Abstract
Yttria-stabilized zirconia and α-alumina films were prepared by laser chemical vapor deposition at deposition rates of several hundred micrometers per hour. Moreover, the structural oxide coatings by laser chemical vapor deposition are reviewed. The laser can significantly accelerate the chemical reaction and grain growth in CVD, yielding high deposition rates. The films contain large amounts of nanopores that act as thermal insulation and are thus promising as coating materials for gas turbine blades of Ni-based superalloys and WC-Co cutting tools.
Similar content being viewed by others
References
HIRAUI T, NIIHARA K, GOTO T. Rapid Chemical Vapour-deposition of Si3N4[J]. J. Mater. Sci., 1977, 12: 631–634
HIRAI T, GOTO T, KAJI T. Preparation of Silicon Carbide by Chemical Vapor Deposition[J]. Ceram. Soc. Japan, 1983, 91: 503–507
DUTY C, JEAN D, LACKEY WJ. Laser Chemical Vapour Deposition: Materials, Modelling, and Process Control[J]. Inter. Mater. Rev., 2001, 46: 271–274
KIMURA T, GOTO T. Rapid Synthesis of Yttria-stabilized Zirconia Films by Laser Chemical Vapor Deposition[J]. Mater. Trans., 2003, 44: 421–427
MIYAZAKI H, KIMURA T, GOTO T. Acceleration of Deposition Rates in a Chemical Vapor Deposition Process by Laser Irradiation[J]. Jpn. J. Appl. Phys., 2003, 42: L316-319
ZHANG S, TU R, GOTO T. High-Speed Epitaxial Growth of ß-SiC Film on Si(111) Single Crystal by Laser Chemical Vapor Deposition[J]. J. Amer. Ceram. Soc., 2012, 95: 2 782–2 785
KIMURA T, GOTO T. Rapid Synthesis of Yttria-stabilized Zirconia Films by Laser Chemical Vapor Deposition[J]. Mater. Trans., 2003, 44: 421–426
TU R, KIMURA T, GOTO T. Rapid Synthesis of Yttria-Partially-Stabilized Zirconia Films by Metal-Organic Chemical Vapor Deposition[J]. Mater. Trans., 2002, 43: 2 354–2 360
AKIYAMA Y, SATO T, IMANISHI N. Reaction Analysis for ZrO2 and Y2O3 Thin Film Growth by Low-Pressure Metalorganic Chemical Vapor Deposition Using b-Diketonate Complexes[J]. J. Cryst. Growth, 1995, 147: 130–135
PUVER M, NEMETZ W, WAHL G. CVD of ZrO2, Al2O3 and Y2O3 from Metalorganic Compounds in Different Reactors[J]. Surf. Coat. Tech., 2000, 125: 400–406
WAHL G, NEMETZ W, GIANNOZZI M, et al. Chemical Vapor Deposition of TBC: an Alternative Process for Gas Turbine Components[J]. Trans. ASME, 2001, 123: 520–529
BOURHIA N, FELTEN F, SENATEUR JP, et al. Deposition and Characterization of ZrO2 And Yttria-Stabilized ZrO2 Films using Injection-LPCVD[C]. Proc. 14th Conf. EUROCVD-11, 1997: 417–422
GOTO T. High-speed Deposition of Zirconia Films by Laser-induced Plasma CVD[J]. Solid State Ionics, 2004, 172: 225–230
LU T J, LEVI C G, WADLEY NNG, et al. Distributed Porosity as a Control Parameter for Oxide Thermal Barriers Mode by Physical Vapor Deposition[J]. J. Amer. Ceram. Soc., 2001, 84: 2 937
RUPPI S. Deposition, Microstructure and Properties of Texturecontrolled CVD a-Al2O3 Coatings[J]. Int. J.Refrac. Mat. Hard Mater., 2005, 23: 306–309
KADOKURA H, ITO A, KIMURA T, et al. Moderate Temperature and High-speed Synthesis of a-Al2O3 Films by Laser Chemical Vapor Deposition Using Nd:YAG Laser[J]. Surf. Coat. Tech., 2010, 204: 2 302–2 306
PARK C, KIM J, CHUN JS. The Effects of Reaction Parameters on the Deposition Characteristics in Al2O3 CVD[J]. J. Vac. Sci. Technol. A, 1983, 1: 1 820–1 825
RUPPI S, LARSSON A. Chemical Vapour Deposition of ?-Al2O3[J]. Thin Solid Films, 2001, 388: 50–58
MARUYAMA T, ARAI S. Aluminum Oxide Thin Films Prepared by Chemical Vapor Deposition from Aluminum Acetylacetonate[J]. Appl. Phys. Lett., 1992, 60: 322–330
DEVI A, SHIVASHANKAR S, SAMUELSON A. MOCVD of Aluminium Oxide Films Using Aluminiurn Beta-diketonates as Precursors[J]. J. Phys. IV, 2002, 12: 139–145
PFLITSCH C, VIEFHAUS D, BERGMANN U, et al. Organometallic Vapour Deposition of Crystalline Aluminium Oxide Films on Stainless Steel Substrates[J]. Thin Solid Films, 2007, 515: 3 653–3 658
HOLMAN WR, HUEGEL FJ. Interrelationships between Process Param-eters, Structure, and Properties of CVD Tungsten and Tungsten-Rhenium Alloys[J]. J. Vac. Sci. Technol., 1974, 11: 701–706
GOTO T, BANAL R, KIMURA T. Morphology and Preferred Orientation of Y2O3 Film Prepared by High-speed Laser CVD[J]. Surf. Coat Tech., 2007, 201: 5 776–5 782
GUO D, ITO A, GOTO T, et al. Effect of Laser Power on Orientation and Microstructure of TiO2 Films Prepared by Laser Chemical Vapor Deposition Method[J]. Mater. Lett., 2013, 93: 179–184
KATSUI H, GOTO T. Epitaxial Growth of (104)-and (018)-oriented LiCoO2 Films on MgO Single Crystals Prepared by Chemical Vapor Deposition[J]. Surf. Coat. Tech., 2013, 218: 57–62
KATSUI H, GOTO T. Preparation of Cubic and Tetragonal Li7La3Zr2O12 Film by Metal Organic Chemical Vapor Deposition[J]. Thin Solid Films, 2015, 584: 130–135
GUO D, ITO A, TU R, et al. Microstructure and Dielectric Response of (111)-oriented Tetragonal BaTiO3 Thick Films Prepared by Laser Chemical Vapor Deposition[J]. J. Asian Ceram. Soc., 2013, 1: 197–203
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Goto, T. A review: Structural oxide coatings by laser chemical vapor deposition. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 31, 1–5 (2016). https://doi.org/10.1007/s11595-016-1319-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-016-1319-6