Skip to main content
Erschienen in: Tribology Letters 2/2014

01.02.2014 | Original Paper

Dry-Sliding Tribological Properties of TiAl/Ti2AlC Composites

verfasst von: Jun Cheng, Fei Li, Licai Fu, Zhuhui Qiao, Jun Yang, Weimin Liu

Erschienen in: Tribology Letters | Ausgabe 2/2014

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The microstructure, mechanical and dry-sliding tribological properties of TiAl-based composites with 20 and 40 vol% in situ formed Ti2AlC, produced by hot press sintering process, are investigated. The microstructural characterization reveals that Ti2AlC phase is in the form of spherical particles and large blocks, and the quantity of the blocks increases with Ti2AlC content. This difference in the morphology and distribution of the Ti2AlC phase leads to the discrepancy of the wear resistance of the composites. In contrast to the Ti-46Al-2Cr-2Nb intermetallics, the dry-sliding wear resistance of the TiAl/Ti2AlC composites first declines slightly and then enhances with the Ti2AlC content. Furthermore, the TiAl/40 % Ti2AlC composite shows low wear rate at higher sliding speed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Rastkar, A., Shokri, B.: A multi-step process of oxygen diffusion to improve the wear performance of a gamma-based titanium aluminide. Wear 264, 973–979 (2008)CrossRef Rastkar, A., Shokri, B.: A multi-step process of oxygen diffusion to improve the wear performance of a gamma-based titanium aluminide. Wear 264, 973–979 (2008)CrossRef
2.
Zurück zum Zitat Das, G., Kestler, H., Clemens, H., Bartolotta, P.: Sheet gamma TiAl: status and opportunities. JOM 56, 42–45 (2004)CrossRef Das, G., Kestler, H., Clemens, H., Bartolotta, P.: Sheet gamma TiAl: status and opportunities. JOM 56, 42–45 (2004)CrossRef
3.
Zurück zum Zitat Tetsui, T., Ono, S.: Endurance and composition and microstructure effects on endurance of TiAl used in turbochargers. Intermetallics 7, 689–697 (1999)CrossRef Tetsui, T., Ono, S.: Endurance and composition and microstructure effects on endurance of TiAl used in turbochargers. Intermetallics 7, 689–697 (1999)CrossRef
4.
Zurück zum Zitat Jin, Y., Wang, J., Yang, J., Wang, Y.: Microstructure refinement of cast TiAl alloys by β solidification. Scripta Mater. 51, 113–117 (2004)CrossRef Jin, Y., Wang, J., Yang, J., Wang, Y.: Microstructure refinement of cast TiAl alloys by β solidification. Scripta Mater. 51, 113–117 (2004)CrossRef
5.
Zurück zum Zitat Kim, Y.-W.: Ordered intermetallic alloys, part III: gamma titanium aluminides. JOM 46, 30–39 (1994)CrossRef Kim, Y.-W.: Ordered intermetallic alloys, part III: gamma titanium aluminides. JOM 46, 30–39 (1994)CrossRef
6.
Zurück zum Zitat Kong, F., Xu, X., Chen, Y., Zhang, D.: Microstructure and mechanical properties of large size as-cast Ti–43Al–9 V–0.2 Y (at.%) alloy ingot from brim to centre. Mater. Design 33, 485–490 (2012)CrossRef Kong, F., Xu, X., Chen, Y., Zhang, D.: Microstructure and mechanical properties of large size as-cast Ti–43Al–9 V–0.2 Y (at.%) alloy ingot from brim to centre. Mater. Design 33, 485–490 (2012)CrossRef
7.
Zurück zum Zitat Ge, N., Hongsheng, D., Ruirun, C., Jingjie, G., Hengzhi, F.: Microstructural control and mechanical properties of Ti-47Al-2Cr-2Nb alloy by directional solidification electromagnetic cold crucible technique. Mater. Design 39, 350–357 (2012)CrossRef Ge, N., Hongsheng, D., Ruirun, C., Jingjie, G., Hengzhi, F.: Microstructural control and mechanical properties of Ti-47Al-2Cr-2Nb alloy by directional solidification electromagnetic cold crucible technique. Mater. Design 39, 350–357 (2012)CrossRef
9.
Zurück zum Zitat Kim, Y-W., Clemens, H., Rosenberger, AH.: Gamma titanium aluminides 2003. TMS, Warrendale (2003) Kim, Y-W., Clemens, H., Rosenberger, AH.: Gamma titanium aluminides 2003. TMS, Warrendale (2003)
10.
Zurück zum Zitat Cheng, J., Yang, J., Zhang, X., Zhong, H., Ma, J., Li, F., et al.: High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics. Intermetallics 31, 121–126 (2012)CrossRef Cheng, J., Yang, J., Zhang, X., Zhong, H., Ma, J., Li, F., et al.: High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics. Intermetallics 31, 121–126 (2012)CrossRef
11.
Zurück zum Zitat Cheng, J., Yang, J., Ma, J., Bi, Q., Zhang, X., Fu, L., et al.: The tribological behavior of a Ti-46Al-2Cr-2Nb alloy under liquid paraffine lubrication. Tribol. Lett. 46, 1–9 (2012)CrossRef Cheng, J., Yang, J., Ma, J., Bi, Q., Zhang, X., Fu, L., et al.: The tribological behavior of a Ti-46Al-2Cr-2Nb alloy under liquid paraffine lubrication. Tribol. Lett. 46, 1–9 (2012)CrossRef
12.
Zurück zum Zitat Li, C., Xia, J., Dong, H.: Sliding wear of TiAl intermetallics against steel and ceramics of Al2O3, Si3N4 and WC/Co. Wear 261, 693–701 (2006)CrossRef Li, C., Xia, J., Dong, H.: Sliding wear of TiAl intermetallics against steel and ceramics of Al2O3, Si3N4 and WC/Co. Wear 261, 693–701 (2006)CrossRef
13.
Zurück zum Zitat Rastkar, A., Bloyce, A., Bell, T.: Sliding wear behaviour of two gamma-based titanium aluminides. Wear 240, 19–26 (2000)CrossRef Rastkar, A., Bloyce, A., Bell, T.: Sliding wear behaviour of two gamma-based titanium aluminides. Wear 240, 19–26 (2000)CrossRef
14.
Zurück zum Zitat Chu, C., Wu, S.: A study on the dry uni-directional sliding behaviour of titanium aluminides. Scr. Metall. Mater. 33, 139–143 (1995)CrossRef Chu, C., Wu, S.: A study on the dry uni-directional sliding behaviour of titanium aluminides. Scr. Metall. Mater. 33, 139–143 (1995)CrossRef
15.
Zurück zum Zitat Liu, X., Tian, W., Xu, W., Liang, W., Xu, Z.: Wear resistance of TiAl intermetallics by plasma alloying and plasma carburization. Surf. Coat. Tech. 201, 5278–5281 (2007)CrossRef Liu, X., Tian, W., Xu, W., Liang, W., Xu, Z.: Wear resistance of TiAl intermetallics by plasma alloying and plasma carburization. Surf. Coat. Tech. 201, 5278–5281 (2007)CrossRef
16.
Zurück zum Zitat Liu, X.B., Wang, H.M.: Modification of tribology and high-temperature behavior of Ti-48Al-2Cr-2Nb intermetallic alloy by laser cladding. Appl. Surf. Sci. 252, 5735–5744 (2006)CrossRef Liu, X.B., Wang, H.M.: Modification of tribology and high-temperature behavior of Ti-48Al-2Cr-2Nb intermetallic alloy by laser cladding. Appl. Surf. Sci. 252, 5735–5744 (2006)CrossRef
17.
Zurück zum Zitat Sopunna, K., Thongtem, T., McNallan, M., Thongtem, S.: Formation of titanium nitride on γ-TiAl alloys by direct metal-gas reaction. J. Mater. Sci. 41, 4654–4662 (2006)CrossRef Sopunna, K., Thongtem, T., McNallan, M., Thongtem, S.: Formation of titanium nitride on γ-TiAl alloys by direct metal-gas reaction. J. Mater. Sci. 41, 4654–4662 (2006)CrossRef
18.
Zurück zum Zitat Li, X.J., Cheng, G.A., Xue, W.B., Zheng, R.T., Cheng, Y.J.: Wear and corrosion resistant coatings formed by microarc oxidation on TiAl alloy. Mater. Chem. Phys. 107, 148–152 (2008)CrossRef Li, X.J., Cheng, G.A., Xue, W.B., Zheng, R.T., Cheng, Y.J.: Wear and corrosion resistant coatings formed by microarc oxidation on TiAl alloy. Mater. Chem. Phys. 107, 148–152 (2008)CrossRef
19.
Zurück zum Zitat Rastkar, A., Bell, T.: Characterization and tribological performance of oxide layers on a gamma based titanium aluminide. Wear 258, 1616–1624 (2005)CrossRef Rastkar, A., Bell, T.: Characterization and tribological performance of oxide layers on a gamma based titanium aluminide. Wear 258, 1616–1624 (2005)CrossRef
20.
Zurück zum Zitat La, P., Xue, Q., Liu, W.: Effects of boron doping on tribological properties of Ni3Al-Cr7C3 coatings under dry sliding. Wear 249, 93–99 (2001)CrossRef La, P., Xue, Q., Liu, W.: Effects of boron doping on tribological properties of Ni3Al-Cr7C3 coatings under dry sliding. Wear 249, 93–99 (2001)CrossRef
21.
Zurück zum Zitat Shi, X., Wang, M., Zhai, W., Zhu, Z., Xu, Z., Zhang, Q., et al.: Friction and wear behavior of NiAl-10wt.% Ti3SiC2 composites. Wear 303, 9–20 (2013) Shi, X., Wang, M., Zhai, W., Zhu, Z., Xu, Z., Zhang, Q., et al.: Friction and wear behavior of NiAl-10wt.% Ti3SiC2 composites. Wear 303, 9–20 (2013)
22.
Zurück zum Zitat Shi, X., Wang, M., Zhai, W., Xu, Z., Zhang, Q., Chen, Y.: Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites. Mater. Design 45, 179–189 (2012)CrossRef Shi, X., Wang, M., Zhai, W., Xu, Z., Zhang, Q., Chen, Y.: Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites. Mater. Design 45, 179–189 (2012)CrossRef
23.
Zurück zum Zitat Sun, T., Wang, Q., Sun, D., Wu, G., Na, Y.: Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite. Wear 268, 693–699 (2010)CrossRef Sun, T., Wang, Q., Sun, D., Wu, G., Na, Y.: Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite. Wear 268, 693–699 (2010)CrossRef
24.
Zurück zum Zitat Zhou, Y., Sun, D.-L., Jiang, D.-P., Han, X.-L., Wang, Q., Wu, G.-H.: Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process. Mater. Charact. 80, 28–35 (2013)CrossRef Zhou, Y., Sun, D.-L., Jiang, D.-P., Han, X.-L., Wang, Q., Wu, G.-H.: Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process. Mater. Charact. 80, 28–35 (2013)CrossRef
25.
Zurück zum Zitat Lin, Z., Zhuo, M., Zhou, Y., Li, M., Wang, J.: Microstructural characterization of layered ternary Ti2AlC. Acta Mater. 54, 1009–1015 (2006)CrossRef Lin, Z., Zhuo, M., Zhou, Y., Li, M., Wang, J.: Microstructural characterization of layered ternary Ti2AlC. Acta Mater. 54, 1009–1015 (2006)CrossRef
26.
Zurück zum Zitat Barsoum, M., El-Raghy, T., Ali, M.: Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0. 5N0. 5. Metall. Mater. Trans. A 31, 1857–1865 (2000)CrossRef Barsoum, M., El-Raghy, T., Ali, M.: Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0. 5N0. 5. Metall. Mater. Trans. A 31, 1857–1865 (2000)CrossRef
27.
Zurück zum Zitat Kulkarni, S.R., Wu, A.V.: Synthesis of Ti2AlC by spark plasma sintering of TiAl–carbon nanotube powder mixture. J. Alloy. Compd. 490, 155–159 (2010)CrossRef Kulkarni, S.R., Wu, A.V.: Synthesis of Ti2AlC by spark plasma sintering of TiAl–carbon nanotube powder mixture. J. Alloy. Compd. 490, 155–159 (2010)CrossRef
28.
Zurück zum Zitat Shu, S., Qiu, F., Lü, S., Jin, S., Jiang, Q.: Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction. Mater. Sci. Eng. A 539, 344–348 (2012)CrossRef Shu, S., Qiu, F., Lü, S., Jin, S., Jiang, Q.: Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction. Mater. Sci. Eng. A 539, 344–348 (2012)CrossRef
29.
Zurück zum Zitat Barsoum, M.W., El-Raghy, T.: Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J. Am. Ceram. Soc. 79, 1953–1956 (1996)CrossRef Barsoum, M.W., El-Raghy, T.: Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J. Am. Ceram. Soc. 79, 1953–1956 (1996)CrossRef
30.
Zurück zum Zitat Mei, B., Miyamoto, Y.: Investigation of TiAl/Ti2AlC composites prepared by spark plasma sintering. Mater. Chem. Phys. 75, 291–295 (2002)CrossRef Mei, B., Miyamoto, Y.: Investigation of TiAl/Ti2AlC composites prepared by spark plasma sintering. Mater. Chem. Phys. 75, 291–295 (2002)CrossRef
31.
Zurück zum Zitat Shu, S., Qiu, F., Jin, S., Lu, J., Jiang, Q.: Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti-Al-Nb-C system. Mater. Design 32, 5061–5065 (2011)CrossRef Shu, S., Qiu, F., Jin, S., Lu, J., Jiang, Q.: Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti-Al-Nb-C system. Mater. Design 32, 5061–5065 (2011)CrossRef
32.
Zurück zum Zitat Appel, F., Wagner, R.: Microstructure and deformation of two-phase γ-titanium aluminides. Mater. Sci. Eng. R 22, 187–268 (1998)CrossRef Appel, F., Wagner, R.: Microstructure and deformation of two-phase γ-titanium aluminides. Mater. Sci. Eng. R 22, 187–268 (1998)CrossRef
33.
Zurück zum Zitat Yang, J., La, P., Liu, W., Xue, Q.: Tribological properties of FeAl intermetallics under dry sliding. Wear 257, 104–109 (2004)CrossRef Yang, J., La, P., Liu, W., Xue, Q.: Tribological properties of FeAl intermetallics under dry sliding. Wear 257, 104–109 (2004)CrossRef
34.
Zurück zum Zitat Riahi, A., Alpas, A.: The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites. Wear 251, 1396–1407 (2001)CrossRef Riahi, A., Alpas, A.: The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites. Wear 251, 1396–1407 (2001)CrossRef
35.
Zurück zum Zitat Hogmark, S., Jacobson, S.: Metals Handbook. 10th ed: ASM International, Materials Park (1990) Hogmark, S., Jacobson, S.: Metals Handbook. 10th ed: ASM International, Materials Park (1990)
Metadaten
Titel
Dry-Sliding Tribological Properties of TiAl/Ti2AlC Composites
verfasst von
Jun Cheng
Fei Li
Licai Fu
Zhuhui Qiao
Jun Yang
Weimin Liu
Publikationsdatum
01.02.2014
Verlag
Springer US
Erschienen in
Tribology Letters / Ausgabe 2/2014
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-013-0284-x

Weitere Artikel der Ausgabe 2/2014

Tribology Letters 2/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.