Abstract
Flame propagating through zirconium particle cloud in a small-scale vertical rectangle chamber was investigated experimentally. In the experiments, the zirconium quoted 99% purity was used and the diameter of particles was distributed 1–22 μm. The zirconium dust was dispersed into the chamber by air flow and ignited by an electrode spark. A high-speed video camera was used to record the images of the propagating flame. Micro-thermocouples, schlieren optical system and microscopic lens were used to obtain temperature profiles and flame structure, respectively. Based on the experimental results, flame propagation characteristics and flame structure of zirconium particle cloud were analyzed. The propagation velocity of the flame is quite slow in the initial 14 ms and then accelerates to maximum value. Subsequently, the propagation velocity of the flame almost keeps constant. The combustion zone width of zirconium particle cloud is 5–6 mm. Smaller particles burn mainly at the leading edge of combustion zone in the width of 1.4 mm followed by larger particles burning 1.4–6 mm behind the leading edge of the combustion zone. Gas phase flame is not seen in zirconium particle cloud and the combustion time of single zirconium particle is 1–5 ms, which depends on its original size. The preheated zone is 7–8 mm thickness ahead of the combustion zone and intensive chemical reaction takes place at 490 K. The maximum flame temperature increases at lower concentrations, reaches the maximum value, and then decreases slightly at higher concentrations.
Similar content being viewed by others
References
Amyotte P R, Basu A, Khan F I. Dust explosion hazard of pulverized fuel carry-over. J Hazard Mater, 2005, 22: 23–30
Amyotte P R, Khan F I, Basu A, et al. Explosibility parameters for mixtures of pulverized fuel and ash. J Loss Prevent Proc, 2006, 19: 142–148
Cashdollar K L. Coal dust explosibility. J Loss Prevent Proc, 1996, 9: 65–76
Dahoe A E, Zevenbergen J F, Lemkowitz S M, et al. Dust explosions in spherical vessels: The role of flame thickness in the validity of the cube-root law. J Loss Prevent Proc, 1996, 9: 33–44
Matsuda T, Yashima M, Nifuku M, et al. Some aspects in testing and assessment of metal dust explosions. J Loss Prevent Proc, 2001, 14: 449–453
Siwek R. Determination of technical safety indices and factors influencing hazard evaluation of dust. J Loss Prevent Proc, 1996, 9: 21–31
Tamanini F, Valiulis J V. Improved guidelines for the sizing of vents in dust explosions. J Loss Prevent Proc, 1996, 9: 105–118
Chen J L, Dobashi R, Hirano T. Mechanisms of flame propagation through combustible particle clouds. J Loss Prevent Proc, 1996, 9: 225–229
Han O S, Yashima M, Matsuda T, et al. A study of flame propagation mechanisms in lycopodium dust clouds based on dust particles’ behavior. J Loss Prevent Proc, 2001, 14: 153–160
Ou-Sup H, Masaaki Y, Toei M, et al. Behavior of flames propagating through lycopodium dust clouds in a vertical duct. J Loss Prevent Proc, 2000, 13: 449–457
Seshadri K, Berlad A L, Tangirala V. The structure of premixed particle-cloud flames. Combust Flame, 1992, 89: 333–342
Sun J H, Dobashi R, Hirano T. Combustion behavior of iron particle suspended in air. Combust Sci Technol, 2000, 150: 99–114
Sun J H, Dobashi R, Hirano T. Concentration profile of particles across a flame propagating through an iron particle cloud. Combust Flame, 2003, 134: 381–387
Sun J H, Dobashi R, Hirano T. Structure of flames propagating through aluminum particles cloud and combustion process of particles. J Loss Prevent Proc, 2006, 19: 769–773
Chernenko E V, Rozenband V I, Batzykin V V. Study of zirconium ignition regularities in oxygen under pressure. Combust Explo Shock+, 1979, 15: 475–477
Gol’dshleger U I, Makarova EA, Rozenband V I. Trends in the ignition and combustion of zirconium.Combust Explo Shock+, 1977, 13: 257–260
Karpova N E, Goncharov E P, Kochetov O A. Critical conditions for self-ignition of magnesium and zirconium powders. Combust Explo Shock+, 1986, 22: 15–17
Proust C H, Veyssiere B. Fundamental properties of flames propagating in starch dust-air mixtures. Combust Sci Technol, 1988, 62: 149–172
Yi L, Sun J, Chen D. Flame propagation in hybrid mixture of coal dust and methane. J Loss Prevent Proc, 2007, 20: 691–697
Chen D L, Sun J H, Wang Q S, et al. Combustion behaviors and flame structure of methane/coal dust hybrid in a vertical rectangle chamber. Combust Sci Technol, 2008, 180: 1518–1528
Hironao H, Hideaki K, Takashi N. A numerical study of pulsating flame propagation in mixture of gas and particles. 28th international Symposium on Combustion, 2000 July 30–August 4, Edinburgh, Scotland. P Combust Inst, 2000, 28: 815–822
Ballantyne A, Moss J B. Fine wire thermocouple measurements of fluctuating temperature. Combust Sci Technol, 1977, 17: 63–72
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Ding, Y., Sun, J., He, X. et al. Flame propagation characteristics and flame structures of zirconium particle cloud in a small-scale chamber. Chin. Sci. Bull. 55, 3954–3959 (2010). https://doi.org/10.1007/s11434-010-4140-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-010-4140-1