Skip to main content
Erschienen in: Tribology Letters 3/2014

01.03.2014 | Original Paper

Effect of Ag and Ti3SiC2 on Tribological Properties of TiAl Matrix Self-lubricating Composites at Room and Increased Temperatures

verfasst von: Zengshi Xu, Xiaoliang Shi, Mang Wang, Wenzheng Zhai, Jie Yao, Siyuan Song, Qiaoxin Zhang

Erschienen in: Tribology Letters | Ausgabe 3/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Dry sliding tribological properties of TiAl matrix self-lubricating composites (TMSC) containing Ag, Ti3SiC2, Ag and Ti3SiC2 were investigated from 25 to 800 °C under ball-on-disk test conditions against Si3N4 counterface under the same conditions of 10 N-0.234 m/s. The results indicated that the tribological properties were strongly dependent on the lubricant additives. TMSC with the addition of Ag and Ti3SiC2 (TAT) exhibited the lower friction coefficients (0.32–0.43) and less wear rates (1.23–4.13 × 10−4 mm3 N−1m−1) in the wide temperature range of 25–800 °C. The excellent tribological properties of TAT over the wide temperature range were attributed to the synergetic effect of Ag and Ti3SiC2 lubricants, silver diffusion forming a rich-silver smooth tribo-film on the frictional surface of TAT at low and moderate temperatures from 25 to 400 °C, while Ti3SiC2 oxidation reaction forming rich-oxide tribo-film on the worn surface of TAT at higher temperatures of 600 and 800 °C.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Kawabata, T., Fukai, T., Izumi, O.: Effect of ternary additions on mechanical properties of TiAl. Acta Mater. 46, 2185–2194 (1998)CrossRef Kawabata, T., Fukai, T., Izumi, O.: Effect of ternary additions on mechanical properties of TiAl. Acta Mater. 46, 2185–2194 (1998)CrossRef
2.
Zurück zum Zitat Zollinger, J., Lapin, J., Daloz, D., Combeau, H.: Influence of oxygen on solidification behaviour of cast TiAl-based alloys. Intermetallics 15, 1343–1350 (2007)CrossRef Zollinger, J., Lapin, J., Daloz, D., Combeau, H.: Influence of oxygen on solidification behaviour of cast TiAl-based alloys. Intermetallics 15, 1343–1350 (2007)CrossRef
3.
Zurück zum Zitat Wu, X.H.: Review of alloy and process development of TiAl alloys. Intermetallics 14, 1114–1122 (2006)CrossRef Wu, X.H.: Review of alloy and process development of TiAl alloys. Intermetallics 14, 1114–1122 (2006)CrossRef
4.
Zurück zum Zitat Xiong, D.S.: Effects of MoS2 on mechanical and tribological properties of NiCr-based alloys. Trans. Nonferr. Met. Soc. Chin. 10, 328–331 (1997) Xiong, D.S.: Effects of MoS2 on mechanical and tribological properties of NiCr-based alloys. Trans. Nonferr. Met. Soc. Chin. 10, 328–331 (1997)
5.
Zurück zum Zitat Donnet, C., Erdemir, A.: Historical developments and new trends in tribological and solid lubricant coatings. Surf. Coat. Technol. 180–181, 76–84 (2004)CrossRef Donnet, C., Erdemir, A.: Historical developments and new trends in tribological and solid lubricant coatings. Surf. Coat. Technol. 180–181, 76–84 (2004)CrossRef
6.
Zurück zum Zitat Xiong, D.S., Wan, Y., Lin, J.M., Zhu, H.G.: Tribological property and high temperature oxidation of Ni-based alloy. Trans. Nonferr. Met. Soc. Chin. 15, 162–166 (2005) Xiong, D.S., Wan, Y., Lin, J.M., Zhu, H.G.: Tribological property and high temperature oxidation of Ni-based alloy. Trans. Nonferr. Met. Soc. Chin. 15, 162–166 (2005)
7.
Zurück zum Zitat Liu, R.T., Li, X.B., Xiong, D.S., Cheng, S.H.: Study on the tribological characteristics of a high-temperature self-lubricating nickel-base material. J. Central South Univ. Technol. 31, 260–263 (2000) Liu, R.T., Li, X.B., Xiong, D.S., Cheng, S.H.: Study on the tribological characteristics of a high-temperature self-lubricating nickel-base material. J. Central South Univ. Technol. 31, 260–263 (2000)
8.
Zurück zum Zitat Dellacorte, C., Sliney, H.E.: Tribological Properties of PM212: A High-Temperature, Self-lubricating, Powder Metallurgy Composite. NASA, TM-102355 (1990) Dellacorte, C., Sliney, H.E.: Tribological Properties of PM212: A High-Temperature, Self-lubricating, Powder Metallurgy Composite. NASA, TM-102355 (1990)
9.
Zurück zum Zitat Muratore, C., Voevodin, A.A.: Chameleon coatings: adaptive surfaces to reduce friction and wear in extreme environments. Annu. Rev. Mater. Res. 39, 297–324 (2009)CrossRef Muratore, C., Voevodin, A.A.: Chameleon coatings: adaptive surfaces to reduce friction and wear in extreme environments. Annu. Rev. Mater. Res. 39, 297–324 (2009)CrossRef
10.
Zurück zum Zitat Aouadi, S.M., Luster, B., Kohli, P., Muratore, C., Voevodin, A.A.: Progress in the development of adaptive nitride-based coatings for high temperature tribological applications. Surf. Coat. Technol. 204, 962–968 (2009)CrossRef Aouadi, S.M., Luster, B., Kohli, P., Muratore, C., Voevodin, A.A.: Progress in the development of adaptive nitride-based coatings for high temperature tribological applications. Surf. Coat. Technol. 204, 962–968 (2009)CrossRef
11.
Zurück zum Zitat Sliney, H.E.: The use of silver in self-lubricating coatings for extreme temperatures. ASLE Trans. 29, 370–376 (1986)CrossRef Sliney, H.E.: The use of silver in self-lubricating coatings for extreme temperatures. ASLE Trans. 29, 370–376 (1986)CrossRef
12.
Zurück zum Zitat Hu, J.J., Muratore, C., Voevodin, A.A.: Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings. Compos. Sci. Technol. 67, 336–347 (2007)CrossRef Hu, J.J., Muratore, C., Voevodin, A.A.: Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings. Compos. Sci. Technol. 67, 336–347 (2007)CrossRef
13.
Zurück zum Zitat Aouadi, S.M., Paudel, Y., Luster, B., Stadler, S., Kohli, P., Muratore, C., Hager, C., Voevodin, A.A.: Adaptive Mo2N/MoS2/Ag tribological nanocomposite coatings for aerospace applications. Tribol. Lett. 29, 95–103 (2008)CrossRef Aouadi, S.M., Paudel, Y., Luster, B., Stadler, S., Kohli, P., Muratore, C., Hager, C., Voevodin, A.A.: Adaptive Mo2N/MoS2/Ag tribological nanocomposite coatings for aerospace applications. Tribol. Lett. 29, 95–103 (2008)CrossRef
14.
Zurück zum Zitat Kutschej, K., Mitterer, C., Mulligan, C.P., Gall, D.: High-temperature tribological behavior of CrN-Ag self-lubricating coatings. Adv. Eng. Mater. 8, 1125–1129 (2006)CrossRef Kutschej, K., Mitterer, C., Mulligan, C.P., Gall, D.: High-temperature tribological behavior of CrN-Ag self-lubricating coatings. Adv. Eng. Mater. 8, 1125–1129 (2006)CrossRef
15.
Zurück zum Zitat Mulligan, C.P., Gall, D.: CrN-Ag self-lubricating hard coatings. Surf. Coat. Technol. 200, 1495–1500 (2005)CrossRef Mulligan, C.P., Gall, D.: CrN-Ag self-lubricating hard coatings. Surf. Coat. Technol. 200, 1495–1500 (2005)CrossRef
16.
Zurück zum Zitat Jin, Y., Kato, K., Umehara, N.: Tribological properties of self-lubricating CMC/Al2O3 pairs at high temperature in air. Tribol. Lett. 4, 243–250 (1998)CrossRef Jin, Y., Kato, K., Umehara, N.: Tribological properties of self-lubricating CMC/Al2O3 pairs at high temperature in air. Tribol. Lett. 4, 243–250 (1998)CrossRef
17.
Zurück zum Zitat Muratore, C., Voevodin, A.A., Hu, J.J., Jones, J.G., Zabinski, J.S.: Growth and characterization of nanocomposite yttria-stabilized zirconia with Ag and Mo. Surf. Coat. Technol. 200, 1549–1554 (2005)CrossRef Muratore, C., Voevodin, A.A., Hu, J.J., Jones, J.G., Zabinski, J.S.: Growth and characterization of nanocomposite yttria-stabilized zirconia with Ag and Mo. Surf. Coat. Technol. 200, 1549–1554 (2005)CrossRef
18.
Zurück zum Zitat Kuk, E., Kim, G., Lee, C.: Effects of solid lubricant content and size on the tribology of NiCr-Cr2O3-Ag composites. J. Ceram. Process. Res. 6, 95–100 (2005) Kuk, E., Kim, G., Lee, C.: Effects of solid lubricant content and size on the tribology of NiCr-Cr2O3-Ag composites. J. Ceram. Process. Res. 6, 95–100 (2005)
19.
Zurück zum Zitat Guptaa, S., Barsoum, M.W.: On the tribology of the MAX phases and their composites during dry sliding: a review. Wear 271, 1878–1894 (2011)CrossRef Guptaa, S., Barsoum, M.W.: On the tribology of the MAX phases and their composites during dry sliding: a review. Wear 271, 1878–1894 (2011)CrossRef
20.
Zurück zum Zitat Ren, S., Meng, J., Lu, J., Yang, S.: Tribological behavior of Ti3SiC2 sliding against Ni-based alloys at elevated temperatures. Tribol. Lett. 31, 129–137 (2008)CrossRef Ren, S., Meng, J., Lu, J., Yang, S.: Tribological behavior of Ti3SiC2 sliding against Ni-based alloys at elevated temperatures. Tribol. Lett. 31, 129–137 (2008)CrossRef
21.
Zurück zum Zitat Gupta, S., Filimonov, D., Zaitsev, V., Palanisamy, T., Barsoum, M.W.: Ambient and 550°C tribological behavior of select MAX phases against Ni-based Superalloys. Wear 264, 270–278 (2008)CrossRef Gupta, S., Filimonov, D., Zaitsev, V., Palanisamy, T., Barsoum, M.W.: Ambient and 550°C tribological behavior of select MAX phases against Ni-based Superalloys. Wear 264, 270–278 (2008)CrossRef
22.
Zurück zum Zitat Gupta, S., Filimonov, D., Palanisamy, T., El-Raghy, T., Barsoum, M.W.: Ta2AlC and Cr2AlC Ag-based composites-New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina. Wear 262, 1479–1489 (2007)CrossRef Gupta, S., Filimonov, D., Palanisamy, T., El-Raghy, T., Barsoum, M.W.: Ta2AlC and Cr2AlC Ag-based composites-New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina. Wear 262, 1479–1489 (2007)CrossRef
23.
Zurück zum Zitat Gupta, S., Filimonov, D., Zaitsev, V., Palanisamy, T., El-Raghy, T., Barsoum, M.W.: Study of tribofilms formed during dry sliding of Ta2AlC/Ag or Cr2AlC/Ag composites against Ni-based superalloys and Al2O3. Wear 267, 1490–1500 (2009)CrossRef Gupta, S., Filimonov, D., Zaitsev, V., Palanisamy, T., El-Raghy, T., Barsoum, M.W.: Study of tribofilms formed during dry sliding of Ta2AlC/Ag or Cr2AlC/Ag composites against Ni-based superalloys and Al2O3. Wear 267, 1490–1500 (2009)CrossRef
24.
Zurück zum Zitat Peng, M.C., Shi, X.L., Zhu, Z.W., Wang, M., Zhang, Q.X.: Facile synthesis of Ti3SiC2 powder by high energy ball-milling and vacuum pressureless heat-treating process from Ti-TiC-SiC-Al powder mixtures. Ceram. Int. 38, 2027–2033 (2012)CrossRef Peng, M.C., Shi, X.L., Zhu, Z.W., Wang, M., Zhang, Q.X.: Facile synthesis of Ti3SiC2 powder by high energy ball-milling and vacuum pressureless heat-treating process from Ti-TiC-SiC-Al powder mixtures. Ceram. Int. 38, 2027–2033 (2012)CrossRef
25.
Zurück zum Zitat Peng, C.Q., Huang, B.Y., He, Y.H.: Effects of alloying on properties of TiAl-based alloys and mechanisms. Trans. Nonferr. Met. Soc. Chin. 8, 11–16 (1998) Peng, C.Q., Huang, B.Y., He, Y.H.: Effects of alloying on properties of TiAl-based alloys and mechanisms. Trans. Nonferr. Met. Soc. Chin. 8, 11–16 (1998)
26.
Zurück zum Zitat American Society for Testing and Materials: Standard test method for Vickers hardness of metallic materials. ASTM E92–82, e2 (2003) American Society for Testing and Materials: Standard test method for Vickers hardness of metallic materials. ASTM E92–82, e2 (2003)
27.
Zurück zum Zitat American Society for Testing and Materials: Standard test methods for density of compacted or sintered powder metallurgy (PM) products using Archimedes’ principle. ASTM B962-08 (2008) American Society for Testing and Materials: Standard test methods for density of compacted or sintered powder metallurgy (PM) products using Archimedes’ principle. ASTM B962-08 (2008)
28.
Zurück zum Zitat American Society for Testing and Materials: Standard test method for wear testing with a pin-on-disk apparatus. ASTM G99-95 (1995) American Society for Testing and Materials: Standard test method for wear testing with a pin-on-disk apparatus. ASTM G99-95 (1995)
29.
Zurück zum Zitat Zhu, S.Y., Bi, Q.L., Niu, M.Y., Yang, J., Liu, W.M.: Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures. Wear 274–275, 423–434 (2012)CrossRef Zhu, S.Y., Bi, Q.L., Niu, M.Y., Yang, J., Liu, W.M.: Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures. Wear 274–275, 423–434 (2012)CrossRef
30.
Zurück zum Zitat Cheng, J., Yang, J., Zhang, X.H., Zhong, H., Ma, J.Q., Li, F., Fu, L.C., Bi, Q.L., Li, J.S., Liu, W.M.: High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics. Intermetallics 31, 120–126 (2012)CrossRef Cheng, J., Yang, J., Zhang, X.H., Zhong, H., Ma, J.Q., Li, F., Fu, L.C., Bi, Q.L., Li, J.S., Liu, W.M.: High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics. Intermetallics 31, 120–126 (2012)CrossRef
31.
Zurück zum Zitat Tyagi, R., Xiong, D.S., Li, J.L.: Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites. Wear 270, 423–430 (2011)CrossRef Tyagi, R., Xiong, D.S., Li, J.L.: Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites. Wear 270, 423–430 (2011)CrossRef
32.
Zurück zum Zitat Huang, Z.Y., Zhai, H.Z., Guan, M.L., Liu, X., Ai, M., Zhou, Y.: Oxide-film-dependent tribological behaviors of Ti3SiC2. Wear 262, 1079–1085 (2007)CrossRef Huang, Z.Y., Zhai, H.Z., Guan, M.L., Liu, X., Ai, M., Zhou, Y.: Oxide-film-dependent tribological behaviors of Ti3SiC2. Wear 262, 1079–1085 (2007)CrossRef
33.
Zurück zum Zitat Woydt, M.: Tribological characteristics of polycrystalline Magneli-type titanium dioxides. Tribol. Lett. 8, 117–130 (2000)CrossRef Woydt, M.: Tribological characteristics of polycrystalline Magneli-type titanium dioxides. Tribol. Lett. 8, 117–130 (2000)CrossRef
34.
Zurück zum Zitat Woydt, M., Skopp, A., Habig, K.H.: Dry friction and wear of self-mated sliding couples of SiC-TiC and Si3N4-TiN. Wear 148, 377–394 (1991)CrossRef Woydt, M., Skopp, A., Habig, K.H.: Dry friction and wear of self-mated sliding couples of SiC-TiC and Si3N4-TiN. Wear 148, 377–394 (1991)CrossRef
35.
Zurück zum Zitat Zhu, S.Y., Bi, Q.L., Yang, J., Liu, W.M.: Tribological property of Ni3Al matrix composites with addition of BaMoO4. Tribol. Lett. 43, 55–63 (2011)CrossRef Zhu, S.Y., Bi, Q.L., Yang, J., Liu, W.M.: Tribological property of Ni3Al matrix composites with addition of BaMoO4. Tribol. Lett. 43, 55–63 (2011)CrossRef
Metadaten
Titel
Effect of Ag and Ti3SiC2 on Tribological Properties of TiAl Matrix Self-lubricating Composites at Room and Increased Temperatures
verfasst von
Zengshi Xu
Xiaoliang Shi
Mang Wang
Wenzheng Zhai
Jie Yao
Siyuan Song
Qiaoxin Zhang
Publikationsdatum
01.03.2014
Verlag
Springer US
Erschienen in
Tribology Letters / Ausgabe 3/2014
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-014-0299-y

Weitere Artikel der Ausgabe 3/2014

Tribology Letters 3/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.