nach oben

Mechanics of Composite Materials

Erschienen in:

01.07.2014

Modeling Large Deformations of Fibrous Bodies of Revolution Based on Applied and Carcass Theories 2. Reduction by Pressure

verfasst von: V. M. Akhundov

Erschienen in: Mechanics of Composite Materials | Ausgabe 3/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

On the basis of single-level applied and two-level carcass theories, large deformations of regularly fiber-reinforced bodies are examined. Results of solution of the problem on pressure-reduction of unidirectionally reinforced prismatic and cylindrical bodies rigidly fixed at their end faces, whose matrix and fibers are made of compressible materials, are presented. The results obtained by both the theories are compared, and the possibility of using, under the conditions considered, solely the carcass theory in investigating pressurt-reduced bodies highly filled with fibers is clarified.

Vorheriger Artikel Single and Multiple Scattering of Inplane Waves by Nanofibers with Consideration of Interface Effects

Nächster Artikel Composite Films Based on Styrene-co-butyl-acrylate with Colemanite and Calcium Bentonite Mineral Fillers

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. M. Akhundov, “Modeling large deformations of fibrous bodies of revolution based on applied and carcass theories. Butt-end torsion of cylindrical and toroidal вodies,” Mech. Compos. Mater., 50, No. 2, 245-256 (2014).CrossRef

V. M. Akhundov, “Applied theory of composites with a small content of fibers under large deformations,” Mech. Compos. Mater. Struct., 7, No. 1, 3-15 (2001).

V. M. Akhundov, “Structural macroscopic theory of stiff and soft composites. Invariant description,” Mech. Compos. Mater., 34, No. 5, 419-432 (1998).CrossRef

V. M. Akhundov, “Carcass theory of stiff and soft composites with uncurved and curved structures. Invariant description,” Mech. Compos. Mater. Struct., 6, No. 2, 275-293 (2000).

N. S. Bakhvalov, N. P. Zhidkov, and G. M. Kobel’kov, Numerical Methods [in Russian], Nauka, Moscow (1987).

F. L. Chernous’ko and V. P. Banichuk, Variational Problems of Mechanics and Control [in Russian], Nauka, Moscow (1973).

A. S. Sakharov and I. Altenbach (eds.), Finite-Element Method in the Mechanics of Solid Bodies [in Russian], Vishcha Shkola, Kiev (1982).

R. P. Fedorenko, Approximate Solution of Problems of Optimum Control [in Russian], Nauka, Moscow (1978).

M. Levinson and I. W. Burgess, “A comparison of some simple constitutive relations for slightly compressible rubberlike materials,” Int. J. Mech. Sci., 13, 563-572 (1971).CrossRef

10.

P. J. Blatz, Application of Finite Elastic Theory in Predicting the Performance of Solid Propellant Rocket Motors, Calif. Inst. Techn. GALCJISM (1960), pp. 60-125.

11.

V. A. Kabanov et al. (eds), Encyclopedia of Polymers, Vol. 3 [in Russian], Sovets. Entsikl., Moscow (1977).

12.

V. M. Akhundov, “Analysis of elastomeric composites based on fiber-reinforced systems. 2. Unidirectional composites,” Mech. Compos. Mater., 35, No. 1, 19-32 (1999).CrossRef

Titel: Modeling Large Deformations of Fibrous Bodies of Revolution Based on Applied and Carcass Theories 2. Reduction by Pressure
verfasst von: V. M. Akhundov
Publikationsdatum: 01.07.2014
Verlag: Springer US
Erschienen in: Mechanics of Composite Materials / Ausgabe 3/2014
Print ISSN: 0191-5665
Elektronische ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-014-9418-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2014

Water Uptake of a Silorane-Based Composite Used in Restorative Dentistry

Single and Multiple Scattering of Inplane Waves by Nanofibers with Consideration of Interface Effects

Theoretical-Experimental Method for Determining the Parameters of Damping Based on the Study of Damped Flexural Vibrations of Test Specimens 2. Aerodynamic Component of Damping

Yield Hypersurfaces of a Three-Layer Composite Shell With a Fiber-Reinforced Middle Layer

Mechanical and Impact Properties of PLA/2 × 2 Twill and 4 × 4 Hopsack Weave Flax Textile Composites Produced by the Interval Hot Pressing Technique

Composite Films Based on Styrene-co-butyl-acrylate with Colemanite and Calcium Bentonite Mineral Fillers

Premium Partner

Marktübersichten