Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 8/2014

01.07.2014

Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach

verfasst von: Satoshi Semboshi, Shigeo Sato, Mikio Ishikuro, Kazuaki Wagatsuma, Akihiro Iwase, Takayuki Takasugi

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 8/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

We investigated the precipitation processes in Cu-4 mol pct Ti alloy specimens aged at 723 K (450 °C), by means of X-ray diffraction and chemical analyses of the precipitates extracted from the parent alloy specimens. Aging-induced precipitate particles of a spinodally decomposed disorder, α′; those of a metastable order, β′-Cu4Ti; and those of a stable order, β-Cu4Ti, were continuously formed in the aged specimens. The extraction of the precipitate particles from the aged specimens by submergence in a nitric solution allowed for not only the structural analyses of the constituent precipitate phases but also the quantitative evaluation of their chemical compositions and volume fractions. Early during the aging process, the supersaturated Cu solid solution decomposes spinodally in a continuous manner, and an unstable disorder, α′, appears. Then, fine needle-shaped β′-Cu4Ti particles, which have a Ti content of approximately 37.5 mol pct, form in the Cu matrix. During prolonged aging, coarse cellular components composed of the terminal Cu solid solution and stable β-Cu4Ti particles which have a Ti content of 20.5 mol pct nucleate and grow, primarily in the grain boundaries, at the expense of the metastable β′-Cu4Ti particles. The volume fraction of the β′-Cu4Ti particles in the alloy reaches a maximum of approximately 1.7 pct after aging for 24 hours, while that of the β-Cu4Ti particles increases steadily to more than 18 pct after 480 hours. The volume fraction of the fine β′-Cu4Ti particles in the alloy specimens remained constant throughout the age-hardening, indicating that the hardening is primarily owing to the fine dispersion of the β′-Cu4Ti particles and not because of the large volume fraction of coarse β-Cu4Ti particles.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat J.Y. Brun, S.J. Hamar-Thibault, and C.H. Allibert: Z. Metallk., 1983, vol. 74, pp. 525–29. J.Y. Brun, S.J. Hamar-Thibault, and C.H. Allibert: Z. Metallk., 1983, vol. 74, pp. 525–29.
2.
Zurück zum Zitat M.J. Saarivirta and H.S. Cannon: Met. Prog., 1959, vol. 76, pp. 81–84. M.J. Saarivirta and H.S. Cannon: Met. Prog., 1959, vol. 76, pp. 81–84.
3.
Zurück zum Zitat S. Nagarjuna, K. Balasubramanian, and D.S. Sarma: Mater. Trans. JIM, 1995, vol. 36, pp. 1058–66.CrossRef S. Nagarjuna, K. Balasubramanian, and D.S. Sarma: Mater. Trans. JIM, 1995, vol. 36, pp. 1058–66.CrossRef
4.
Zurück zum Zitat A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–89.CrossRef A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–89.CrossRef
5.
Zurück zum Zitat R. Markandeya, S. Nagarjuna, and D.S. Sarma: Mater. Sci. Eng. A, 2004, vol. 404, pp. 305–13.CrossRef R. Markandeya, S. Nagarjuna, and D.S. Sarma: Mater. Sci. Eng. A, 2004, vol. 404, pp. 305–13.CrossRef
6.
Zurück zum Zitat S. Nagarjuna and D.S. Sarma: J. Mater. Sci., 2002, vol. 37, pp. 1929-40.CrossRef S. Nagarjuna and D.S. Sarma: J. Mater. Sci., 2002, vol. 37, pp. 1929-40.CrossRef
7.
Zurück zum Zitat M. Sobhani, A. Mirhabibi, H. Arabi, and R.M.D. Brydson: Mater. Sci. Eng. A, 2013, vol. 577, pp. 16–22.CrossRef M. Sobhani, A. Mirhabibi, H. Arabi, and R.M.D. Brydson: Mater. Sci. Eng. A, 2013, vol. 577, pp. 16–22.CrossRef
8.
Zurück zum Zitat D. Bozic, J. Stasic, J. Ruzic, M. Vilotijevic, and V. Rajkovic: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8139-44.CrossRef D. Bozic, J. Stasic, J. Ruzic, M. Vilotijevic, and V. Rajkovic: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8139-44.CrossRef
9.
Zurück zum Zitat S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–77.CrossRef S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–77.CrossRef
10.
Zurück zum Zitat S. Semboshi, T. Nishida, and H. Numakura: Mater. Sci. Eng. A, 2009, vol. 517, pp. 105–13.CrossRef S. Semboshi, T. Nishida, and H. Numakura: Mater. Sci. Eng. A, 2009, vol. 517, pp. 105–13.CrossRef
11.
Zurück zum Zitat S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassab, and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2136–43.CrossRef S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassab, and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2136–43.CrossRef
12.
Zurück zum Zitat D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329–39.CrossRef D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329–39.CrossRef
13.
Zurück zum Zitat J.A. Cornie, A. Datta, and W.A. Soffa: Metall. Trans., 1973, vol. 4A, pp. 727–33.CrossRef J.A. Cornie, A. Datta, and W.A. Soffa: Metall. Trans., 1973, vol. 4A, pp. 727–33.CrossRef
14.
Zurück zum Zitat A. Datta A and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987–1001.CrossRef A. Datta A and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987–1001.CrossRef
15.
Zurück zum Zitat L.A. Nesbit and D.E. Laughlin: Acta Metall., 1978, vol. 26, pp. 815–25.CrossRef L.A. Nesbit and D.E. Laughlin: Acta Metall., 1978, vol. 26, pp. 815–25.CrossRef
16.
Zurück zum Zitat W.A. Soffa and D.E. Laughlin: Acta Metall., 1989, vol. 37, pp. 3019–28.CrossRef W.A. Soffa and D.E. Laughlin: Acta Metall., 1989, vol. 37, pp. 3019–28.CrossRef
17.
Zurück zum Zitat W.A. Soffa and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347–66.CrossRef W.A. Soffa and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347–66.CrossRef
18.
Zurück zum Zitat T.J. Konno, R. Nishio, S. Semboshi, T. Ohsuna, and E. Okunishi: J. Mater. Sci., 2008, vol. 43, pp. 3761–68.CrossRef T.J. Konno, R. Nishio, S. Semboshi, T. Ohsuna, and E. Okunishi: J. Mater. Sci., 2008, vol. 43, pp. 3761–68.CrossRef
19.
Zurück zum Zitat H.U. Pfeifer, S. Bhan, and K. Schubert: J. Less-Common Met., 1968, vol. 14, pp. 291–302.CrossRef H.U. Pfeifer, S. Bhan, and K. Schubert: J. Less-Common Met., 1968, vol. 14, pp. 291–302.CrossRef
20.
Zurück zum Zitat R.C. Ecob, J.V. Bee, B. Ralph: Phys. Status. Solidi. (a), 1979, vol. 52, pp. 201–10.CrossRef R.C. Ecob, J.V. Bee, B. Ralph: Phys. Status. Solidi. (a), 1979, vol. 52, pp. 201–10.CrossRef
21.
Zurück zum Zitat R.C. Ecob, J.V. Bee, and B. Ralph: Metall. Trans. A, 1980, vol. 11A, pp. 1407–14.CrossRef R.C. Ecob, J.V. Bee, and B. Ralph: Metall. Trans. A, 1980, vol. 11A, pp. 1407–14.CrossRef
22.
Zurück zum Zitat A.W. Thompson and J.C. Williams: Metall. Trans. A, 1983, vol. 15A, pp. 931–37. A.W. Thompson and J.C. Williams: Metall. Trans. A, 1983, vol. 15A, pp. 931–37.
23.
24.
Zurück zum Zitat A.K. Gupta, P.H. Marios, and D.J. Lloyd: Mater. Charact., 1996, vol. 37, pp. 61–80.CrossRef A.K. Gupta, P.H. Marios, and D.J. Lloyd: Mater. Charact., 1996, vol. 37, pp. 61–80.CrossRef
25.
Zurück zum Zitat T. Nagasaka, Y. Hishinuma, T. Muroga, Y. Li, H. Watanabe, H. Tanigawa, H. Sakasegawa, and M. Ando: Fusion. Eng. Des., 2011, vol. 86, pp. 2581-84.CrossRef T. Nagasaka, Y. Hishinuma, T. Muroga, Y. Li, H. Watanabe, H. Tanigawa, H. Sakasegawa, and M. Ando: Fusion. Eng. Des., 2011, vol. 86, pp. 2581-84.CrossRef
26.
Zurück zum Zitat A.L. Rivas, D.K. Matlock, and J.G. Speer: Mater. Charact., 2008, vol. 59, pp. 571–77.CrossRef A.L. Rivas, D.K. Matlock, and J.G. Speer: Mater. Charact., 2008, vol. 59, pp. 571–77.CrossRef
27.
Zurück zum Zitat M. Femandes, N. Cheung N, and A. Garcia: Mater. Charact., 2002, vol. 48, pp. 255–61.CrossRef M. Femandes, N. Cheung N, and A. Garcia: Mater. Charact., 2002, vol. 48, pp. 255–61.CrossRef
28.
Zurück zum Zitat Z. Rdzawski and J. Stobrawa: Scripta Metall., 1986, vol. 20, pp. 341–44.CrossRef Z. Rdzawski and J. Stobrawa: Scripta Metall., 1986, vol. 20, pp. 341–44.CrossRef
29.
Zurück zum Zitat M.Y.W. Lou and N.J. Grant: Metall. Trans. A, 1984, vol. 15A, pp. 1491–93.CrossRef M.Y.W. Lou and N.J. Grant: Metall. Trans. A, 1984, vol. 15A, pp. 1491–93.CrossRef
30.
Zurück zum Zitat S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, and T. Takasugi: Mater. Charact., 2013, vol. 82, pp. 23–31.CrossRef S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, and T. Takasugi: Mater. Charact., 2013, vol. 82, pp. 23–31.CrossRef
31.
Zurück zum Zitat S. Nagarjuna and M. Srinvivas: Mater. Sci. Eng. A, 2005, vol. 406, pp. 185–94.CrossRef S. Nagarjuna and M. Srinvivas: Mater. Sci. Eng. A, 2005, vol. 406, pp. 185–94.CrossRef
32.
33.
Zurück zum Zitat T. Souma and M. Ohtaki: J. Alloys Compd., 2006, vol. 413, pp. 289–97.CrossRef T. Souma and M. Ohtaki: J. Alloys Compd., 2006, vol. 413, pp. 289–97.CrossRef
34.
Zurück zum Zitat W.A. Johnson and R. F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416–17. W.A. Johnson and R. F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416–17.
36.
Zurück zum Zitat M.J. Richards and J.W. Cahn: Acta Metall., 1971, vol. 19, pp. 1263–77.CrossRef M.J. Richards and J.W. Cahn: Acta Metall., 1971, vol. 19, pp. 1263–77.CrossRef
37.
Zurück zum Zitat N. Karlsson: J. Inst. Met., 1951, vol. 78, pp. 391–405. N. Karlsson: J. Inst. Met., 1951, vol. 78, pp. 391–405.
38.
Metadaten
Titel
Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach
verfasst von
Satoshi Semboshi
Shigeo Sato
Mikio Ishikuro
Kazuaki Wagatsuma
Akihiro Iwase
Takayuki Takasugi
Publikationsdatum
01.07.2014
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 8/2014
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-014-2293-2

Weitere Artikel der Ausgabe 8/2014

Metallurgical and Materials Transactions A 8/2014 Zur Ausgabe

Symposium: Processing-Microstructure-PropertyRelationships & Deformation Mechanisms of Magnesium Alloys

Development of Very High Strength and Ductile Dilute Magnesium Alloys by Dispersion of Quasicrystal Phase

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.