Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 1/2008

01.02.2008

Flow Control with Local Electromagnetic Braking in Continuous Casting of Steel Slabs

verfasst von: Kevin Cukierski, Brian G. Thomas

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 1/2008

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A computational fluid flow model is applied to investigate the effects of varying submerged entry nozzle (SEN) submergence depth and electromagnetic brake (EMBr) field strength on flow in the mold cavity. The three-dimensional, steady K-ε model of the nozzle and liquid cavity in the mold used the magnetic induction method in FLUENT to incorporate the localized-type static EMBr field measured at a steel plant. The model was validated by comparing results with an analytical solution and with nail board and oscillation mark measurements collected at the plant. Increasing EMBr strength at a constant SEN depth is found to cause a deeper jet impingement, weaker upper recirculation zone and meniscus velocity, and a smaller meniscus wave. Increasing SEN depth without EMBr caused the same trends. Increasing SEN depth at a constant EMBr strength brought about the opposite: higher meniscus velocity, larger meniscus wave, and deeper penetration depth. Using the knowledge gained from this model, electromagnetic forces can be controlled to stabilize the fluid flow in the mold cavity and thereby minimize casting defects.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat World Steel in Figures, International Iron and Steel Institute, Brussels, Belgium, 2006, www.worldsteel.org World Steel in Figures, International Iron and Steel Institute, Brussels, Belgium, 2006, www.worldsteel.org
2.
Zurück zum Zitat M.M. Wolf: Steelmaking Conf. Proc., Toronto, 1992, ISS, Warrendale, PA, 1992, pp. 83–137 M.M. Wolf: Steelmaking Conf. Proc., Toronto, 1992, ISS, Warrendale, PA, 1992, pp. 83–137
3.
Zurück zum Zitat J. Herbertson: 74th Steelmaking Proc. of Iron & Steel Society, Washington, DC, 1991 J. Herbertson: 74th Steelmaking Proc. of Iron & Steel Society, Washington, DC, 1991
4.
Zurück zum Zitat K. Okazawa, T. Takehito, J. Fukuda, T. Kawase, M. Toki: ISIJ Int., 2001, vol. 41 (8), pp. 851–58CrossRef K. Okazawa, T. Takehito, J. Fukuda, T. Kawase, M. Toki: ISIJ Int., 2001, vol. 41 (8), pp. 851–58CrossRef
5.
Zurück zum Zitat H.R. Hackl, A.F. Lehman, J.E.A. Eriksson, and S.G. Kollberg: AISTech Preliminary Program, AIST, Warrendale, PA, 2006 H.R. Hackl, A.F. Lehman, J.E.A. Eriksson, and S.G. Kollberg: AISTech Preliminary Program, AIST, Warrendale, PA, 2006
6.
Zurück zum Zitat J. Nakashima, J.A. Kiyose, Y. Ohtani, J. Fukuda, T. Kawase, and M. Doki: Nippon Steel Technical Report No. 86, Nippon Steel, 2002, No. 86, pp. 61–67 J. Nakashima, J.A. Kiyose, Y. Ohtani, J. Fukuda, T. Kawase, and M. Doki: Nippon Steel Technical Report No. 86, Nippon Steel, 2002, No. 86, pp. 61–67
7.
Zurück zum Zitat T. Ishii, S.S. Sazhin, M. Makhlouf: Iron Steelmaking, 1996, vol. 23 (3), pp. 267–72 T. Ishii, S.S. Sazhin, M. Makhlouf: Iron Steelmaking, 1996, vol. 23 (3), pp. 267–72
8.
Zurück zum Zitat J. Kubota, K. Okimoto, A. Shirayama, and H. Murakami: 74th Steelmaking Conf. Proc., ISS-AIME, Warrendale, PA, 1991, pp. 233–38 J. Kubota, K. Okimoto, A. Shirayama, and H. Murakami: 74th Steelmaking Conf. Proc., ISS-AIME, Warrendale, PA, 1991, pp. 233–38
9.
Zurück zum Zitat P.H. Dauby, S. Kunstreich: Ironmaking and Steelmaking, 2005, vol. 32 (1), pp. 80–86CrossRef P.H. Dauby, S. Kunstreich: Ironmaking and Steelmaking, 2005, vol. 32 (1), pp. 80–86CrossRef
10.
Zurück zum Zitat P.M. Lofgren, P. Hanley: AISTech Conf. Proc., 2004, vol. 2, pp. 977–84 P.M. Lofgren, P. Hanley: AISTech Conf. Proc., 2004, vol. 2, pp. 977–84
11.
Zurück zum Zitat M.Y. Ha, H.G. Lee, and S.H. Seong: J. Mater. Process. Technol., 2003, vol. 133 (3), pp. 322–39CrossRef M.Y. Ha, H.G. Lee, and S.H. Seong: J. Mater. Process. Technol., 2003, vol. 133 (3), pp. 322–39CrossRef
12.
Zurück zum Zitat K. Takatani, K. Nakai, N. Kasai, T. Watanabe, H. Nakajima: ISIJ Int., 1989, vol. 29 (12), pp. 1063–68CrossRef K. Takatani, K. Nakai, N. Kasai, T. Watanabe, H. Nakajima: ISIJ Int., 1989, vol. 29 (12), pp. 1063–68CrossRef
13.
Zurück zum Zitat D.S. Kim, W.S. Kim, K.H. Cho: ISIJ Int., 2000, vol. 40 (7), pp. 670–76CrossRef D.S. Kim, W.S. Kim, K.H. Cho: ISIJ Int., 2000, vol. 40 (7), pp. 670–76CrossRef
14.
Zurück zum Zitat H. Harada, T. Toh, T. Ishii, K. Kaneko, E. Takeuchi: ISIJ Int., 2001, vol. 41 (10), pp. 1236–44CrossRef H. Harada, T. Toh, T. Ishii, K. Kaneko, E. Takeuchi: ISIJ Int., 2001, vol. 41 (10), pp. 1236–44CrossRef
15.
Zurück zum Zitat M. Zeze, H. Harada, E. Takeuchi, and T. Ishii: 76th Steelmaking Conf., Dallas, TX, Mar. 1993, pp. 267–72 M. Zeze, H. Harada, E. Takeuchi, and T. Ishii: 76th Steelmaking Conf., Dallas, TX, Mar. 1993, pp. 267–72
16.
Zurück zum Zitat A. Idogawa, M. Sugizawa, S. Takeuchi, K. Sorimachi, T. Fujii: Mater. Sci. Eng. A, 1993, vol. A173 (1–2), pp. 293–97 A. Idogawa, M. Sugizawa, S. Takeuchi, K. Sorimachi, T. Fujii: Mater. Sci. Eng. A, 1993, vol. A173 (1–2), pp. 293–97
17.
Zurück zum Zitat B. Li, T. Okane, T. Umeda: Metall. Trans. B, 2000, vol. 31B, pp. 1491–1503 B. Li, T. Okane, T. Umeda: Metall. Trans. B, 2000, vol. 31B, pp. 1491–1503
18.
Zurück zum Zitat B.G. Thomas, Q. Yuan, S. Sivaramakrishnan, T. Shi, S.P. Vanka, M.B. Assar: ISIJ Int., 2001, vol. 41 (10), pp. 1266–76 B.G. Thomas, Q. Yuan, S. Sivaramakrishnan, T. Shi, S.P. Vanka, M.B. Assar: ISIJ Int., 2001, vol. 41 (10), pp. 1266–76
19.
Zurück zum Zitat Q. Yuan, B. Zhao, S.P. Vanka, B.G. Thomas: Steel Res. Int., 2005, vol. 76 (1,Special Issue: Simulation of Fluid Flow in Metallurgy), pp. 33–43 Q. Yuan, B. Zhao, S.P. Vanka, B.G. Thomas: Steel Res. Int., 2005, vol. 76 (1,Special Issue: Simulation of Fluid Flow in Metallurgy), pp. 33–43
20.
Zurück zum Zitat Q. Yuan, S. Sivaramakrishnan, S.P. Vanka, B.G. Thomas: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 967–82CrossRef Q. Yuan, S. Sivaramakrishnan, S.P. Vanka, B.G. Thomas: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 967–82CrossRef
21.
Zurück zum Zitat B.E. Launder, D.B. Spalding: Mathematical Models of Turbulence, Academic Press, London, 1972, pp. 90–111 B.E. Launder, D.B. Spalding: Mathematical Models of Turbulence, Academic Press, London, 1972, pp. 90–111
22.
Zurück zum Zitat FLUENT6 .2-Manual, Fluent, Inc., Lebanon, NH, 2005 FLUENT6 .2-Manual, Fluent, Inc., Lebanon, NH, 2005
23.
Zurück zum Zitat D.E. Hershey, B.G. Thomas, F.M. Najjar: Int. J. Numer. Methods Fluids, 1993, vol. 17 (1), pp. 23–47CrossRef D.E. Hershey, B.G. Thomas, F.M. Najjar: Int. J. Numer. Methods Fluids, 1993, vol. 17 (1), pp. 23–47CrossRef
24.
Zurück zum Zitat Y. Meng, B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705CrossRef Y. Meng, B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705CrossRef
25.
Zurück zum Zitat B.T. Rietow: Master’s Thesis, University of Illinois at Urbana–Champaign, Urbana, IL, 2007 B.T. Rietow: Master’s Thesis, University of Illinois at Urbana–Champaign, Urbana, IL, 2007
26.
Zurück zum Zitat H. Bai, B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 253–67CrossRef H. Bai, B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 253–67CrossRef
28.
Zurück zum Zitat R. McDavid, B.G. Thomas: Metall. Trans. B, 1996, vol. 27B, pp. 672–85 R. McDavid, B.G. Thomas: Metall. Trans. B, 1996, vol. 27B, pp. 672–85
29.
Zurück zum Zitat E. Takeuchi, J.K. Brimacombe: Metall. Trans. B, 1984, vol. 15B, pp. 493–509CrossRef E. Takeuchi, J.K. Brimacombe: Metall. Trans. B, 1984, vol. 15B, pp. 493–509CrossRef
30.
Zurück zum Zitat R. Moreau: Magnetohydrodynamics, Kluwer Academic Pub. Co, Norwell, MA, 1990, pp. 110–64 R. Moreau: Magnetohydrodynamics, Kluwer Academic Pub. Co, Norwell, MA, 1990, pp. 110–64
31.
Zurück zum Zitat M.J. Cho, I.C. Kim, S.J. Kim, J.K. Kim: Trans. KSME, 1999, vol. 23B (13), pp. 1491–1502 M.J. Cho, I.C. Kim, S.J. Kim, J.K. Kim: Trans. KSME, 1999, vol. 23B (13), pp. 1491–1502
32.
Zurück zum Zitat K. Rackers and B.G. Thomas: 78th Steelmaking Conf. Proc., Nashville, TN, Apr. 2, 1995, ISS, Warrendale, PA, vol. 78, pp. 723–34 K. Rackers and B.G. Thomas: 78th Steelmaking Conf. Proc., Nashville, TN, Apr. 2, 1995, ISS, Warrendale, PA, vol. 78, pp. 723–34
33.
Zurück zum Zitat D.T. Creech: Master’s Thesis, University of Illinois at Urbana–Champaign, Urbana, IL, 1999 D.T. Creech: Master’s Thesis, University of Illinois at Urbana–Champaign, Urbana, IL, 1999
Metadaten
Titel
Flow Control with Local Electromagnetic Braking in Continuous Casting of Steel Slabs
verfasst von
Kevin Cukierski
Brian G. Thomas
Publikationsdatum
01.02.2008
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 1/2008
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-007-9109-3

Weitere Artikel der Ausgabe 1/2008

Metallurgical and Materials Transactions B 1/2008 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.