/attachments/article/74/kv_1_2_1.pdf.
М. М. Student, H. V. Pokhmurs’ka, and Kh. R. Zadorozhna, “Structure and wear resistance of VC–FeCr and VC–FeCrСо coatings, obtained by supersonic flame spraying,” Fiz.-Khim. Mekh. Mater.,54, No. 1, 31–37 (2018); English translation:Mater. Sci.,54, No. 1, 22–29 (2018).
M. Student, Yu. Dzioba, V. Hvozdets’kyi, H. Pokhmurs’ka, V. Wielage, and T. Grund, “High-temperature corrosion of electric-arc coatings sprayed from powder core wires based on the Fe–Cr–B–Al system,” Fiz.-Khim. Mekh. Mater.,44, No. 5, 93–97 (2008); English translation:Mater. Sci.,44, No. 5, 693–699 (2008).
А. А. Rempel’, “Effects of atomic and vacancy ordering in nonstoichiometric carbides,” Usp. Fiz. Nauk,166, No. 1, 33–62 (1996).
V. V. Kolesnik, V. P. Kolesnik, and D. V. Slyusar’, “Application of multicomponent coatings with controlled composition over the length of a product,” in: Proc. IX Internat. Symp. on Radiation Plasma Dynamics [in Russian], NITs “Inzhener”, Moscow (2012), pp. 233–238.
O. V. Sobol’, “Mechanism of formation of the phase-structural state of condensates obtained by ionic spraying,” Fiz. Inzhener. Poverkh.,6, No. 1–2, 20–36 (2008).
“Oxford Cryosystems. Crystallographica Search-Match,” J. Appl. Crystallography,32, No. 2, 379–380 (1999).
I. S. Grigor’ev and E. Z. Meilikhov, Physical Quantities: A Handbook [in Russian], Énergoatomizdat, Moscow (1991).
O. N. Chugai, S. L. Abashin, A. V. Gaidachuk, D. P. Zherebyat’ev, E. A. Zhuk, Y. A. Yatsyna, A. A. Poluboyarov, S. V. Sulima, and I. S. Terzin, “Compositional and dielectric inhomogeneities in melt-grown CdZnTe crystals,” Inorganic Mater.,51, No. 10, 972–977 (2015).
T. Ryu, H. Y. Sohn, K. S. Hwang, and Z. Z. Fang, “Plasma synthesis of tungsten carbide nanopowder from ammonium paratungstate,” J. Amer. Ceram. Soc.,92, No. 3, 655–660 (2009).
A. Santos, C. Gonzalez, and Z. Y. Ramirez, “Characterization of tungsten carbide coatings deposited on AISI 1020 steel,” J. Phys.: Conf. Ser.,786 (2017). – DOI: https://doi.org/10.1088/1742-6596/786/1/012011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 55, No. 2, pp. 77–80, March–April, 2019.
Rights and permissions
About this article
Cite this article
Kolesnyk, V.P., Chuhai, O.М., Slyusar, D.V. et al. Structure and Properties of Ionic-Plasma WC Coatings. Mater Sci 55, 220–224 (2019). https://doi.org/10.1007/s11003-019-00292-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-019-00292-1