nach oben

Metallurgical and Materials Transactions A

Erschienen in:

01.04.2014

Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys

verfasst von: Palash Poddar, Arpan Das, K. L. Sahoo

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 4/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper deals with the wear behavior of conventional cast Mg-Sn-based alloys. The alloys were studied through pin-on-disk wear test under four different loading conditions; namely, 9.8, 19.6, 29.4, and 39.2 N. The study highlights the cumulative wear loss, volumetric wear loss, dry sliding wear rate, and coefficient of friction of the alloys. The volumetric wear increased with increasing applied load. The wear mechanism was studied with scanning electron microscope. The wear occurs mainly by plowing mechanism and also by delamination. During wear, extensive plastic deformation and work hardening occurred. Microstructural analysis has been carried out for all the alloys at different loading conditions.

Vorheriger Artikel Phase Transformation and Morphology of Calcium Phosphate Prepared by Electrochemical Deposition Process Through Alkali Treatment and Calcination

Nächster Artikel Dry Sliding Wear Behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

B.L. Mordike and T. Ebert: Mater. Sci. Eng., 2001, vol. A302, pp. 37–45.CrossRef

P. Zhang: Scripta Mater., 2005, vol. 52, pp. 277–82.CrossRef

J.G. Wang, L.M. Hsiung, T.G. Nieh and M. Mabuchi: Mater. Sci. Eng. A., 2001, vol. A315, pp. 81–88.CrossRef

M.S. Yoo, K.S. Shin and N.J. Kim: Metall. Mater. Trans. A, 2004, vol. A35, pp. 1629–32.CrossRef

M.S. Yoo, Y.C. Kim, S. Ahn and N.J. Kim: Mater. Sci. Forum. 2003, vol. 419–422, pp. 419–24.CrossRef

D.H. Kang, M.S. Yoo, S.S. Park and N.J. Kim: Mater. Sci. Forum. 2005, vol. 475–479, pp. 521–24.CrossRef

M. Regev, E. Aghion, A. Rosen and M. Bamberger: Mater. Sci. Eng. A, 1998, vol. 252, pp. 6–16.CrossRef

A. Luo and M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259–71.CrossRef

D.H. Kang, S.S. Park, and N.J. Kim: Mater. Sci. Eng., 2005 vol. A413–414, pp. 555–60.

10.

H. Liu, Y. Chen, Y. Tang, S. Wei and G. Niu: J. Alloys Compd., 2007, vol. 440, pp. 122-26.CrossRef

11.

T. J. Chen, Y. Ma, B. Li, Y. D. Li and Y. Hao: Mater. Sci. Eng. A, 2007, vol. 445-446, pp. 477-85.CrossRef

12.

R. Jun, M. Ying, C. Jun, X. Tao, L. Dong, and L. Bing: Proceedings of the 4th China International Symposium on Tribology, 2004, pp. 285–91.

13.

J. An, R.G. Li, Y. Lu, C.M. Chen, Y. Xu, X. Chen and L.M. Wang: Wear, 2008, vol. 265, pp. 97-104.CrossRef

14.

L.A. Dobrzanski, T. Tanski, L. Cizek, and J. Domagala: J. Achieve. Mater. Manuf. Eng., 2008, vol. 31, pp. 83–90.

15.

Z. Yu, H.Y. Zhao, X.D. Hu, and D.Y. Ju: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. s318–s323.

16.

S. Anbu selvan, and S. Ramanathan: Mater. Des., 2010, vol. 31, pp. 1930–36.

17.

X. Lv, H. Liu, Y. Wang, Y. Lu, G. Li and J. An: J. Mater. Eng. Perform. 2011, vol. 20, pp. 1015–22.CrossRef

18.

K.M. Asl: Improving the Properties of Magnesium Alloys for High Temperature Applications, Magnesium Alloys – Design, Processing and Properties, F. Czerwinski, ed., ISBN: 978-953-307-520-4, in Tech.

19.

Z.C. Lu, M.Q. Zeng, Y. Gao and M. Zhu: Wear, 2013, vol. 304, pp. 162-72.CrossRef

20.

J. Xu, X. Wang, X. Zhu, M. Shirooyeh, J.W. Ngam, D. Shan, B. Guo and T.G. Langdon: J. Mater. Sci., 2013, vol. 48, pp. 4117-27.CrossRef

21.

C. Liang, C. Li, J. An, M. Yu, Y.C. Hu, W.H. Lin, F. Liu and Y.H. Ding: J. Mater. Eng. Perform., 2013, DOI:10.1007/s11665-013-0684-y.

22.

M. Cong, Z. Li, J. Liu and S. Li: Mater. Des., 2014, vol. 53, pp. 430-34.CrossRef

23.

P. Poddar and K.L. Sahoo: Mater. Sci. Eng. A, 2012, vol. 556, pp. 891-905.CrossRef

24.

P. Abachi, A. Masoudi and K. Purazrang: Mater. Sci. Eng. A, 2006, vol. 435-436, pp. 653-57.CrossRef

25.

D. Mandal, B.K. Dutta and S.C. Panigrahi: Mater. Sci. Eng. A, 2007, vol. 460-461, pp. 485-93.CrossRef

26.

S.C. Lim and M.F. Ashby: Acta. Metall., 1987, vol. 35, pp 1-24.CrossRef

27.

A. Das and P. Poddar: Mater. Des., 2013, vol. 47, pp. 557–65.CrossRef

28.

S. Lee, H.J. Ham, S.Y. Kwon, S.W. Kim and C.M. Suh: Int. J. Thermophys, 2012, DOI:10.1007/s10765-011-1145-1.

29.

C.-C. Yang, W.-M. Hsu and E. Chang: Mater. Sci. Technol., 1997, vol. 13, pp.687–94.CrossRef

30.

R.T. Spurr: Wear, 1979, vol. 55, pp. 289-93.CrossRef

31.

M. Roy, B. Venkataraman, V.V. Bhanuprasad, Y.R. Mahajan, and G. Sundararajan: Metall. Trans. A., 1992, vol. 23A, pp. 2833-47.CrossRef

32.

S. Jahanmir and N.P. Suh: Wear., 1977, vol. 44, pp. 17-38.CrossRef

33.

N.P. Suh: Wear., 1977, vol. 44, pp.1-16.CrossRef

34.

J.F. Archard: J. Appl. Phys., 1953, vol. 24, pp. 981-88.CrossRef

Titel: Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys
verfasst von: Palash Poddar
Arpan Das
K. L. Sahoo
Publikationsdatum: 01.04.2014
Verlag: Springer US
Erschienen in: Metallurgical and Materials Transactions A / Ausgabe 4/2014
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-013-2146-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2014

Austenite Formation in a Cold-Rolled Semi-austenitic Stainless Steel

Optimization of Solution Treatment of Cast Al-7Si-0.3Mg and Al-8Si-3Cu-0.5Mg Alloys

Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing

A Deformation Mechanism Map for the 1.23Cr-1.2Mo-0.26V Rotor Steel and Its Verification Using Neural Networks

Phase Transformation and Morphology of Calcium Phosphate Prepared by Electrochemical Deposition Process Through Alkali Treatment and Calcination

Microstructure and Mechanical Properties of Al-8 pct Si Alloy Prepared by Direct Chill Casting Under Electromagnetic and Ultrasonic Fields

Premium Partner

Marktübersichten