Abstract
Background, aim, and scope
During the last decades, the electronics industry has undergone tremendous changes due to intense research leading to advanced technology development. Multiple life cycle assessment (LCA) studies have been performed on the environmental implications of consumer electronics. The aim of this review is to assess the consistency between different LCA studies for desktop computers, laptop computers, mobile phones and televisions (TVs).
Materials and methods
A literature study was conducted covering some key LCA contributions to the consumer electronics field. The focus is primarily on global warming potential during 100 years (GWP100) efficiency in different life cycle phases and secondarily on primary energy usage/electricity usages which are normalised per year to find inconsistencies.
Results
The life cycle impact assessment GWP100 results for consumer electronics over the years suggest that most studies are of comparable quality; however, some studies are neither coherent nor transparent. Published LCAs for mobile phone and TV sets are consistent, whereas for laptop and desktop computers, the studies occasionally give conflicting messages.
Discussion
The inconsistencies appear to be rooted in subjective choices and different system boundaries and lifetime, rather than lack of standardisation. If included, the amounts of emissions of sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3) are crucial to the GWP100 in the various life cycle phases for a desktop using liquid crystal display (LCD) screen. Another important observation is that the MEEuP methodology report/tool underestimates the GWP100 of electronic component manufacturing processes.
Conclusions
Between 1997 and 2010, the ISO 14040/44 standards have ensured a rather consistent set of GWP100 results for the studied products. However, the lack of transparency for consumer electronics LCAs sometimes makes benchmarking difficult. It is nevertheless possible to compare new LCA calculations to existing studies. It is also possible to reveal which product studies are consistent with studies of submaterials and subcomponents. In most cases, the GWP100 results for consumer electronics are consistent. Based on the survey of published work, recycling and other end-of-life processes have a tiny share of the total GWP100 score for consumer electronics.
Recommendations and perspectives
LCA researchers should as a rule, if possible, make a historical survey of their technical system to establish trends, proportions and relations. Policy makers ought to ask for these surveys when using LCAs for decision support. This charter is necessary as to understand the reasonableness of the results. Additions to the ISO14040/44 LCA standardisation for mass–volume products would be worthwhile as a means of increasing the consistency.
Similar content being viewed by others
References
Alonso JC, Rodrigo J, Castells F (2003) Design for environment of electrical and electronic automotive components based on life cycle assessment. Gate to EHS, March 17:1–7
Aoe T (2003) Case study for calculation of factor x (eco-efficiency) — comparing CRT TV, PDP TV and LCD TV. Proc. 3rd int symp env conscious design inverse man, Tokyo, Japan, Dec. 11–13, pp 650–655
Apple (2009) iMac Environmental report, March 3, 2009
Atlantic Consulting and IPU (1998) LCA study of the product group personal computers in the EU eco-label scheme. LCA study (version 1.2). EU eco-labels for personal computers, Atlantic Consulting and IPU
Barba-Gutierrez Y, Adenso-Diaz B, Hopp M (2008) An analysis of some environmental consequences of European electrical and electronic waste regulation. Res Cons Rec 52:481–495
Barba-Gutierrez Y, Adenso-Diaz B, Hopp M (2009) Eco-efficiency of electric and electronic appliances: a data envelopment analysis (DEA). Environ Model Assess 14:439–444
Bergelin F (2008) Life cycle assessment of a mobile phone — a model on manufacturing, using, and recycling. Master thesis, Uppsala University, Uppsala, Sweden
Boyd SB, Horvath A, Dornfeld D (2009) Life-cycle energy demand and global warming potential of computational logic. Environ Sci Technol 43:7303–7309
Choi BC, Shin HS, Lee SY (2006) Life cycle assessment of a personal computer and its effective recycling rate. Int J LCA 11:122–128
Confidential (2009) LCA of HSDPA phone
Dodbiba G, Takahashi K, Sadaki J et al (2008) The recycling of plastic wastes from discarded TV sets: comparing energy recovery with mechanical recycling in the context of life cycle assessment. J Clean Prod 16:458–470
Duan H, Eugster M, Hischier R et al (2009) Life cycle assessment study of a Chinese desktop personal computer. Sci Total Environ 407:1755–1764
Ecoinvent database (2008a) Name in db: laptop computer, at plant/GLO U
Ecoinvent database (2008b) Name in db: use, computer, laptop, office use/CH U
Ecoinvent database (2008c) Name in db: disposal, laptop computer, to WEEE treatment/CH U
Ecoinvent database (2008d) Name in db: desktop computer, without screen, at plant/GLO U
Ecoinvent database (2008e) Name in db: CRT screen, 17 inches, at plant/GLO U
Ecoinvent database (2008f) Name in db: keyboard, standard version, at plant/GLO U
Ecoinvent database (2008g) Name in db: mouse device, optical, with cable, at plant/GLO U
Ecoinvent database (2008h) Name in db: use, computer, desktop, with CRT monitor, office use/RER U
Ecoinvent database (2008i) Name in db: disposal, mouse device, optical, with cable, to WEEE treatment/CH U
Ecoinvent database (2008j) Name in db: disposal, keyboard, standard version, to WEEE treatment/CH U
Ecoinvent database (2008k) Name in db: disposal, desktop computer, to WEEE treatment/CH U
Ecoinvent database (2008l) Name in db: disposal, CRT screen, 17 inches, to WEEE treatment/CH U
Ecoinvent database (2008m) Name in db: LCD flat screen, 17 inches, at plant/GLO U
Ecoinvent database (2008n) Name in db: disposal, LCD flat screen, 17 inches, to WEEE treatment/CH U
European Commission (2005) MEEuP methodology report
Feng C, Ma XG (2009) The energy consumption and environmental impacts of a color TV set in China. J Clean Prod 17:13–25
Frey SD, Harrison DJ, Billett EH (2006) Ecological footprint analysis applied to mobile phones. J Ind Ecol 10:199–216
Goymann M, Wittenwiler M, Hellweg S (2008) Environmental decision support for the construction of a “green mountain hut. Environ Sci Technol 42:4060–4067
Gurauskiene I, Varzinskas V (2006) Eco-design methodology for electrical and electronic equipment industry. Environ Res Eng Manag 3:43–51
Helling RK, Russell DA (2009) Use of life cycle assessment to characterise the environmental impacts of polyol production options. Green Chem 11:380–389
Huawei Technologies (2009) Internal calculations in SimaPro 7 of printed board assemblies.
IVF (2007a) European Commission DG TREN Preparatory studies for eco-design requirements ofEuPs. IVF Report 07004. Laptop used in office. Table 91
IVF (2007b) European Commission DG TREN Preparatory studies for eco-design requirements of EuPs. IVF Report 07004. Desktop with 17” CRT-display used in an office. Table 97
IVF (2007c) European Commission DG TREN Preparatory studies for eco-design requirements of EuPs. IVF Report 07004. Desktop with 17” LCD-display used in an office. Table 93
Kim S, Hwang T, Overcash M (2001) Life cycle assessment study of a color computer monitor. Int J LCA 6:35–43
Lu L, Wernick IK, Hsiao TY et al (2006) Balancing the life cycle impacts of notebook computers: Taiwan’s experience. Resour Conserv Recycl 48:13–25
Muñoz I, Gazulla C, Bala A et al (2009) LCA and ecodesign in the toy industry: case study of a teddy bear incorporating electric and electronic components. Int J LCA 14:64–72
Nokia (2005) Integrated product policy pilot project — Stage I Final report: life cycle environmental issues of mobile phones
Park PJ, Lee KM, Wimmer W (2006) Development of an environmental assessment method for consumer electronics by combining top-down and bottom-up approaches. Int J LCA 11:254–264
PE International (2008) Environmental footprint of ICT equipment in manufacture, use, and end-of-life. Presentation held at ECOC Brussels, Belgium, Sept 23
Reap J, Roman F, Duncan S et al (2008) A survey of unresolved problems in life cycle assessment — Part 1: goal and scope and inventory analysis. Int J LCA 13:290–300
Rockström J, Steffen W, Noone K et al (2009) A safe operating space for humanity. Nature 461:472–475
Scharnhorst W (2008) Life cycle assessment in the telecommunication industry: a review. Int J LCA 13(1):75–86
Socolof ML, Overly JG, Geibig JR (2005) Environmental life-cycle impacts of CRT and LCD desktop computer displays. J Clean Prod 13:1281–1294
Tekawa M, Miyamoto S, Inaba A (1997) Life cycle assessment; an approach to environmentally friendly PCs. Proc IEEE Int Symp Electron Environ, May 5–7, San Francisco, CA, pp. 125–130
Williams E (2004) Energy intensity of computer manufacturing: hybrid assessment combining process and economic input–output methods. Environ Sci Technol 38:6166–6174
Yung WKC, Chan HK, So JHT (2009) A life-cycle assessment for eco-redesign of a consumer electronic product. J Eng Design (electronic version)
Zhou X, Schoenung JM (2007) An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution. J Environ Manag 83:1–24
Acknowledgement
The authors would like to thank Vestlandsforskning, Huawei Technologies and the anonymous reviewers.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Andrae, A.S.G., Andersen, O. Life cycle assessments of consumer electronics — are they consistent?. Int J Life Cycle Assess 15, 827–836 (2010). https://doi.org/10.1007/s11367-010-0206-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11367-010-0206-1