Abstract
Over the last decade, there has been much effort to promote the management of e-waste in China. Policies have been affected to prohibit imports and to control pollution. Research has been conducted in laboratories and on large-scale industrial operations. A subsidy system to support sound e-waste recycling has been put in place. However, the handling of e-waste is still a concern in China and the issue remains unresolved. There has been relatively little work to follow up this issue or to interpret continuing problems from the perspective of sustainable development. This paper first provides a brief overview of conventional and emerging environmental pollution in Chinese “famous” e-waste dismantling areas, including Guiyu in Guangdong and Wenling in Zhejiang. Environmentalists have repeatedly proven that these areas are significantly polluted. Importing and backyard recycling are decreasing but are ongoing. Most importantly, no work is being done to treat or remediate the contaminated environmental media. The situation is exacerbated by the rising tide of e-waste generated by domestic update of various electronics. This study, therefore, employs a Sales Obsolescence Model approach to predict the generation of e-waste. When accounting for weight, approximately 8 million tons of e-waste will be generated domestically in 2015, of which around 50 % is ferrous metals, followed by miscellaneous plastic (30 %), copper metal and cables (8 %), aluminum (5 %), and others (7 %). Of this, 3.6 % will come from scrap PCBs and 0.2 % from lead CRT glass. While more and more end-of-life electronics have been collected and treated by formal or licensed recyclers in China in terms of our analysis, many of them only have dismantling and separation activities. Hazardous e-wastes, including those from PCBs, CRT glass, and brominated flame retardant (BFR) plastics, have become problematic and probably flow to small or backyard recyclers without environmentally sound management. Traditional technologies are still being used to recover precious metals—such as cyanide method of gold hydrometallurgy—from e-waste. While recovery rates of precious metals from e-waste are above 50 %, it has encountered some challenges from environmental considerations. Worse, many critical metals contained in e-waste are lost because the recovery rates are less than 1 %. On the other hand, this implies that there is opportunity to develop the urban mine of the critical metals from e-waste.
Similar content being viewed by others
References
Babbitt C, Kahhat R, Williams E, Babbitt G (2009) Evolution of product lifespan and implications for environmental assessment and management: a case study of personal computers in higher education. Environ Sci Technol 43(13):5106–5112
BAN (2002) Exporting harm: the high-tech trashing of Asia. Basel Action Network
Bi X, Thomas G, Jones K, Qu W, Sheng G, Martin F, Fu J (2007) Exposure of electronics dismantling workers to Polybrominated Diphenyl Ethers, Polychlorinated Biphenyls, and Organochlorine Pesticides in South China. Environ Sci Technol 41(16):5647–5653
Bi X, Li Z, Zhuang X, Han Z, Yang W (2011) High levels of antimony in dust from e-waste recycling in southeastern China. Sci Total Environ 409(23):5126–5128
Buchert M, Manhart A, Bleher D, Pingel D (2012) Recycling critical raw materials from waste electronic equipment. Öko-Institut eV, Freiburg
Chan J, Man Y, Wu S, Wong M (2013) Dietary intake of PBDEs of residents at two major electronic waste recycling sites in China. Sci Total Environ 463–464:1138–1146
Chancerel P, Meskers CEM, Hagelüken C, Rotter VS (2009) Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment. J Ind Ecol 13(5):791–810
Chen Y, Li J, Liu L, Zhao N (2012) Polybrominated diphenyl ethers fate in China: a review with an emphasis on environmental contamination levels, human exposure and regulation. J Environ Manag 113:22–30
Chi X, Streicher-Porter M, Wang M, Reuter M (2011) Informal electronic waste recycling: a sector review with special focus on China. Waste Manag 31:731–742
Chung S (2012) Projection of waste quantities: the case of e-waste of the People’s Republic of China. Waste Manag Res 30(11):1130–1137
Cryan J, Freegard K, Morrish L, Myles N (2010) Final report on the demonstration trials into Flat Panel Display recycling technologies. WRAP and Axion Consulting
Cui J, Zhang L (2008) Metallurgical recovery of metals from electronic waste: a review. J Hazard Mater 158(2–3):228–256
Cummings K, Nakano M, Omae K, Takeuchi K, Chonan T, Xiao Y, Harley R, Roggli V, Hebisawa A, Tallaksen R (2012) Indium Lung disease. Chest J 141(6):1512–1521
Duan H, Jia W, Li J (2010) The recycling of comminuted glass-fiber-reinforced resin from electronic waste. J Air Waste Manag Assoc 60(5):532–539
Duan H, Hou K, Li J, Zhu X (2011a) Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns. J Environ Manag 92(3):392–399
Duan H, Li J, Liu Y, Yamazaki N, Jiang W (2011b) Characterization and inventory of PCDD/Fs and PBDD/Fs emissions from the incineration of waste printed circuit board. Environ Sci Technol 45(15):6322–6328
Duan H, Li J, Liu Y, Yamazaki N, Jiang W (2012) Characterizing the emission of chlorinated/brominated dibenzo-p-dioxins and furans from low-temperature thermal processing of waste printed circuit board. Environ Pollut 161:185–191
Duan, H, Miller, T.R, Gregory, J, Kirchain R Quantitative Characterization of Transboundary Flows of Used Electronics: Analysis of Generation, Collection, and Export in the United States. December, 2013. Materials Systems Laboratory, MIT. http://www.step-initiative.org/tl_files/step/_documents/MIT-NCER%20US%20Used%20Electronics%20Flows%20Report%20-%20December%202013.pdf
Duan H, Miller T, Gregory J, Kirchain R (2014) Quantifying export flows of used electronics: advanced methods to resolve used goods within trade Data. Environ Sci Technol 48(6):3263–3271
Dwivedy M, Mittal RK (2010) Estimation of future outflows of e-waste in India. Waste Manag 30:483–491
EIA (2005) Consumer product mercury information sheet. Electronic Industries Alliance (EIA). http://www.eiae.org/chemicals/files/CEI_mercury.pdf
Eugster M, Duan H, Li J, Perera O, Potts J, Yang W (2008) Sustainable Electronics and Electrical Equipment for China and the World: A commodity chain sustainability analysis of key Chinese EEE product chains. IISD. http://www.iisd.org/pdf/2008/china_sd_eproducts.pdf
Grant K, Goldizen F, Sly P, Brune M, Neira M, van den Berg M, Norman R (2013) Health consequences of exposure to e-waste: a systematic review. Lancet Glob Health 1(6):350–361
Gregory J, Nadeau M, Kirchain R (2009) Evaluating the economic viability of a material recovery system: the case of cathode ray tube glass. Environ Sci Technol 43(24):9245–9251
Guo J, Guo J, Xu Z (2009) Recycling of non-metallic fractions from waste printed circuit boards: a review. J Hazard Mater 168(2–3):567–590
Guo J, Jiang Y, Hu X, Xu Z (2011) Volatile Organic Compounds and Metal Leaching from Composite Products Made from Fiberglass-Resin Portion of Printed Circuit Board Waste. Environ Sci Technol 46(2):1028–1034
Hagelüken C (2006) Recycling of electronic scrap at Umicore precious metals refining. Acta Metall Slovaca 12:111–120
Hagelüken C, Refining UPM, Greinerstraat A (2005) In Recycling of electronic scrap at Umicore's integrated metals smelter and refinery. Proc EMC 152–161
Hamaguchi T, Omae K, Takebayashi T, Kikuchi Y, Yoshioka N, Nishiwaki Y, Tanaka A, Hirata M, Taguchi O, Chonan T (2008) Exposure to hardly soluble indium compounds in ITO production and recycling plants is a new risk for interstitial lung damage. Occup Environ Med 65(1):51–55
Huang K, Guo J, Xu Z (2009) Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. J Hazard Mater 164(2–3):399–408
Kahhat R, Williams E (2012) Materials flow analysis of e-waste: domestic flows and exports of used computers from the United States. Resour Conserv Recycl 67:67–74
KC-SWD (2008) Flat panel displays: end of life management report. King County Solid Waste Division (KC-SWD), Seattle
Law RJ, Covaci A, Harrad S, Herzke D, Abdallah MAE, Fernie K, Toms LML, Takigami H (2014) Levels and trends of PBDEs and HBCDs in the global environment: status at the end of 2012. Environ Int 65:147–158
Lee C, Hsi C (2001) Recycling of scrap Cathode Ray Tubes. Environ Sci Technol 36(1):69–75
Leung A, Duzgoren-Aydin N, Cheung K, Wong M (2008) Heavy metals concentrations of surface dust from e-waste recycling and its human health implications in Southeast China. Environ Sci Technol 42(7):2674–2680
Li J, Tian B, Liu T, Liu H, Wen X, Honda S (2006) Status quo of e-Waste Manage in mainland China. J Mater Cycles Waste Manag 8(1):13–20
Li J, Lu H, Guo J, Xu Z, Zhou Y (2007) Recycle technology for recovering resources and products fromwaste printed circuit boards. Environ Sci Technol 41:1995–2000
Li Y, Xu X, Wu K, Chen G, Liu J, Chen S, Gu C, Zhang B, Zheng L, Zheng M, Huo X (2008) Monitoring of lead load and its effect on neonatal behavioral neurological assessment scores in Guiyu, an electronic waste recycling town in China. J Environ Monit 10(10):1233–1238
Li J, Gao S, Duan H, Liu L (2009) Recovery of valuable materials from waste liquid crystal display panel. Waste Manag 29(7):2033–2039
Li J, Duan H, Shi P (2011) Heavy metal contamination of surface soil in electronic waste dismantling area: site investigation and source-apportionment analysis. Waste Manag Res 29(7):727–738
Lim SR, Schoenung JM (2010) Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays. J Hazard Mater 177(1–3):251–259
Ling T, Poon C (2012) A comparative study on the feasible use of recycled beverage and CRT funnel glass as fine aggregate in cement mortar. J Clean Prod 29–30:46–52
Liu X, Tanaka M, Matsui Y (2006) Generation amount prediction and material flow analysis of electronic waste: a case study in Beijing. China Waste Manag Res 24(5):434–445
Lu X, Shih K, Liu C, Wang F (2013) Extraction of metallic lead from Cathode Ray Tube (CRT) funnel glass by thermal reduction with metallic iron. Environ Sci Technol 47(17):9972–9978
Man M, Naidu R, Wong MH (2013) Persistent toxic substances released from uncontrolled e-waste recycling and actions for the future. Sci Total Environ 463–464:1133–1137
Martinho G, Pires A, Saraiva L, Ribeiro R (2012) Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling. Waste Manag 32(6):213–1217
Matthews HS, McMichael FC, Hendrickson CT, Hart DJ (1997) Disposition and end-of-life options for personal computers. In Carnegie Mellon University
Miller TR (2012) Quantitative characterization of transboundary flows of used electronics: a case study of the United States. Massachusetts Institute of Technology, Cambridge
Mueller J, Boehm M, Drummond C (2012) Direction of CRT waste glass processing: electronics recycling industry communication. Waste Manag 32(8):1560–1565
Müller E, Schluep M, Widmer R, Gottschalk F, Böni H (2009) Assessment of e-waste flows: A probabilistic approach to quantify e-waste based on world ICT and development indicators. In EMPA: Swiss Federal Laboratories for Materials Testing and Research
Murakami S, Oguchi M, Tasaki T, Daigo I, Hashimoto S (2010) Lifespan of commodities, Part I. J Ind Ecol 14:598–612
Ni K, Lu Y, Wang T, Shi Y, Kannan K, Xu L, Li Q, Liu S (2013) Polybrominated diphenyl ethers (PBDEs) in China: policies and recommendations for sound management of plastics from electronic wastes. J Environ Manag 115:114–123
Nnorom I, Osibanjo O, Ogwuegbu M (2011) Global disposal strategies for waste Cathode Ray Tubes. Resour Conserv Recycl 55(3):275–290
Oguchi M, Kameya T, Yagi S, Urano K (2008) Product flow analysis of various consumer durables in Japan. Resour Conserv Recycl 52(3):463–480
Oguchi M, Murakami S, Tasaki T, Daigo I, Hashimoto S (2010) Lifespan of commodities, Part II. J Ind Ecol 14:613–626
PCONLINE. Unit Weight data (product specification introduction) (for various types of electric and electronic). PCONLINE; 2014. http://product.pconline.com.cn/washer/c4881/25s1.shtml
Peeters J, Vanegas P, Tange L, Van Houwelingen J, Duflou J (2014) Closed loop recycling of plastics containing Flame Retardants. Resour Conserv Recycl 84:35–43
Salhofer S, Spitzbart M, Maurer K (2011) Recycling of LCD Screens in Europe - State of the Art and Challenges. In Glocalized Solutions for Sustainability in Manufacturing, Berlin Heidelberg, pp 454–458
Salhofer S, Spitzbart M, Maurer K (2012) Recycling of flat screens as a new challenge. Proc ICE Waste Resour Manag 165(1):37–43
Shinkuma T, Huong N (2009) The flow of E-waste material in the Asian region and a reconsideration of international trade policies on E-waste. Environ Impact Assess Rev 29(1):25–31
Sohaili J, Muniyandi SK, Mohamad SS (2012) A Review on printed circuit board recycling technology. JETEAS 3(1):12–18
Song Q, Li J (2014) A systematic review of the human body burden of e-waste exposure in China. Environ Int 68:82–93
Stenvall E, Tostar S, Boldizar A, Foreman MRS, Möller K (2013) An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE). Waste Manag 33(4):915–922
Stevels A, Huisman J, Wang F, Li J, Li B, Duan H (2013) Take back and treatment of discarded electronics: a scientific update. Front Environ Sci Eng 7(4):475–482
Sthiannopkao S, Wong M (2013) Handling e-waste in developed and developing countries: initiatives, practices, and consequences. Sci Total Environ 463–464:1147–1153
Streicher-Porte M, Widmer R, Jain A, Bader HP, Scheidegger R, Kytzia S (2005) Key drivers of the e-waste recycling system: assessing and modelling e-waste processing in the informal sector in Delhi. Environ Impact Assess Rev 25(5):472–491
Sun Yat-sen University & Greenpeace (2003) China anthropological report on electronic waste disposal industry in Guiyu, Shantou. Sun Yat-sen University (Anthropology Department) & Greenpeace
Tian H, White paper on WEEE recycling industry in China (2012) China Household Electric Appliance Research Institute: Beijing, China; 2013. (in Chinese)
UNEP (2007) E-waste volume I: Inventory assessment manual. United Nations Environment Programme (UNEP), International Environmental Technology Centre. Osaka Office, Japan
USEPA (2011) Electronics waste management in the United States through 2009. U.S. Environmental Protection Agency (USEPA), Washington DC
Wang J, Ma Y, Chen S, Tian M, Luo J, Mai X (2010) Brominated flame retardants in house dust from e-waste recycling and urban areas in South China: implications on human exposure. Environ Int 36(6):535–541
Wang H, Han M, Yang S, Chen Y, Liu Q, Ke S (2011) Urinary heavy metal levels and relevant factors among people exposed to e-waste dismantling. Environ Int 37(1):80–85
Wang F, Huisman J, Meskers CEM, Schluep M, Stevels A, Hagelüken C (2012) The Best-of-2-Worlds philosophy: developing local dismantling and global infrastructure network for sustainable e-waste treatment in emerging economies. Waste Manag 32(11):2134–2146
Wang F, Huisman J, Stevels A, Baldé CP (2013a) Enhancing e-waste estimates: improving data quality by multivariate Input–Output Analysis. Waste Manag 33(11):2397–2407
Wang F, Kuehr R, Ahlquist D, Li J (2013) E-waste in China: a country report. UNU-ISP SCYCLE & Tsinghua University
Xu Q, Li G, He W, Huang J, Shi X (2012) Cathode ray tube (CRT) recycling: current capabilities in China and research progress. Waste Manag 32(8):1566–1574
Yang Y, Williams E (2009) Logistic model-based forecast of sales and generation of obsolete computers in the US. Technol Forecast Soc Chang 76(8):1105–1114
Yang J, Lu B, Xu C (2008) WEEE flow and mitigating measures in China. Waste Manag 28(9):1589–1597
Yang J, Retegan T, Ekberg C (2013a) Indium recovery from discarded LCD panel glass by solvent extraction. Hydrometallurgy 137:68–77
Yang X, Sun L, Xiang J, Hu S, Su S (2013b) Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review. Waste Manag 33(2):462–473
Yoshida A (2011) Recyclable waste and goods trade of mainland China. Economic Integration and Recycling in Asia: An Interim Report). Chosakenkyu Hokokusho, Institute of Developing Economies. http://www.ide.go.jp/Japanese/Publish/Download/Report/2010/pdf/2010_431_03.pdf.
Yu J, Williams E, Ju M, Yang Y (2010) Forecasting Global Generation of Obsolete Personal Computers. Environ Sci Technol 44(9):3232–3237
Yuan W, Li J, Zhang Q, Saito F (2012) Innovated application of mechanical activation to separate lead from scrap Cathode Ray Tube funnel glass. Environ Sci Technol 46(7):4109–4114
ZDC (2014) Market shares survry data and Unit Weight data (product specification introduction) (for various types of electric and electronic). ZDC. http://zdc.zol.com.cn/topic/871253.html
Zeng X, Li J, Xie H, Liu L (2013) A novel dismantling process of waste printed circuit boards using water-soluble ionic liquid. Chemosphere 93(7):1288–1294
Zhang L, Yuan Z, Bi J, Huang L (2012) Estimating future generation of obsolete household appliances in China. Waste Manag Res 30(11):1160–1168
Zhang Q, Ye J, Chen J, Xu H, Wang C, Zhao M (2014a) Risk assessment of polychlorinated biphenyls and heavy metals in soils of an abandoned e-waste site in China. Environ Pollut 185:258–265
Zhang S, Xu X, Wu Y, Ge J, Li W, Huo X (2014b) Polybrominated diphenyl ethers in residential and agricultural soils from an electronic waste polluted region in South China: distribution, compositional profile, and sources. Chemosphere 102:55–60
Zhou X, Guo J, Lin K, Huang K, Deng J (2013) Leaching characteristics of heavy metals and brominated flame retardants from waste printed circuit boards. J Hazard Mater 246–247:96–102
Acknowledgments
The authors thank the “Hong Kong, Macao and Taiwan Science & Technology Cooperation Program of China” (2014DFM90170) from Ministry of Science and Technology of China, the Scientific Research Foundation of Introduced High Talent Financial Subsidies of Shenzhen University (000044), NSFC (21507090), and also thank the Shanghai Cooperative Centre for WEEE Recycling for funding and support. In addition, the authors would like to acknowledge Mr. Ned Miller for language editing and comments. We are also grateful to three anonymous reviewers for their instructive comments.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Responsible editor: Philippe Garrigues
Electronic supplementary material
Below is the link to the electronic supplementary material.
ESM 1
(DOCX 449 kb)
Rights and permissions
About this article
Cite this article
Duan, H., Hu, J., Tan, Q. et al. Systematic characterization of generation and management of e-waste in China. Environ Sci Pollut Res 23, 1929–1943 (2016). https://doi.org/10.1007/s11356-015-5428-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-015-5428-0