Abstract
“Stimulated reservoir volume”(SRV) makes shale gas production economic through new completion techniques including horizontal wells and multiple hydraulic fractures. However, the mechanism behind these treatments that provide sufficient permeability is not well understood. The effects of different stimulation treatments need to be further explored. To understand the effects of fracture surface roughness, fracture registration, confining pressure, proppant type and distribution mode, fiber and acidizing treatment on fracture permeability, a series of laboratory permeability experiments were performed on fractured cores from shale formation of Shengli Oilfield. The results of this study demonstrate that sedimentary bedding of shale has important influence on matrix permeability. At 35 MPa confining pressure, the permeability of aligned fracture (unpropped and without fracture offset) can increase about 1–3 orders of magnitude over shale matrix. The permeability of displaced fracture can increase about 1–2 orders of magnitude over the aligned fracture. The permeability of fracture propped with proppant can increase about 2–4 orders of magnitude over unpropped fracture. The greater the fracture surface roughness, the higher the permeability. The increasing degree of displaced fracture permeability is not proportional to the amount of fracture offset. In the microfracture of shale, the effect of ceramic proppant is still better than that of quartz sand, and the permeability of a centralized fairway distribution of proppant is about 1.2 times better than an even monolayer distribution of proppant. Under high pressure, proppant is easy to cause the break of fracture faces of brittle shale, and increase local fracture permeability to some extent. However, quartz sand are more easily broken to embed and block microcracks just made, which results in fracture permeability lower than that of ceramic proppant. At the same time, the argillation phenomenon is easy to happen on propped fracture faces of shale, which is one of the main factors that leads to a substantial decline in fracture permeability. The permeability of displaced fracture propped with proppant is greater than that of aligned fracture propped with proppant. Because of added fiber presence, the permeability of microfractures presented in SRV is greatly reduced. The pressure dependence of aligned fractures in shale obeys Walsh’s theory, but the pressure dependence of propped and displaced fractures in shale obeys Walsh’s law over a limited range of pressures. Deviations reflect proppant seating, proppant embedding and breaking. For shale formation with the high carbonate content, acidizing treatment should be carefully implemented. Experimental results may provide more valuable information for effective design of hydraulic fracturing in shale reservoir.
Similar content being viewed by others
References
Bandis, S., Lumsden, A.C., Barton, N.R.: Fundamentals of rock joint deformation. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 20(6), 249–268 (1983)
Barton, N., Bandis, S., Bakhtar, K.: Strength, deformation and conductivity coupling of rock joints. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 22(3), 121–140 (1985)
Brannon, H.D., Starks, T.R.: The impact of effective fracture area and conductivity on fracture deliverability and stimulation value. SPE 116057. Presented at the SPE Annual Technical Conference and Exhibition, pp. 21–24. Denver, Colorado, 21–24 September 2008
Brown, S.E.: Fluid flow through rock joints: the effect of surface roughness. J. Geophys. Res. 92(2), 1337–1347 (1987)
Cipolla, C.L., Warpinski, N.R., Mayerhofer, M.J.: Hydraulic fracture complexity: diagnosis, remediation, and exploitation. SPE 115771. Presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 20–22 October 2008
Cipolla, C.L., Warpinski, N.R., Mayerhofer, M.J., Lolon, E.P.: The relationship between fracture complexity, reservoir properities, and fracture-treatment design. SPE 115769. Presented at the SPE Annual Technical Conference and Exhibition, pp. 21–24. Denver, Colorado 21–24 September 2008
Fredd, C.N., McConnell, S.B., Boney, C.L., England, K.W.: Experimental study of fracture conductivity for water-fracturing and conventional fracturing applications. SPE J 6(3), 288–298 (2001)
Gangi, A.F.: Variation of whole and fractured porous rock permeability with confining pressure. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15(5), 249–257 (1978)
Guo, T.K., Zhang, S.C., Xiao, B., Liu, G.Q., Wang, F., Zhang, J.C., Bian, X.B.: Evaluation and optimization of new nanocomposite fiber for fracturing technology based on a new equipment. Transp. Porous Media 94, 243–257 (2012)
Kranz, R.L., Frankel, A.D., Englder, T., Scholz, C.H.: The permeability of whole and jointed Barre Granite. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 16, 225–234 (1979)
Makurat, A., Gutierrez, M.: Fracture flow and fracture cross flow experiments. SPE 36732. Presented at the SPE Annual Technical Conference and Exhibition, Denver, 6–9 October 1996
Mayerhofer, M.J., Lolon, E.P., Warpinski, N.R., Cipolla, C.L., Walser, D., Rightmire, C.M.: What is stimulated reservoir volume (SRV)? SPE 119890. Presented at the SPE Shale Gas Production Conference, Fort Worth, Texas, November 2008
McDaniel, B.W.: Realistic fracture conductivities of proppants as a function of reservoir temperature. SPE 16453. Presented at the SPE/DOE Low Permeability Reservoirs Symposium, Denver, 18–19 May 1987
Olsson, W.A., Brown, S.R.: Hydromechanical response of a fracture undergoing compression and shear. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 30(7), 845–851 (1993)
Patton, P.C.: Multiple modes of shear failure in rock and related material. Ph.D. Thesis, University of Illinois, Urbana, 1966
Penny, G.S.: An evaluation of the effects of environmental conditions and fracturing fluids upon the long-term conductivity of proppants. SPE 16900. Presented at the SPE Annual Technical Conference and Exhibition, Dallas, 27–30 September 1987
Powell, A., Bustos, O., Kordziel, W., Olsen, T., Sobernheim, D., Vizurraga, T.: Fiber-laden fracturing fluid improves production in the bakken shale multilateral play. SPE 107979. Presented at the SPE Rocky Mountain Oil and Gas Technology Symposium, pp. 16–18. Denver, Colorado, 16–18 April 2007
Richman, R., Mullen, M., Petre, E., Grieser, B., Kundert, D.: A practical use of shale petrophysics for stimulation design optimization all shale plays are not clones of the barnett shale. SPE 115258. Presented at the SPE Annual Technical Conference and Exhibition, Denver, Colorado, 21–24 September 2008
Tsang, Y.W., Witherspoon, P.A.: The dependence of fracture mechanical and fluid flow properties on fracture roughness and sample size. J. Geophys. Res. 88(3), 2359–2366 (1983)
Walsh, J.B.: Effect of pore pressure and confining pressure on fracture permeability. Int. J. Rock Mech. Mining Sci. 18, 429–435 (1981)
Zhang, Y.H., Zhou, H.W., Xie, H.P.: Improved cubic covering method for fractal dimensions of a fracture surface of rock. Chin. J. Rock Mech. Eng. 24(17), 3192–3196 (2005)
Zhou, H.W., Xie, H.: Direct estimation of the fractal dimensions of a fracture surface of rock. Surf. Rev. Lett. 10(5), 751–762 (2003)
Zhuang, Z.F., Zhang, S.C., Zhang, J., Sun, L.T., Liu, C.Y.: Effects of degradable fiber on BXHPG fracturing fluid. Oilfield Chem. 27(1), 26–28 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo, T., Zhang, S., Gao, J. et al. Experimental Study of Fracture Permeability for Stimulated Reservoir Volume (SRV) in Shale Formation. Transp Porous Med 98, 525–542 (2013). https://doi.org/10.1007/s11242-013-0157-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11242-013-0157-7