Skip to main content
Erschienen in: Experimental Mechanics 7/2012

01.09.2012

Membrane Curvatures and Stress-strain Full Fields of Axisymmetric Bulge Tests from 3D-DIC Measurements. Theory and Validation on Virtual and Experimental results

verfasst von: G. Machado, D. Favier, G. Chagnon

Erschienen in: Experimental Mechanics | Ausgabe 7/2012

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The bulge test is mostly used to analyze equibiaxial tensile stress state at the pole of inflated isotropic membranes. Three-dimensional digital image correlation (3D-DIC) technique allows the determination of three-dimensional surface displacements and strain fields. In this paper, a method is proposed to determine also the membrane stress tensor fields for in-plane isotropic materials, independently of any constitutive equation. Stress-strain state is then known at any surface point which enriches greatly experimental data deduced from the axisymmetric bulge tests. Our method consists, first in calculating from the 3D-DIC experimental data the membrane curvature tensor at each surface point of the bulge specimen. Then, curvature tensor fields are used to investigate axisymmetry of the test. Finally in the axisymmetric case, membrane stress tensor fields are determined from meridional and circumferential curvatures combined with the measurement of the inflating pressure. Our method is first validated for virtual 3D-DIC data, obtained by numerical simulation of a bulge test using a hyperelastic material model. Afterward, the method is applied to an experimental bulge test performed using as material a silicone elastomer. The stress-strain fields which are obtained using the proposed method are compared with results of the finite element simulation of this overall bulge test using a neo-Hookean model fitted on uniaxial and equibiaxial tensile tests.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Zurück zum Zitat Avril S, Bonnet M, Bretelle A, Grediac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E et al (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48(4):381–402CrossRef Avril S, Bonnet M, Bretelle A, Grediac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E et al (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48(4):381–402CrossRef
2.
Zurück zum Zitat Treloar LRG (1944) Strains in an inflated rubber sheet and the mechanism of bursting. Trans Inst Rubber Ind 19:201–212 Treloar LRG (1944) Strains in an inflated rubber sheet and the mechanism of bursting. Trans Inst Rubber Ind 19:201–212
3.
Zurück zum Zitat Brown WF, Thompson F (1949) Strength and failure characteristics of metal membranes in circular bulging. Trans Am Soc Mech Eng 71:575–585 Brown WF, Thompson F (1949) Strength and failure characteristics of metal membranes in circular bulging. Trans Am Soc Mech Eng 71:575–585
4.
Zurück zum Zitat Tsakalakos T (1981) The bulge test—A comparison of theory and experiment for isotropic and anisotropic films. Thin Solid Films 75:293–305CrossRef Tsakalakos T (1981) The bulge test—A comparison of theory and experiment for isotropic and anisotropic films. Thin Solid Films 75:293–305CrossRef
5.
Zurück zum Zitat Mitchell JS, Zorman CA, Kicher T, Roy S, Mehregany M (2003) Examination of bulge test for determining residual stress, Young’s modulus, and Poisson’s ratio of 3C-SiC thin films. J Aerosp Eng 16(2):46–54CrossRef Mitchell JS, Zorman CA, Kicher T, Roy S, Mehregany M (2003) Examination of bulge test for determining residual stress, Young’s modulus, and Poisson’s ratio of 3C-SiC thin films. J Aerosp Eng 16(2):46–54CrossRef
6.
Zurück zum Zitat Seshaiyer P, Hsu FPK, Shah AD, Kyriacou SK, Humphrey JD (2001) Multiaxial mechanical behavior of human saccular aneurysms. Comput Methods Biomech Biomed Eng 4(3):281–289CrossRef Seshaiyer P, Hsu FPK, Shah AD, Kyriacou SK, Humphrey JD (2001) Multiaxial mechanical behavior of human saccular aneurysms. Comput Methods Biomech Biomed Eng 4(3):281–289CrossRef
7.
Zurück zum Zitat Miller CE (1979) Determination of elastic parameters for human fetal membranes. J Rheol 23:57–78CrossRef Miller CE (1979) Determination of elastic parameters for human fetal membranes. J Rheol 23:57–78CrossRef
8.
Zurück zum Zitat Kriewall T, Akkas N, Bylski D, Melvin J, Work B (1983) Mechanical-behavior of fetal dura mater under large axisymmetric inflation. J Biomech Eng - T ASME 105(23):71–76CrossRef Kriewall T, Akkas N, Bylski D, Melvin J, Work B (1983) Mechanical-behavior of fetal dura mater under large axisymmetric inflation. J Biomech Eng - T ASME 105(23):71–76CrossRef
9.
Zurück zum Zitat Selby JC, Shannon MA (2007) Apparatus for measuring the finite load-deformation behavior of a sheet of epithelial cells cultured on a mesoscopic freestanding elastomer membrane. Rev Sci Instrum 78(9):094301CrossRef Selby JC, Shannon MA (2007) Apparatus for measuring the finite load-deformation behavior of a sheet of epithelial cells cultured on a mesoscopic freestanding elastomer membrane. Rev Sci Instrum 78(9):094301CrossRef
10.
Zurück zum Zitat Grolleau V, Gary G, Mohr D (2008) Biaxial testing of sheet materials at high strain rates using viscoelastic bars. Exp Mech 48:293–306CrossRef Grolleau V, Gary G, Mohr D (2008) Biaxial testing of sheet materials at high strain rates using viscoelastic bars. Exp Mech 48:293–306CrossRef
11.
Zurück zum Zitat Adkins JE, Rivlin RS (1952) Large elastic deformation of isotropic materials. IX. The deformation of thin shells. Philos Trans R Soc A244:505–532MathSciNet Adkins JE, Rivlin RS (1952) Large elastic deformation of isotropic materials. IX. The deformation of thin shells. Philos Trans R Soc A244:505–532MathSciNet
12.
Zurück zum Zitat Hill R (1950) A theory of the plastic bulging of a metal diaphragm by lateral pressure. Philos Mag 41:1133–1142MathSciNetMATH Hill R (1950) A theory of the plastic bulging of a metal diaphragm by lateral pressure. Philos Mag 41:1133–1142MathSciNetMATH
14.
Zurück zum Zitat Meunier L, Chagnon G, Favier D, Orgéas L, Vacher P (2008) Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber. Polym Test 27:765–777CrossRef Meunier L, Chagnon G, Favier D, Orgéas L, Vacher P (2008) Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber. Polym Test 27:765–777CrossRef
15.
Zurück zum Zitat Sasso M, Palmieri G, Chiappini G, Amodio D (2008) Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods. Polym Test 27:995–1004CrossRef Sasso M, Palmieri G, Chiappini G, Amodio D (2008) Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods. Polym Test 27:995–1004CrossRef
16.
Zurück zum Zitat Grolleau V, Louche H, Delobelle V, Penin A, Rio G, Liu Y, Favier D (2011) Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates. Scr Mater 65(4):347–350CrossRef Grolleau V, Louche H, Delobelle V, Penin A, Rio G, Liu Y, Favier D (2011) Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates. Scr Mater 65(4):347–350CrossRef
17.
Zurück zum Zitat Dudderar T, Koch F, Doerries E (1977) Measurement of the shapes of foil bulge-test samples. Exp Mech 17:133–140CrossRef Dudderar T, Koch F, Doerries E (1977) Measurement of the shapes of foil bulge-test samples. Exp Mech 17:133–140CrossRef
18.
Zurück zum Zitat Wineman AS (1976) Large axisymmetric inflation of a nonlinear viscoelastic membrane by lateral pressure. Trans Soc Rheol 20(23):203 1976MathSciNetMATHCrossRef Wineman AS (1976) Large axisymmetric inflation of a nonlinear viscoelastic membrane by lateral pressure. Trans Soc Rheol 20(23):203 1976MathSciNetMATHCrossRef
19.
Zurück zum Zitat Yang W, Feng W (1970) On axisymmetrical deformations of nonlinear membranes. J Appl Mech 37:1002–1011MATHCrossRef Yang W, Feng W (1970) On axisymmetrical deformations of nonlinear membranes. J Appl Mech 37:1002–1011MATHCrossRef
20.
Zurück zum Zitat Klingbeil W, Shield R (1964) Some numerical investigations on empirical strain energy functions in the large axisymmetric extensions of rubber membranes. Z Angew Math Phys 15:608–629CrossRef Klingbeil W, Shield R (1964) Some numerical investigations on empirical strain energy functions in the large axisymmetric extensions of rubber membranes. Z Angew Math Phys 15:608–629CrossRef
21.
Zurück zum Zitat Wineman AS (1978) On axisymmetric deformations of nonlinear viscoelastic membranes. J Non-Newton Fluid Mech 4(23):249–260MATHCrossRef Wineman AS (1978) On axisymmetric deformations of nonlinear viscoelastic membranes. J Non-Newton Fluid Mech 4(23):249–260MATHCrossRef
22.
Zurück zum Zitat Feng W (1992) Viscoelastic behavior of elastomeric membranes. J Appl Mech 59:29–34CrossRef Feng W (1992) Viscoelastic behavior of elastomeric membranes. J Appl Mech 59:29–34CrossRef
23.
Zurück zum Zitat Hsu F, Liu A, Downs J, Rigamonti D, Humphrey J (1995) A triplane video-based experimental system for studying axisymmetrically inflated biomembranes. IEEE Trans Bio-Med Eng 42:442–450CrossRef Hsu F, Liu A, Downs J, Rigamonti D, Humphrey J (1995) A triplane video-based experimental system for studying axisymmetrically inflated biomembranes. IEEE Trans Bio-Med Eng 42:442–450CrossRef
24.
Zurück zum Zitat Luo P, Chao Y, Sutton M, Peters W (1993) Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision. Exp Mech 33:123–132CrossRef Luo P, Chao Y, Sutton M, Peters W (1993) Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision. Exp Mech 33:123–132CrossRef
25.
Zurück zum Zitat Sutton MA (2008) Digital image correlation for shape and deformation measurements. In: Springer handbook of experimental solid mechanics - Part C, pp. 565–600 Sutton MA (2008) Digital image correlation for shape and deformation measurements. In: Springer handbook of experimental solid mechanics - Part C, pp. 565–600
26.
Zurück zum Zitat Sutton MA, Orteu J-J, Schreier HW (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York. doi:10.1007/978-0-387-78747-3 Sutton MA, Orteu J-J, Schreier HW (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York. doi:10.​1007/​978-0-387-78747-3
27.
Zurück zum Zitat Orteu JJ (2009) 3-D computer vision in experimental mechanics. Opt Lasers Eng 47(3–4):282–291CrossRef Orteu JJ (2009) 3-D computer vision in experimental mechanics. Opt Lasers Eng 47(3–4):282–291CrossRef
28.
29.
Zurück zum Zitat Schreier H, Sutton M (2002) Systematic errors in digital image correlation due to undermatched subset shape functions. Exp Mech 42:303–310CrossRef Schreier H, Sutton M (2002) Systematic errors in digital image correlation due to undermatched subset shape functions. Exp Mech 42:303–310CrossRef
30.
Zurück zum Zitat Carmo MP (1976) Differential geometry of curves and surfaces. Prentice-Hall Inc, Englewood Cliffs, New JerseyMATH Carmo MP (1976) Differential geometry of curves and surfaces. Prentice-Hall Inc, Englewood Cliffs, New JerseyMATH
32.
Zurück zum Zitat Toponogov VA (2006) Differential geometry of curves and surfaces: a concise guide. Birkhäuser Boston Toponogov VA (2006) Differential geometry of curves and surfaces: a concise guide. Birkhäuser Boston
33.
Zurück zum Zitat Green A, Adkins J (1970) Large elastic deformation, 2nd edition. Clarendon Press, Oxford Green A, Adkins J (1970) Large elastic deformation, 2nd edition. Clarendon Press, Oxford
34.
Zurück zum Zitat Humphrey JD (1998) Computer methods in membrane biomechanics. Comput Methods Biomech Biomed Eng 1:171–210CrossRef Humphrey JD (1998) Computer methods in membrane biomechanics. Comput Methods Biomech Biomed Eng 1:171–210CrossRef
35.
36.
Zurück zum Zitat Kyriacou SK, Shah AD, Humphrey JD (1997) Inverse finite element characterization of nonlinear hyperelastic membranes. J Appl Mech 65:257–262CrossRef Kyriacou SK, Shah AD, Humphrey JD (1997) Inverse finite element characterization of nonlinear hyperelastic membranes. J Appl Mech 65:257–262CrossRef
37.
Zurück zum Zitat Garcia D (2010) Robust smoothing of gridded data in one and higher dimensions with missing values. Comput Statist Data Anal 54(4):1167–1178MathSciNetMATHCrossRef Garcia D (2010) Robust smoothing of gridded data in one and higher dimensions with missing values. Comput Statist Data Anal 54(4):1167–1178MathSciNetMATHCrossRef
38.
Zurück zum Zitat Orteu J-J, Bugarin F, Harvent J, Robert L, Velay V (2010) Multiple-camera instrumentation of a single point incremental forming process pilot for shape and 3D displacement measurements: methodology and results. Exp Mech 51:1–15 Orteu J-J, Bugarin F, Harvent J, Robert L, Velay V (2010) Multiple-camera instrumentation of a single point incremental forming process pilot for shape and 3D displacement measurements: methodology and results. Exp Mech 51:1–15
39.
Zurück zum Zitat Machado G, Chagnon G, Favier D (2010) Analysis of the isotropic models of the mullins effect based on filled silicone rubber experimental results. Mech Mater 42(9):841–851CrossRef Machado G, Chagnon G, Favier D (2010) Analysis of the isotropic models of the mullins effect based on filled silicone rubber experimental results. Mech Mater 42(9):841–851CrossRef
40.
Zurück zum Zitat Mullins L (1969) Softening of rubber by deformation. Rubber Chem Technol 42:339–362CrossRef Mullins L (1969) Softening of rubber by deformation. Rubber Chem Technol 42:339–362CrossRef
41.
Zurück zum Zitat Treloar LRG (1943) The elasticity of a network of long chain molecules (I and II). Trans Faraday Soc 39:36–64; 241–246CrossRef Treloar LRG (1943) The elasticity of a network of long chain molecules (I and II). Trans Faraday Soc 39:36–64; 241–246CrossRef
42.
Zurück zum Zitat Guélon T, Toussaint E, Le Cam, J-B, Promma N, Grédiac M (2009) A new characterisation method for rubber. Polym Test 28(7):715–723CrossRef Guélon T, Toussaint E, Le Cam, J-B, Promma N, Grédiac M (2009) A new characterisation method for rubber. Polym Test 28(7):715–723CrossRef
Metadaten
Titel
Membrane Curvatures and Stress-strain Full Fields of Axisymmetric Bulge Tests from 3D-DIC Measurements. Theory and Validation on Virtual and Experimental results
verfasst von
G. Machado
D. Favier
G. Chagnon
Publikationsdatum
01.09.2012
Verlag
Springer US
Erschienen in
Experimental Mechanics / Ausgabe 7/2012
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI
https://doi.org/10.1007/s11340-011-9571-3

Weitere Artikel der Ausgabe 7/2012

Experimental Mechanics 7/2012 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.