Abstract
The oxidation behaviour of a thermal barrier coating (TBC) system is a major concern as the growth of the thermally grown oxide (TGO) layer on the bond-coating creates stresses that greatly favour the thermal barrier spallation. To delay the loss of the thermal protection provided, research has focused on the bond-coating composition and microstructure as well as on the parameters required for a suitable pre-oxidation treatment before the deposition of the ceramic top coat. Platinum is known to enhance the oxidation/corrosion resistance of MCrAlY coatings. The effect of Pt on the oxidation behaviour of a NiCoCrAlYTa coating was assessed in this study. In addition, pre-oxidation treatments were conducted to determine if the oxidation behaviour of the modified NiCoCrAlYTa coating could be further improved.
Similar content being viewed by others
References
J. R. Nicholls, M. J. Deakin and D. S. Rickerby, Wear 233, 352 (1999).
R. G. Wellman, M. J. Deakin and J. R. Nicholls, Wear 258, 349 (2005).
C. Mercer, S. Faulhaber, A. G. Evans and R. Darolia, Acta Materialia 53, 1029 (2005).
S. Krämer, S. Faulhaber, M. Chambers, D. R. Clarke, C. G. Levi, J. W. Hutchinson and A. G. Evans, Materials Science and Engineering: A 490, 26 (2008).
A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier and F. S. Pettit, Progress in Materials Science 46, 505 (2001).
D. Strauss, G. Müller, G. Schumacher, V. Engelko, W. Stamm, D. Clemens and W. J. Quadakkers, Surface & Coatings Technology 135, 196 (2001).
D. Monceau, F. Crabos, A. Malie, B. Pieraggi, Materials Science Forum, 369–372, 670 (2001).
H. Lau, C. Leyens, U. Schulz and C. Friedrich, Surface & Coatings Technology 165, 217 (2003).
V. K. Tolpygo and D. R. Clarke, Surface & Coatings Technology 200, 1276 (2005).
B. Baufeld and U. Schulz, Surface & Coatings Technology 201, 2667 (2006).
M. Matsumoto, T. Kato, K. Hayakawa, N. Yamaguchi, S. Kitaoka and H. Matsubara, Surface & Coatings Technology 202, 2743 (2008).
R. Mevrel, Materials Science and Engineering A120, 13 (1989).
J. R. Nicholls, Jom-Journal of the Minerals Metals & Materials Society 52, 28 (2000).
J. R. Nicholls, MRS Bulletin Sept, 659 (2003).
D. P. Whittle and J. Stringer, Philosophical Transactions of the Royal Society of London A295, 309 (1980).
G. Fisher, P. K. Datta, J. S. Burnell-Gray, W. Y. Chan and J. C. Soares, Surface & Coatings Technology 110, 24 (1998).
J. Toscano, R. Vaβen, A. Gil, M. Subanovic, D. Naumenko, L. Singheiser and W. J. Quadakkers, Surface & Coatings Technology 201, 3906 (2006).
H. Guo, L. Sun, H. Li and S. Gong, Thin Solid Films 516, 5732 (2008).
E. J. Felten, Oxidation of Metals 10, 23 (1976).
R. Lowrie and D. H. Boone, Thin Solid Films 45, 491 (1977).
L. Peichl and D. F. Bettridge, Overlay and diffusion coatings for aero gas turbines, in Materials for Advanced Power Engineering, Part I, Proceeding International Conference 1994, Liege eds. D. Coutsouradis et al. (Kluwer Acad. Publ., Dordrecht, 1994), p. 717.
T. A. Taylor and D. F. Bettridge, Surface & Coatings Technology 86–87, 9 (1996).
W. J. Quadakkers, V. Shemet, D. Sebold, R. Anton, E. Wessel and L. Singheiser, Surface & Coatings Technology 199, 77 (2005).
N. M. Yanar, F. S. Pettit and G. H. Meier, Metallurgical and Materials Transactions A 37A, 1563 (2007).
A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage and N. Hitchman, Journal of Thermal Spray Technology 17, 199 (2008).
F. H. Stott, B. Gleeson and P. Castello, Materials at High Temperature 16, 15 (1999).
X. Zhao, T. Hashimoto and P. Xiao, Scripta Materialia 55, 1051 (2006).
A. Vande Put, M.-C. Lafont, D. Oquab, A. Raffaitin, and D. Monceau, Surface & Coatings Technology, 205, 717 (2010)
V. K. Tolpygo, D. R. Clarke and K. S. Murphy, Metallurgical and Materials Transactions A 32A, 1467 (2001).
Web site http://rruff.info/. Accessed 6 Mar 2011.
Web site http://riodb.ibase.aist.go.jp/rasmin/E_index.htm. Accessed 6 Mar 2011.
R. Mevrel and C. Duret, in Advanced Workshop: Coatings for Heat Engines, Aquafredda di Maretea, Italy (1984).
A. M. Huntz, A. Boumaza and G. Moulin, Oxidation of Metals 30, 141 (1988).
A. Boudot, PhD, National Polytechnic Institute of Toulouse, Toulouse, France (2000).
S. Dryepondt, PhD, National Polytechnic Institute of Toulouse, Toulouse, France (2004).
A. Raffaitin, PhD, National Polytechnic Institute of Toulouse, Toulouse, France (2007).
B. Gleeson, W. Wang, S. Hayashi and D. Sordelet, Material Science Forum 461–464, 213 (2004).
E. Copland, Thermodynamic Effect of Platinum Addition to beta-NiAl: An Initial Investigation. Technical Report No. NASA/CR-2005-213330 (NASA, 2005).
E. Copland, Journal of Phase Equilibria and Diffusion 28, 38 (2007).
D. Monceau and B. Pieraggi, Oxidation of Metals 50, 477 (1998).
Y. Cadoret, D. Monceau, M. Bacos, P. Josso, V. Maurice and P. Marcus, Oxidation of Metals 64, 185 (2005).
M. W. Brumm and H. J. Grabke, Corrosion Science 33, 1677 (1992).
D. Oquab, D. Monceau, Y. Thébault and C. Estournes, Materials Science Forum 595–598, 143 (2008).
J. L. Smialek, Journal of the Minerals 58, 29 (2006).
V. Déneux, Y. Cadoret, S. Hervier and D. Monceau, Oxidation of Metals 73, 83 (2010).
S. Chevalier, Traitement de surface et nouveaux matériaux: Quelles solutions pour lutter contre la dégradation des matériaux à haute température (Laballery Impr., Universitary editions of Dijon, 2007), p. 164.
B. A. Pint, Oxidation of Metals 45, 1 (1996).
U. Schulz, K. Fritscher and A. Ebach-Stahl, Surface and Coatings Technology 203, 449 (2008).
B. A. Pint, Special Issue on Science & Technology of Alumina of the Journal of the American Ceramic Society 86, 686 (2003).
B. A. Pint, K. L. More and I. G. Wright, Materials at High Temperatures 20, 375 (2003).
H. M. Tawancy, A. I. Mohamed, N. M. Abbas, R. E. Jones and D. S. Rickerby, Journal of Materials Science 38, 3797 (2003).
A. Hesnawi, H. Li., Z. Zhou, S. Gong and H. Xu, Vacuum 81, 947 (2007).
N. Vialas and D. Monceau, Oxidation of Metals 66, 155 (2006).
A. R. Nicoll and G. Wahl, Paper Presented at the “Superalloys 1984” (TMS, 1984), p. 805.
H. Nickel, D. Clemens, W. J. Quadakkers and L. Singheiser, Journal of Pressure Vessel Technology, Transactions of the ASME 121, 384 (1999).
J. M. N. G. Muamba and R. Streiff, Materials Science and Engineering A121, 391 (1989).
H. M. Tawancy, N. Sridhar and N. M. Abbas, Journal of Materials Science 35, 3615 (2000).
B. A. Pint, J. A. Haynes, K. L. More, I. G. Wright, and C. Leyens, Paper Presented at the Superalloys 2000 (TMS, Warrendale, PA 2000).
A. M. Huntz, A. Boumaza, G. Moulin, and J. L. Lebrun, Paper Presented at the Advanced Materials and Processing Techniques for Structural Applications, Paris, France (1987).
P. Fox and G. J. Tatlock, Materials Science and Technology 5, 816 (1989).
S. K. Bose and H. J. Grabke, Zeitschrift fur Metallkunde 69, 8 (1978).
M. W. Chen, M. L. Glynn, R. T. Ott, T. C. Hufnagel and K. J. Hemker, Acta Materialia 51, 4279 (2003).
M. W. Chen, R. T. Ott, T. C. Hufnagel, P. K. Wright and K. J. Hemker, Surface and Coatings Technology 163–164, 25 (2003).
D. S. Balint and J. W. Hutchinson, Journal of the Mechanics and Physics of Solids 53, 949 (2005).
V. K. Tolpygo and D. R. Clarke, Acta Materialia 48, 3283 (2000).
A. Vande Put, D. Oquab and D. Monceau, Materials Science Forum 595–598, 213 (2008).
J. A. Haynes, M. J. Lance, B. A. Pint and I. G. Wright, Surface and Coatings Technology 146–147, 140 (2001).
S. Laxman, B. Franke, B. W. Kempshall, Y. H. Sohn, L. A. Giannuzzi and K. S. Murphy, Surface & Coatings Technology 177–178, 121 (2004).
M. J. Stiger, N. M. Yanar, R. W. Jackson, S. J. Laney, F. S. Pettit, G. H. Meier, A. S. Gandhi and C. G. Levi, Metallurgical and Materials Transactions A 38A, 848 (2007).
U. Schulz, M. Menzebach, C. Leyens and Y. Q. Yang, Surface & Coatings Technology 146–147, 117 (2001).
K. S. Murphy, K. L. More and M. J. Lance, Surface and Coatings Technology 146–147, 152 (2001).
C. G. Levi, E. Sommer, S. G. Terry, A. Catanoiu and M. Rhüle, Journal of the American Ceramic Society 86, 676 (2003).
M. Hu, S. Guo, T. Tomimatsu, Y. Ikuhara and Y. Kagawa, Surface & Coatings Technology 200, 6130 (2006).
M. J. Stiger, N. M. Yanar, F. S. Pettit, and G. H. Meier, Elevated Temperature Coatings: Science and Technology III (The Minerals, Metals and Materials Society, Warrendale, PA, 1999), p. 51.
H. Hindam and D. P. Whittle, Oxidation of Metals 18, 245 (1982).
Acknowledgments
Turbomeca (Safran Group) are gratefully acknowledged for providing the samples and for the financial support of this study. Authors express their thanks to Praxair ST which manufactured the bond-coatings, to Snecma for grit blasting the TBC systems and to C.C.C which made EB-PVD thermal barrier coatings. J.P. Grenet from IPREM (Pau, France) is gratefully acknowledged for Raman and photoluminescence spectroscopy analyses, Turboméca and CNRS for the doctoral grant of A. Vande Put.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vande Put, A., Oquab, D., Péré, E. et al. Beneficial Effect of Pt and of Pre-Oxidation on the Oxidation Behaviour of an NiCoCrAlYTa Bond-Coating for Thermal Barrier Coating Systems. Oxid Met 75, 247–279 (2011). https://doi.org/10.1007/s11085-011-9241-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-011-9241-y