Effect of Combined Addition of Cu and Aluminum Oxide Nanoparticles on Mechanical Properties and Microstructure of Al-7Si-0.3Mg Alloy

In this study, an ultrasonic cavitation based dispersion technique was used to fabricate Al-7Si-0.3Mg alloyed with Cu and reinforced with 1 wt pct Al₂O₃ nanoparticles, in order to investigate their influence on the mechanical properties and microstructures of Al-7Si-0.3Mg alloy. The combined addition of 0.5 pct Cu with 1 pct Al₂O₃ nanoparticles increased the yield strength, tensile strength, and ductility of the as-cast Al-7Si-0.3Mg alloy, mostly due to grain refinement and modification of the eutectic Si and θ-CuAl₂ phases. Moreover, Al-7Si-0.3Mg-0.5Cu-1 pct Al₂O₃ nanocomposites after T6 heat treatment showed a significant enhancement of ductility (increased by 512 pct) and tensile strength (by 22 pct). The significant enhancement of properties is attributed to the suppression of pore formation and modification of eutectic Si phases due to the addition of Al₂O₃ nanoparticles. However, the yield strength of the T6 heat-treated nanocomposites was limited in enhancement due to a reaction between Mg and Al₂O₃ nanoparticles.