Skip to main content
Erschienen in: The International Journal of Life Cycle Assessment 1/2013

01.01.2013 | LCA OF WASTE MANAGEMENT SYSTEMS

A method for allocation according to the economic behaviour in the EU-ETS for by-products used in cement industry

verfasst von: Guillaume Habert

Erschienen in: The International Journal of Life Cycle Assessment | Ausgabe 1/2013

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Purpose

The most efficient way to reduce the environmental impact of cement production is to replace Portland cement with alternative cementitious materials. These are most often industrial waste such as blast-furnace slags (GBFS) and coal combustion fly ashes (FA). However, a recent European directive no longer considers these products as waste but as by-products. Therefore, the impact of their production has to be considered. Within this new framework, this study develops an evaluation method of their environmental impacts.

Method

This paper presents pre-existing methods and underlines their limits. Through our evaluation of these methods, it has become clear that the allocation procedure is necessary; however, results depend highly on the chosen allocation procedure. This study presents a new allocation method, based on the fact that both cement and the alternative materials, GBFS and FA, are produced by energy-intensive industries (cement iron and coal) which are all subjected to the European Union Greenhouse Gas Emission Trading System. In this carbon trading system, it is economically beneficial for industries to reduce their environmental impact, like for when, by example, by-products from one industry are used as alternative ‘green’ material by another industry. Our allocation coefficient is calculated so that the economic gains and losses are the same for all of the industries involved in these exchanges and provides the overall environmental benefit of the exchanges.

Results and discussion

The discussion shows that whilst this method has much in common with other allocation methods, it is more accurate as it allocates the environmental costs fairly over the industries involved and is more robust because of its constant value. One of its limits is that it cannot be used for life cycle inventories; however, we test the possibility of choosing a coefficient from one impact category and applying it to all the others.

Conclusion

Lastly, the technical term of the equation this paper presents could be employed for consequential life cycle assessment, to calculate the most environmental uses by-products could be put to.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat AFNOR, French Normalisation Organisation (2004) NF EN 206-1 Concrete—part I: specification, performance, production and conformity. Department of Standards Malaysia, Selangor AFNOR, French Normalisation Organisation (2004) NF EN 206-1 Concrete—part I: specification, performance, production and conformity. Department of Standards Malaysia, Selangor
Zurück zum Zitat Asif M, Muneer T, Kelley R (2007) Life cycle assessment: a case study of a dwelling home in Scotland. Build Environ 42:391–1394CrossRef Asif M, Muneer T, Kelley R (2007) Life cycle assessment: a case study of a dwelling home in Scotland. Build Environ 42:391–1394CrossRef
Zurück zum Zitat Asokan P, Osamani M, Price ADF (2009) Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites. J Clean Prod 17:821–829CrossRef Asokan P, Osamani M, Price ADF (2009) Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites. J Clean Prod 17:821–829CrossRef
Zurück zum Zitat Ayer NW, Tyedmers PH, Pelletier NL, Sonesson U, Scholz A (2007) Co-product allocation in life cycle assessments of seafood production systems: review of problems and strategies. Int J Life Cycle Assess 12:480–487 Ayer NW, Tyedmers PH, Pelletier NL, Sonesson U, Scholz A (2007) Co-product allocation in life cycle assessments of seafood production systems: review of problems and strategies. Int J Life Cycle Assess 12:480–487
Zurück zum Zitat Babbitt CW, Lindner AS (2008) A life cycle comparison of disposal and beneficial use of coal combustion products in Florida. Part 1: methodology and inventory of materials, energy and emissions. Int J Life Cycle Assess 13:202–211CrossRef Babbitt CW, Lindner AS (2008) A life cycle comparison of disposal and beneficial use of coal combustion products in Florida. Part 1: methodology and inventory of materials, energy and emissions. Int J Life Cycle Assess 13:202–211CrossRef
Zurück zum Zitat Barbosa R, Lapa N, Lopes H, Gulyurtlu I, Mendes B (2011) Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions. Waste Manag 31:2009–2019CrossRef Barbosa R, Lapa N, Lopes H, Gulyurtlu I, Mendes B (2011) Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions. Waste Manag 31:2009–2019CrossRef
Zurück zum Zitat Basset-Mens C, van der Werf HMG (2005) Scenario-based environmental assessment of farming systems: the case of pig production in France. Agric Ecosyst Environ 105:127–144CrossRef Basset-Mens C, van der Werf HMG (2005) Scenario-based environmental assessment of farming systems: the case of pig production in France. Agric Ecosyst Environ 105:127–144CrossRef
Zurück zum Zitat Benetto E, Rousseaux P, Blondin J (2004) Life cycle assessment of coal by-products based electric power production scenarios. Fuel 83:957–970CrossRef Benetto E, Rousseaux P, Blondin J (2004) Life cycle assessment of coal by-products based electric power production scenarios. Fuel 83:957–970CrossRef
Zurück zum Zitat Chan WWJ, Wu CML (2000) Durability of concrete with high cement replacement. Cem Concr Res 30:865–879CrossRef Chan WWJ, Wu CML (2000) Durability of concrete with high cement replacement. Cem Concr Res 30:865–879CrossRef
Zurück zum Zitat Chang N-B, Wang HB, Huang WL, Lin KS (1999) The assessment of reuse potential for municipal solid waste and refused derived fuel incineration ashes. Resour Conserv Recycl 25:255–270CrossRef Chang N-B, Wang HB, Huang WL, Lin KS (1999) The assessment of reuse potential for municipal solid waste and refused derived fuel incineration ashes. Resour Conserv Recycl 25:255–270CrossRef
Zurück zum Zitat Chen C, Habert G, Bouzidi Y, Jullien A, Ventura A (2010) LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete. Res Cons Recycl 54:1231–1240CrossRef Chen C, Habert G, Bouzidi Y, Jullien A, Ventura A (2010) LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete. Res Cons Recycl 54:1231–1240CrossRef
Zurück zum Zitat Chen A, Lin W-T, Huang R (2011) Application of rock wool waste in cement-based composites. Mater Design 32:635–642 Chen A, Lin W-T, Huang R (2011) Application of rock wool waste in cement-based composites. Mater Design 32:635–642
Zurück zum Zitat Damtoft J, Lukasik J, Herfort D, Sorrentino D, Gartner E (2008) Sustainable development and climate change initiatives. Cem Concr Res 38:115–127CrossRef Damtoft J, Lukasik J, Herfort D, Sorrentino D, Gartner E (2008) Sustainable development and climate change initiatives. Cem Concr Res 38:115–127CrossRef
Zurück zum Zitat Ekvall T, Finnveden G (2001) Allocation in ISO 14041—a critical review. J Clean Prod 9:197–208CrossRef Ekvall T, Finnveden G (2001) Allocation in ISO 14041—a critical review. J Clean Prod 9:197–208CrossRef
Zurück zum Zitat Escalante-García JI, Magallanes-Rivera RX, Gorokhovsky A (2009) Waste gypsum–blast furnace slag cement in mortars with granulated slag and silica sand as aggregates. Constr Build Mater 23:2851–2855CrossRef Escalante-García JI, Magallanes-Rivera RX, Gorokhovsky A (2009) Waste gypsum–blast furnace slag cement in mortars with granulated slag and silica sand as aggregates. Constr Build Mater 23:2851–2855CrossRef
Zurück zum Zitat European Union (2008) Directive 2008/98/EC of the European parliament and of the council on waste and repealing certain directives. Official journal of the European Union, 22.11.2008, L312: 3–30 European Union (2008) Directive 2008/98/EC of the European parliament and of the council on waste and repealing certain directives. Official journal of the European Union, 22.11.2008, L312: 3–30
Zurück zum Zitat European Union (2009) Directive 2009/29/EC of the European parliament and of the council amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the Community. Official Journal of the European Union, 23.04.2009, L 140: 63–87 European Union (2009) Directive 2009/29/EC of the European parliament and of the council amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the Community. Official Journal of the European Union, 23.04.2009, L 140: 63–87
Zurück zum Zitat Ewais EMM, Khalil NM, Amin MS, Ahmed YMZ, Barakat MA (2009) Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cement. Ceram Int 35:3381–3388CrossRef Ewais EMM, Khalil NM, Amin MS, Ahmed YMZ, Barakat MA (2009) Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cement. Ceram Int 35:3381–3388CrossRef
Zurück zum Zitat Fava JA (2006) Will the next 10 years be as productive in advancing life cycle approaches as the last 15 years? Int J Life Cycle Assess 11:6–8CrossRef Fava JA (2006) Will the next 10 years be as productive in advancing life cycle approaches as the last 15 years? Int J Life Cycle Assess 11:6–8CrossRef
Zurück zum Zitat Flower DJM, Sanjayan JG (2007) Greenhouse gas emissions due to concrete manufacture. Int J Life Cycle Assess 12:282–288 Flower DJM, Sanjayan JG (2007) Greenhouse gas emissions due to concrete manufacture. Int J Life Cycle Assess 12:282–288
Zurück zum Zitat Frıas M, Rodrıguez C (2008) Effect of incorporating ferroalloy industry wastes as complementary cementing materials on the properties of blended cement matrices. Cem Concr Comp 30:212–219CrossRef Frıas M, Rodrıguez C (2008) Effect of incorporating ferroalloy industry wastes as complementary cementing materials on the properties of blended cement matrices. Cem Concr Comp 30:212–219CrossRef
Zurück zum Zitat Frichknecht R (2000) Allocation in life cycle inventory analysis for joint production. Int J Life Cycle Assess 5:85–95CrossRef Frichknecht R (2000) Allocation in life cycle inventory analysis for joint production. Int J Life Cycle Assess 5:85–95CrossRef
Zurück zum Zitat Friedlingstein P, Houghton RA, Marland G, Hackler J, Boden TA, Conway TJ, Canadell JG, Raupach MR, Ciais P, Le Quéré C (2010) Uptake on CO2 emissions. Nat Geosci 3:811–812CrossRef Friedlingstein P, Houghton RA, Marland G, Hackler J, Boden TA, Conway TJ, Canadell JG, Raupach MR, Ciais P, Le Quéré C (2010) Uptake on CO2 emissions. Nat Geosci 3:811–812CrossRef
Zurück zum Zitat Gartner E (2004) Industrially interesting approaches to “low-CO2” cements. Cem Concr Res 34:1489–1498CrossRef Gartner E (2004) Industrially interesting approaches to “low-CO2” cements. Cem Concr Res 34:1489–1498CrossRef
Zurück zum Zitat Goedkoop M, Oele M (2004) Simapro database manual. Methods library. Pre consultants BV, Amersfoort Goedkoop M, Oele M (2004) Simapro database manual. Methods library. Pre consultants BV, Amersfoort
Zurück zum Zitat Guinée JB, Gorrée M, Heijungs R, Huppes G, Kleijn R, van Oers L, Wegener Sleeswijk A, Suh S, Udo de Haes HA, de Bruijn H, vanDuin R, Huijbregts MAJ (2002) Life cycle assessment: an operational guide to the ISO standards. Kluwer Academic Publishers, Dordrecht Guinée JB, Gorrée M, Heijungs R, Huppes G, Kleijn R, van Oers L, Wegener Sleeswijk A, Suh S, Udo de Haes HA, de Bruijn H, vanDuin R, Huijbregts MAJ (2002) Life cycle assessment: an operational guide to the ISO standards. Kluwer Academic Publishers, Dordrecht
Zurück zum Zitat Habert G, Roussel N (2009) Study of two concrete mix-design strategies to reach carbon mitigation objectives. Cem Concr Comp 31:397–402CrossRef Habert G, Roussel N (2009) Study of two concrete mix-design strategies to reach carbon mitigation objectives. Cem Concr Comp 31:397–402CrossRef
Zurück zum Zitat Habert G, Billard C, Rossi P, Chen C, Roussel N (2010) Cement production technology improvement compared to factor 4 objectives. Cem Concr Res 40:820–826CrossRef Habert G, Billard C, Rossi P, Chen C, Roussel N (2010) Cement production technology improvement compared to factor 4 objectives. Cem Concr Res 40:820–826CrossRef
Zurück zum Zitat Heijungs R (1994) A generic method for the identification of options for cleaner products. Ecol Econ 10:69–81CrossRef Heijungs R (1994) A generic method for the identification of options for cleaner products. Ecol Econ 10:69–81CrossRef
Zurück zum Zitat Heijungs R, Frischknecht R (1998) A special view on the nature of the allocation problem. Int J Life Cycle Assess 3:321–332CrossRef Heijungs R, Frischknecht R (1998) A special view on the nature of the allocation problem. Int J Life Cycle Assess 3:321–332CrossRef
Zurück zum Zitat Heijungs R, Guinée JB (2007) Allocation and ‘What if’ scenarios in life cycle assessment of waste management systems. Waste Manag 27:997–1005CrossRef Heijungs R, Guinée JB (2007) Allocation and ‘What if’ scenarios in life cycle assessment of waste management systems. Waste Manag 27:997–1005CrossRef
Zurück zum Zitat Huntzinger DN, Eatmon TD (2009) A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies. J Clean Prod 17:668–675CrossRef Huntzinger DN, Eatmon TD (2009) A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies. J Clean Prod 17:668–675CrossRef
Zurück zum Zitat ISO (2006) Environmental management—life cycle assessment—principles and framework; ISO 14040. International Standardisation Organisation ISO (2006) Environmental management—life cycle assessment—principles and framework; ISO 14040. International Standardisation Organisation
Zurück zum Zitat Karstensen KH (2008) Formation, release and control of dioxins in cement kilns. Chemosphere 70:543–560CrossRef Karstensen KH (2008) Formation, release and control of dioxins in cement kilns. Chemosphere 70:543–560CrossRef
Zurück zum Zitat Kawai K, Sugiyama T, Kobayashi K, Sano S (2005) Inventory data and case studies for environmental performance evaluation of concrete structure construction. J Adv Concr Techno 3:435–456CrossRef Kawai K, Sugiyama T, Kobayashi K, Sano S (2005) Inventory data and case studies for environmental performance evaluation of concrete structure construction. J Adv Concr Techno 3:435–456CrossRef
Zurück zum Zitat Kellenberger D, Althaus H-J (2003) Life cycle inventories of building products. Final report Ecoinvent, EMPA Dübendorf, Swiss Centre for Life Cycle Inventories Kellenberger D, Althaus H-J (2003) Life cycle inventories of building products. Final report Ecoinvent, EMPA Dübendorf, Swiss Centre for Life Cycle Inventories
Zurück zum Zitat Kourounis S, Tsivilis S, Tsakiridis PE, Papadimitriou GD, Tsibouki Z (2007) Properties and hydration of blended cements with steelmaking slag. Cem Concr Res 37:815–822CrossRef Kourounis S, Tsivilis S, Tsakiridis PE, Papadimitriou GD, Tsibouki Z (2007) Properties and hydration of blended cements with steelmaking slag. Cem Concr Res 37:815–822CrossRef
Zurück zum Zitat Kuryatnyk T, Chabannet M, Ambroise J, Pera J (2010) Leaching behaviour of mixtures containing plaster of Paris and calcium sulphoaluminate clinker. Cem Concr Res 40:1149–1156CrossRef Kuryatnyk T, Chabannet M, Ambroise J, Pera J (2010) Leaching behaviour of mixtures containing plaster of Paris and calcium sulphoaluminate clinker. Cem Concr Res 40:1149–1156CrossRef
Zurück zum Zitat Lee K-M, Park P-J (2005) Estimation of the environmental credit for the recycling of granulated blast furnace slag based on LCA. Res Cons Recycl 44:139–151CrossRef Lee K-M, Park P-J (2005) Estimation of the environmental credit for the recycling of granulated blast furnace slag based on LCA. Res Cons Recycl 44:139–151CrossRef
Zurück zum Zitat Lundie S, Ciroth A, Huppes G (2007) Inventory methods in LCA: towards consistency and improvement. Final report. UNEP-SETAC Life Cycle Initiative Lundie S, Ciroth A, Huppes G (2007) Inventory methods in LCA: towards consistency and improvement. Final report. UNEP-SETAC Life Cycle Initiative
Zurück zum Zitat Ortiz O, Castells F, Sonnemann G (2008) Sustainability in the construction industry: a review of recent developments based on LCA. Constr Build Mater 23:28–39CrossRef Ortiz O, Castells F, Sonnemann G (2008) Sustainability in the construction industry: a review of recent developments based on LCA. Constr Build Mater 23:28–39CrossRef
Zurück zum Zitat Osborne GJ (1999) Durability of Portland blast-furnace slag cement concrete. Cem Concr Comp 21:11–21CrossRef Osborne GJ (1999) Durability of Portland blast-furnace slag cement concrete. Cem Concr Comp 21:11–21CrossRef
Zurück zum Zitat Parrott L (2002) Cement, Concrete and Sustainability. A report on the progress of the UK cement and concrete industry towards sustainability. Technical report, British Cement Association Parrott L (2002) Cement, Concrete and Sustainability. A report on the progress of the UK cement and concrete industry towards sustainability. Technical report, British Cement Association
Zurück zum Zitat Pera J, Amrouz A (1998) Development of highly reactive metakaolin from paper sludge. Adv Ceram Bas Mater 7:49–56CrossRef Pera J, Amrouz A (1998) Development of highly reactive metakaolin from paper sludge. Adv Ceram Bas Mater 7:49–56CrossRef
Zurück zum Zitat Pera J, Boumaza R, Ambroise J (1997) Development of a pozzolanic pigment from red mud. Cem Concr Res 27:1513–1522CrossRef Pera J, Boumaza R, Ambroise J (1997) Development of a pozzolanic pigment from red mud. Cem Concr Res 27:1513–1522CrossRef
Zurück zum Zitat Pereira-de-Oliveira LA, Castro-Gomes JP, Santos PMS (2012) The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components. Constr Build Mater 31:197–203CrossRef Pereira-de-Oliveira LA, Castro-Gomes JP, Santos PMS (2012) The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components. Constr Build Mater 31:197–203CrossRef
Zurück zum Zitat Reap J, Roman F, Duncan S, Bras B (2008) A survey of unresolved problems in life cycle assessment. Part I: goals and scope and inventory analysis. Int J Life Cycle Assess 13:290–300CrossRef Reap J, Roman F, Duncan S, Bras B (2008) A survey of unresolved problems in life cycle assessment. Part I: goals and scope and inventory analysis. Int J Life Cycle Assess 13:290–300CrossRef
Zurück zum Zitat Schneider M, Romer M, Tschudin M, Bolio H (2011) Sustainable cement production—present and future. Cem Concr Res 41:642–650CrossRef Schneider M, Romer M, Tschudin M, Bolio H (2011) Sustainable cement production—present and future. Cem Concr Res 41:642–650CrossRef
Zurück zum Zitat Schuurmans A, Rouwette R, Vonk N, Broers JW, Rijnsburger HA, Pietersen HS (2005) LCA of finer sand in concrete. Int J Life Cycle Assess 10:131–135CrossRef Schuurmans A, Rouwette R, Vonk N, Broers JW, Rijnsburger HA, Pietersen HS (2005) LCA of finer sand in concrete. Int J Life Cycle Assess 10:131–135CrossRef
Zurück zum Zitat Sheng G, Zhai J, Li Q, Li F (2007) Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in Portland cement. Fuel 86:2625–2631CrossRef Sheng G, Zhai J, Li Q, Li F (2007) Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in Portland cement. Fuel 86:2625–2631CrossRef
Zurück zum Zitat Shi C, Zheng K (2007) A review on the use of waste glasses in the production of cement and concrete. Resour Conserv Recycl 52:234–247CrossRef Shi C, Zheng K (2007) A review on the use of waste glasses in the production of cement and concrete. Resour Conserv Recycl 52:234–247CrossRef
Zurück zum Zitat Shi C, Meyer C, Behnood A (2008) Utilization of copper slag in cement and concrete. Resour Conserv Recycl 52:1115–1120CrossRef Shi C, Meyer C, Behnood A (2008) Utilization of copper slag in cement and concrete. Resour Conserv Recycl 52:1115–1120CrossRef
Zurück zum Zitat Shinzato MC, Hypolito R (2005) Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents. Waste Manag 25:37–47CrossRef Shinzato MC, Hypolito R (2005) Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents. Waste Manag 25:37–47CrossRef
Zurück zum Zitat Sisomphon K, Franke L (2007) Carbonation rates of concretes containing high volume of pozzolanic materials. Cem Concr Res 37:1647–1653CrossRef Sisomphon K, Franke L (2007) Carbonation rates of concretes containing high volume of pozzolanic materials. Cem Concr Res 37:1647–1653CrossRef
Zurück zum Zitat Teller P, Denis S, Renzoni R, Germain A, Delaisse P, d'Inverno H (2000) Use of LCI for the decision-making of a Belgian cement producer: a common methodology for accounting CO2 emissions related to the cement life cycle. 8th LCA Case Studies Symposium SETAC-Europe Teller P, Denis S, Renzoni R, Germain A, Delaisse P, d'Inverno H (2000) Use of LCI for the decision-making of a Belgian cement producer: a common methodology for accounting CO2 emissions related to the cement life cycle. 8th LCA Case Studies Symposium SETAC-Europe
Zurück zum Zitat Thomassen MA, Dalgaard R, Heijungs R, de Boer I (2008) Attributional and consequential LCA of milk production. Int J Life Cycle Assess 13:339–349CrossRef Thomassen MA, Dalgaard R, Heijungs R, de Boer I (2008) Attributional and consequential LCA of milk production. Int J Life Cycle Assess 13:339–349CrossRef
Zurück zum Zitat Tillman A-M, Ekvall T, Baumann H, Rydberg T (1994) Choice of system boundaries in life cycle assessment. J Clean Prod 2:21–29CrossRef Tillman A-M, Ekvall T, Baumann H, Rydberg T (1994) Choice of system boundaries in life cycle assessment. J Clean Prod 2:21–29CrossRef
Zurück zum Zitat Toledo Filho RD, Scrivener K, England GL, Ghavami K (2000) Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites. Cem Concr Comp 22:127–143CrossRef Toledo Filho RD, Scrivener K, England GL, Ghavami K (2000) Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites. Cem Concr Comp 22:127–143CrossRef
Zurück zum Zitat Turgut P (2007) Cement composites with limestone dust and different grades of wood sawdust. Build Environ 42:3801–3807CrossRef Turgut P (2007) Cement composites with limestone dust and different grades of wood sawdust. Build Environ 42:3801–3807CrossRef
Zurück zum Zitat UNSTATS (2010) Greenhouse gas emissions by sector (absolute values). United Nation Statistical Division, New York UNSTATS (2010) Greenhouse gas emissions by sector (absolute values). United Nation Statistical Division, New York
Zurück zum Zitat Weidema BP (2001) Avoiding co-product allocation in life cycle assessment. J Ind Ecol 4:11–33CrossRef Weidema BP (2001) Avoiding co-product allocation in life cycle assessment. J Ind Ecol 4:11–33CrossRef
Zurück zum Zitat Xing S, Xu Z, Jun G (2008) Inventory analysis of LCA on steel- and concrete-construction office buildings. Energy Build 40:1188–1193CrossRef Xing S, Xu Z, Jun G (2008) Inventory analysis of LCA on steel- and concrete-construction office buildings. Energy Build 40:1188–1193CrossRef
Zurück zum Zitat Yi Z-L, Sun H-H, Wei X-Q, Li C (2009) Iron ore tailings used for the preparation of cementitious material by compound thermal activation. Inter J Min Met Mater 16:355–358CrossRef Yi Z-L, Sun H-H, Wei X-Q, Li C (2009) Iron ore tailings used for the preparation of cementitious material by compound thermal activation. Inter J Min Met Mater 16:355–358CrossRef
Zurück zum Zitat Ziegler F, Hansson PA (2003) Emissions from fuel combustion in Swedish cod fishery. J Clean Prod 11:303–314CrossRef Ziegler F, Hansson PA (2003) Emissions from fuel combustion in Swedish cod fishery. J Clean Prod 11:303–314CrossRef
Metadaten
Titel
A method for allocation according to the economic behaviour in the EU-ETS for by-products used in cement industry
verfasst von
Guillaume Habert
Publikationsdatum
01.01.2013
Verlag
Springer-Verlag
Erschienen in
The International Journal of Life Cycle Assessment / Ausgabe 1/2013
Print ISSN: 0948-3349
Elektronische ISSN: 1614-7502
DOI
https://doi.org/10.1007/s11367-012-0464-1

Weitere Artikel der Ausgabe 1/2013

The International Journal of Life Cycle Assessment 1/2013 Zur Ausgabe

NON-TOXIC IMPACT CATEGORIES ASSOCIATED WITH EMISSIONS TO AIR, WATER, SOIL

Accounting for greenhouse gas emissions from the degradation of chemicals in the environment