Abstract
The influence exerted by electric-spark spraying on the kinetics of mass transfer and the physicomechanical properties of coatings is investigated. It is shown that electric-spark spraying is determined by the dynamic properties of the cathode jets, which depend on the electrical parameters of the spark discharge, the size of the interelectrode interval, and the physical properties of the coatings, which vary during spraying.
Similar content being viewed by others
References
G. G. Gnesin and S. N. Fomenko, “Wear-resistant coatings on tool materials (review),” Poroshk. Metall., Nos. 9–10, 17–27 (1966).
A. D. Verkhoturov, I. A. Podchernyaeva, A. D. Panasyuk, et al., “Effect of spark-induced alloying on the heat resistance of steels,” Poroshk. Metall., No. 3, 69–74 (1988).
B. R. Lazarenko, V. V. Mikhailov, A. E. Gitlevich, et al., “Distribution of elements in surface layers during spark-induced alloying,” Elektron. Obrab. Mat., No. 3, 28–33 (1977).
A. D. Verkhoturov, Yu. I. Mulin, D. V. Yarkov, et al., “Protective coatings formed during spark-induced alloying by new electrode materials based on tungsten obtained directly from mineral raw material,” Perspektiv. Mat., No. 1, 70–79 (1999).
V. I. Rakhovskii, Physical Bases of Current Commutation in Vacuo [in Russian], Nauka, Moscow (1970).
G. A. Mesyats, “Ectone-electron avalanche from metal,” Ukr. Fiz. Zhurn., 165, No. 6, 601–626 (1995).
S. L. Mandel’shtam and S. M. Raiskii, “On the mechanism of electric erosion of metals,” Izv. Akad. Nauk SSSR. Ser. Fiz., 13, No. 5, 549–565 (1949).
B. N. Zolotykh and K. Kh. Gioev, “Role of pulse-discharge flares in energy transmission and electrode erosion,” Physical Bases of Electric-Spark Treatment of Materials [in Russian], Nauka, Moscow (1966), pp. 16–31.
B. I. Stavitskii, “Electric-spark precision treatment of materials and scientific bases of superaccurate methods of surface formation,” Elektron. Obrab. Mat., No. 1, 5–32 (2002).
G. A. Bovkun, A. V. Laptev, Yu. G. Tkachenko, and L. M. Yurchuk, “Effect of production conditions of hard alloys on their erosion characteristics,” Elektron. Obrab. Mat., No. 1, 33–38 (2002).
B. G. Semiletenko and V. N. Uskov, “Experimental relationships defining the position of shock waves in a jet impinging on an obstacle perpendicular to its axis,” Inzh. Fiz. Zhurn., 23, No. 3, 453–458 (1972).
L. P. Kiselevskii and V. A. Morozov, “On the mechanism of electrode destruction by supersonic flares,” Electric Contacts [in Russian], Nauka, Moscow (1973), pp. 43–46.
Author information
Authors and Affiliations
Additional information
__________
Translated from Poroshkovaya Metallurgiya, Nos. 11–12(452), pp. 99–106, November–December, 2006.
Rights and permissions
About this article
Cite this article
Belik, V.D., Litvin, R.V. & Koval’chenko, M.S. Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer. Powder Metall Met Ceram 45, 593–598 (2006). https://doi.org/10.1007/s11106-006-0124-8
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11106-006-0124-8