Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 2/2014

01.04.2014

Transient Asymmetric Flow and Bubble Transport Inside a Slab Continuous-Casting Mold

verfasst von: Zhongqiu Liu, Baokuan Li, Maofa Jiang

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 2/2014

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A one third scale water model experiment was conducted to observe the asymmetric flow and vortexing flow inside a slab continuous-casting mold. Dye-injection experiment was used to show the evolution of the transient flow pattern in the liquid pool without and with gas injection. The spread of the dye was not symmetric about the central plane. The flow pattern inside the mold was not stationary. The black sesames were injected into water to visualize the vortexing flow pattern on the top surface. The changes of shape and location of single vortex and two vortices with time had been observed during experiments. Plant ultrasonic testing (UT) of slabs was used to analyze the slab defects distribution, which indicated that the defects are intermittent and asymmetric. A mathematical model has been developed to analyze the time-dependent flow using the realistic geometries, which includes the submerged entry nozzle (SEN), actual mold, and part of the secondary cooling zone. The transient turbulent flow of molten steel inside the mold has been simulated using the large eddy simulation computational approach. Simulation results agree acceptably well with the water model experimentally observed and plant UT results. The oscillating motions of jet and the turbulence naturally promote the asymmetric flow even without the effects of slide gate nozzle or the existence of clogs inside the SEN. The periodic behavior of transient fluid flow in the mold is identified and characterized. The vortexing flow is resulted from asymmetric flow in the liquid pool. The vortices are located at the low-velocity side adjacent to the SEN, and the positions and sizes are different. Finally, the model is applied to investigate the influence of bubble size and casting speed on the time-dependent bubble distribution and removal fraction from the top surface inside the mold.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat B.G. Thomas, X. Huang, and R.C. Sussman: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 527-46.CrossRef B.G. Thomas, X. Huang, and R.C. Sussman: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 527-46.CrossRef
2.
Zurück zum Zitat R. Sánchez-Pérez, R.D. Morales, M. Díaz-Cruz, and M. Olivares-Xometl: ISIJ Int., 2003, vol. 43, pp. 637–46. R. Sánchez-Pérez, R.D. Morales, M. Díaz-Cruz, and M. Olivares-Xometl: ISIJ Int., 2003, vol. 43, pp. 637–46.
3.
Zurück zum Zitat K.H. Tacke: J. Iron. Steel Res. Int., 2011, vol.18, pp. 211-19. K.H. Tacke: J. Iron. Steel Res. Int., 2011, vol.18, pp. 211-19.
4.
Zurück zum Zitat G. Abbel, W. Damen, G. de Dendt, and W. Tiekink: ISIJ Int., 1996, vol. 36, pp. 219-22.CrossRef G. Abbel, W. Damen, G. de Dendt, and W. Tiekink: ISIJ Int., 1996, vol. 36, pp. 219-22.CrossRef
5.
Zurück zum Zitat H. Emling, T.A. Waugaman, S.L. Feldbauer, and A.W Cramb: Steelmaking Conference Proceedings, vol. 77, ISS, Warrendale, PA, 1994, pp. 371–79. H. Emling, T.A. Waugaman, S.L. Feldbauer, and A.W Cramb: Steelmaking Conference Proceedings, vol. 77, ISS, Warrendale, PA, 1994, pp. 371–79.
6.
Zurück zum Zitat B.G. Thomas, A. Denissov, and H. Bai: Steelmaking Conference Proceedings, vol. 80, ISS, Warrendale, PA, 1994, pp. 381–88. B.G. Thomas, A. Denissov, and H. Bai: Steelmaking Conference Proceedings, vol. 80, ISS, Warrendale, PA, 1994, pp. 381–88.
7.
8.
Zurück zum Zitat M. Iguchi, T. Chihara, N. Takanashi, Y. Ogawa, N. Tokumitsu, and Z. Morita: ISIJ Int., 35(1995), 1354.CrossRef M. Iguchi, T. Chihara, N. Takanashi, Y. Ogawa, N. Tokumitsu, and Z. Morita: ISIJ Int., 35(1995), 1354.CrossRef
9.
Zurück zum Zitat H. Bai and B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 1143-59.CrossRef H. Bai and B.G. Thomas: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 1143-59.CrossRef
10.
Zurück zum Zitat A. Ramos-Banderas, R.D. Morales, R. Sánchez-Pérez, L. García-Demedices, and G. Solorio-Diaz: Int. J. Multiphase Flow, 2005, vol. 31, pp. 643–65. A. Ramos-Banderas, R.D. Morales, R. Sánchez-Pérez, L. García-Demedices, and G. Solorio-Diaz: Int. J. Multiphase Flow, 2005, vol. 31, pp. 643–65.
11.
Zurück zum Zitat G.G. Lee, B.G. Thomas, and S.H. Kim: Met. Mater. Int., 2010, vol. 16B, pp. 501-06.CrossRef G.G. Lee, B.G. Thomas, and S.H. Kim: Met. Mater. Int., 2010, vol. 16B, pp. 501-06.CrossRef
12.
Zurück zum Zitat P. Naveau, H.H. Visser, J.M. Galpin, and G. Sussek: 5th European Continuous Casting Conference, Nice, France, 2005. P. Naveau, H.H. Visser, J.M. Galpin, and G. Sussek: 5th European Continuous Casting Conference, Nice, France, 2005.
13.
Zurück zum Zitat T. Miyake, M. Morishita, H. Nakata, and M. Kokita: ISIJ Int., 2006, vol. 46, pp. 1817-22.CrossRef T. Miyake, M. Morishita, H. Nakata, and M. Kokita: ISIJ Int., 2006, vol. 46, pp. 1817-22.CrossRef
14.
Zurück zum Zitat L. Wang, H.G. Lee, and P. Hayes: ISIJ Int., 1996, vol. 36, pp. 17-24.CrossRef L. Wang, H.G. Lee, and P. Hayes: ISIJ Int., 1996, vol. 36, pp. 17-24.CrossRef
15.
Zurück zum Zitat L. Zhang, S. Taniguchi, and K. Matsumoto: Ironmaking Steelmaking, 2002, vol. 29, pp. 326-36.CrossRef L. Zhang, S. Taniguchi, and K. Matsumoto: Ironmaking Steelmaking, 2002, vol. 29, pp. 326-36.CrossRef
16.
Zurück zum Zitat L. Zhang, J. Aoki, and B.G. Thomas: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 361-79.CrossRef L. Zhang, J. Aoki, and B.G. Thomas: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 361-79.CrossRef
17.
Zurück zum Zitat Q. Yuan, B.G. Thomas and S.P. Vanka: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 703-14.CrossRef Q. Yuan, B.G. Thomas and S.P. Vanka: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 703-14.CrossRef
18.
Zurück zum Zitat Q. Yuan: Ph.D. Thesis, University of Illinois at Urbana-Champaign, 2004. Q. Yuan: Ph.D. Thesis, University of Illinois at Urbana-Champaign, 2004.
19.
Zurück zum Zitat M. Javurek, P. Gittler, R. Rossler, B. Kaufmann and H. Preblinger: Steel Res. Int., 2005, vol.76, pp. 64-70. M. Javurek, P. Gittler, R. Rossler, B. Kaufmann and H. Preblinger: Steel Res. Int., 2005, vol.76, pp. 64-70.
20.
Zurück zum Zitat C. Pfeiler, B.G. Thomas, M. Wu, A. Ludwig and A.Kharicha: Steel Res. Int., 2006, vol.77, p. 1. C. Pfeiler, B.G. Thomas, M. Wu, A. Ludwig and A.Kharicha: Steel Res. Int., 2006, vol.77, p. 1.
21.
Zurück zum Zitat Y. Miki, H. Ohno, Y. Kishimoto, K. Furumai and S. Tanaka: Journal of Iron and Steel Research International, 2012, vol. 19, pp. 853-57. Y. Miki, H. Ohno, Y. Kishimoto, K. Furumai and S. Tanaka: Journal of Iron and Steel Research International, 2012, vol. 19, pp. 853-57.
22.
Zurück zum Zitat L. Zhang and Y. Wang: TMS Annual Meeting & Exhibition, TMS, Orlando, FL, 2012. L. Zhang and Y. Wang: TMS Annual Meeting & Exhibition, TMS, Orlando, FL, 2012.
23.
Zurück zum Zitat J. Knoepke, M. Hubbard, J. Kelly, R. Kittridge, and J. Lucas: Steelmaking Conference Proceedings, ISS, Warrendale, PA, 1994, vol. 77, pp. 381–88. J. Knoepke, M. Hubbard, J. Kelly, R. Kittridge, and J. Lucas: Steelmaking Conference Proceedings, ISS, Warrendale, PA, 1994, vol. 77, pp. 381–88.
24.
Zurück zum Zitat J. Herbertson, Q.L. He, P.J. Flint, and R.B. Mahapatra: Steelmaking Conference Proceedings, ISS, Warrendale, PA, 1991, vol. 74, pp. 171–85. J. Herbertson, Q.L. He, P.J. Flint, and R.B. Mahapatra: Steelmaking Conference Proceedings, ISS, Warrendale, PA, 1991, vol. 74, pp. 171–85.
25.
26.
Zurück zum Zitat Q. Yuan, B.G. Thomas, and S.P. Vanka: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 685–702.CrossRef Q. Yuan, B.G. Thomas, and S.P. Vanka: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 685–702.CrossRef
27.
28.
Zurück zum Zitat R. Chaudhary, C. Ji, B.G. Thomas, and S.P. Vanka: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 987-1007.CrossRef R. Chaudhary, C. Ji, B.G. Thomas, and S.P. Vanka: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 987-1007.CrossRef
29.
Zurück zum Zitat B.K. Li, Z.Q. Liu, F.S. Qi, F. Wang and G.D. Xu: Acta Metall. Sin., 2012, vol.48, pp. 23-32. B.K. Li, Z.Q. Liu, F.S. Qi, F. Wang and G.D. Xu: Acta Metall. Sin., 2012, vol.48, pp. 23-32.
30.
Zurück zum Zitat T. Robertson, P. Moore, and R.J. Hawkins: Ironmaking Steelmaking, 1986, vol. 13(4), pp. 195-203. T. Robertson, P. Moore, and R.J. Hawkins: Ironmaking Steelmaking, 1986, vol. 13(4), pp. 195-203.
31.
Zurück zum Zitat D. Gupta, S. Subramanian, and A.K. Lahiri: Steel Res., 1991, vol. 62(11), pp. 496-500. D. Gupta, S. Subramanian, and A.K. Lahiri: Steel Res., 1991, vol. 62(11), pp. 496-500.
32.
Zurück zum Zitat D. Gupta and A.K. Lahiri: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 757–64. D. Gupta and A.K. Lahiri: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 757–64.
33.
Zurück zum Zitat J.P. Birat, M. Larrecq, J.Y. Lamant, and J. Petegnief: Mold Operation for Quality and Productivity, Iron and Steel Society, Warrendale, PA, 1991, pp. 3-14. J.P. Birat, M. Larrecq, J.Y. Lamant, and J. Petegnief: Mold Operation for Quality and Productivity, Iron and Steel Society, Warrendale, PA, 1991, pp. 3-14.
34.
Zurück zum Zitat E. Torres-Alonso, R.D. Morales, L.G. Demedices, A. Nájera, J. Palafox-Ramos, and P. Ramírez-López: ISIJ Int., 2007, vol. 47, pp. 679–88. E. Torres-Alonso, R.D. Morales, L.G. Demedices, A. Nájera, J. Palafox-Ramos, and P. Ramírez-López: ISIJ Int., 2007, vol. 47, pp. 679–88.
35.
Zurück zum Zitat E. Torres-Alonso, J. Palafox-Ramos, P. Ramírez-López, and R.D. Morales: Steel Res. Int., 2008, vol. 79, pp. 553–63. E. Torres-Alonso, J. Palafox-Ramos, P. Ramírez-López, and R.D. Morales: Steel Res. Int., 2008, vol. 79, pp. 553–63.
36.
Zurück zum Zitat B.G. Thomas, L.J. Mika, and F.M. Najjar: Metall. Trans. B, 1990, vol. 21B, pp. 387–400.CrossRef B.G. Thomas, L.J. Mika, and F.M. Najjar: Metall. Trans. B, 1990, vol. 21B, pp. 387–400.CrossRef
37.
Zurück zum Zitat R. Chaudhary, G.G. Lee, B.G. Thomas, and S.H. Kim: Metall. Mater. Trans. B, 2008, vol. 39B, pp. 870–84.CrossRef R. Chaudhary, G.G. Lee, B.G. Thomas, and S.H. Kim: Metall. Mater. Trans. B, 2008, vol. 39B, pp. 870–84.CrossRef
38.
Zurück zum Zitat A. Ramos-Banderas, R. Sánchez-Pérez, R.D. Morales, J. Palafox-Ramos, L. Demedices-Garcia, and M. Diaz-Cruz: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 449–60. A. Ramos-Banderas, R. Sánchez-Pérez, R.D. Morales, J. Palafox-Ramos, L. Demedices-Garcia, and M. Diaz-Cruz: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 449–60.
39.
Zurück zum Zitat Q. Yuan, S. Sivaramakrishnan, S.P. Vanka, and B.G. Thomas: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 967–82.CrossRef Q. Yuan, S. Sivaramakrishnan, S.P. Vanka, and B.G. Thomas: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 967–82.CrossRef
40.
Zurück zum Zitat C. Real, R. Miranda, C. Vilchis, M. Barron, L. Hoyos, and J. Gonzalez: ISIJ Int., 2006, vol. 46, pp. 1183-91.CrossRef C. Real, R. Miranda, C. Vilchis, M. Barron, L. Hoyos, and J. Gonzalez: ISIJ Int., 2006, vol. 46, pp. 1183-91.CrossRef
41.
Zurück zum Zitat Z.Q. Liu, B.K. Li, M.F. Jiang and F. Tsukihashi. ISIJ Int., 2013, Vol. 53 (3), pp. 484–92.CrossRef Z.Q. Liu, B.K. Li, M.F. Jiang and F. Tsukihashi. ISIJ Int., 2013, Vol. 53 (3), pp. 484–92.CrossRef
42.
Zurück zum Zitat Y.H. Wang: Steelmaking Conference Proceedings, vol. 73, ISS, Warrendale, PA, 1991, pp. 473-80. Y.H. Wang: Steelmaking Conference Proceedings, vol. 73, ISS, Warrendale, PA, 1991, pp. 473-80.
44.
45.
Zurück zum Zitat R. Chaudhary, G.G. Lee, B.G. Thomas, S.M. Cho, S.H. Kim, and O.D. Kwon: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 300–15.CrossRef R. Chaudhary, G.G. Lee, B.G. Thomas, S.M. Cho, S.H. Kim, and O.D. Kwon: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 300–15.CrossRef
46.
Zurück zum Zitat B.K. Li, T. Okane, and T. Umeda: Metall. Mater. Trans. B, 2001, vol. 32, pp. 1053-66.CrossRef B.K. Li, T. Okane, and T. Umeda: Metall. Mater. Trans. B, 2001, vol. 32, pp. 1053-66.CrossRef
47.
48.
Zurück zum Zitat E. Torres-Alonso, R.D. Morales, S. Garcia-Hernández, and J. Palafox-Ramos: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 583-97.CrossRef E. Torres-Alonso, R.D. Morales, S. Garcia-Hernández, and J. Palafox-Ramos: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 583-97.CrossRef
49.
Zurück zum Zitat E. Torres-Alonso, R.D. Morales, and S. Garcia-Hernández: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 675-90.CrossRef E. Torres-Alonso, R.D. Morales, and S. Garcia-Hernández: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 675-90.CrossRef
50.
Zurück zum Zitat H. Yin, H.T. Tsai, and B. Forman: 6th European Conference on Continuous Casting, 2008, Riccione, Italy. H. Yin, H.T. Tsai, and B. Forman: 6th European Conference on Continuous Casting, 2008, Riccione, Italy.
51.
Zurück zum Zitat Y. Wang and L. Zhang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 1319-50.CrossRef Y. Wang and L. Zhang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 1319-50.CrossRef
Metadaten
Titel
Transient Asymmetric Flow and Bubble Transport Inside a Slab Continuous-Casting Mold
verfasst von
Zhongqiu Liu
Baokuan Li
Maofa Jiang
Publikationsdatum
01.04.2014
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 2/2014
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-013-9972-z

Weitere Artikel der Ausgabe 2/2014

Metallurgical and Materials Transactions B 2/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.