Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 5/2014

01.10.2014

Numerical Simulation of Desulfurization Behavior in Gas-Stirred Systems Based on Computation Fluid Dynamics–Simultaneous Reaction Model (CFD–SRM) Coupled Model

verfasst von: Wentao Lou, Miaoyong Zhu

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 5/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A computation fluid dynamics–simultaneous reaction model (CFD–SRM) coupled model has been proposed to describe the desulfurization behavior in a gas-stirred ladle. For the desulfurization thermodynamics, different models were investigated to determine sulfide capacity and oxygen activity. For the desulfurization kinetic, the effect of bubbly plume flow, as well as oxygen absorption and oxidation reactions in slag eyes are considered. The thermodynamic and kinetic modification coefficients are proposed to fit the measured data, respectively. Finally, the effects of slag basicity and gas flow rate on the desulfurization efficiency are investigated. The results show that as the interfacial reactions (Al2O3)-(FeO)-(SiO2)-(MnO)-[S]-[O] simultaneous kinetic equilibrium is adopted to determine the oxygen activity, and the Young’s model with the modification coefficient R th of 1.5 is adopted to determine slag sulfide capacity, the predicted sulfur distribution ratio LS agrees well with the measured data. With an increase of the gas blowing time, the predicted desulfurization rate gradually decreased, and when the modification parameter R k is 0.8, the predicted sulfur content changing with time in ladle agrees well with the measured data. If the oxygen absorption and oxidation reactions in slag eyes are not considered in this model, then the sulfur removal rate in the ladle would be overestimated, and this trend would become more obvious with an increase of the gas flow rate and decrease of the slag layer height. With the slag basicity increasing, the total desulfurization ratio increases; however, the total desulfurization ratio changes weakly as the slag basicity exceeds 7. With the increase of the gas flow rate, the desulfurization ratio first increases and then decreases. When the gas flow rate is 200 NL/min, the desulfurization ratio reaches a maximum value in an 80-ton gas-stirred ladle.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat F.D. Richardson and C.J.B. Fincham: J. Iron Steel Inst., 1954, vol. 178(9), pp. 4–15. F.D. Richardson and C.J.B. Fincham: J. Iron Steel Inst., 1954, vol. 178(9), pp. 4–15.
2.
Zurück zum Zitat C.J.B. Fincham and F.D. Richardon: Proc. R. Soc. Lond., 1954, vol. 223A, pp. 40–62. C.J.B. Fincham and F.D. Richardon: Proc. R. Soc. Lond., 1954, vol. 223A, pp. 40–62.
3.
Zurück zum Zitat D.J. Sosinsky and I.D. Sommerville: Metall. Trans. B, 1986, vol. 17B, pp. 331-7.CrossRef D.J. Sosinsky and I.D. Sommerville: Metall. Trans. B, 1986, vol. 17B, pp. 331-7.CrossRef
4.
Zurück zum Zitat R.W. Young, J.A. Duffy, G.J. Hassall, and Z. Xu: Ironmaking Steelmaking, 1992, vol. 19, no. 3, pp. 201-19. R.W. Young, J.A. Duffy, G.J. Hassall, and Z. Xu: Ironmaking Steelmaking, 1992, vol. 19, no. 3, pp. 201-19.
5.
Zurück zum Zitat M.M. Nzotta, S.C. Du, and S. Seetharaman: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 909-20.CrossRef M.M. Nzotta, S.C. Du, and S. Seetharaman: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 909-20.CrossRef
6.
Zurück zum Zitat M.M. Nzotta, S.C. Du, and S. Seetharaman: ISIJ Int., 1998, vol. 38, p. 1170.CrossRef M.M. Nzotta, S.C. Du, and S. Seetharaman: ISIJ Int., 1998, vol. 38, p. 1170.CrossRef
7.
Zurück zum Zitat S. Du, R. Nilsson, and S. Seetharaman: Steel Res., 1995, vol. 66, pp. 458-62. S. Du, R. Nilsson, and S. Seetharaman: Steel Res., 1995, vol. 66, pp. 458-62.
8.
Zurück zum Zitat A. Shankar, M. Gornerup, A.K. Lahiri, and S. Seetharaman: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 941-7.CrossRef A. Shankar, M. Gornerup, A.K. Lahiri, and S. Seetharaman: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 941-7.CrossRef
9.
Zurück zum Zitat Y. Taniguchi, N. Sano, and S. Seetharaman: ISIJ Int., 2009, vol. 49, no. 2, pp. 156-63.CrossRef Y. Taniguchi, N. Sano, and S. Seetharaman: ISIJ Int., 2009, vol. 49, no. 2, pp. 156-63.CrossRef
10.
Zurück zum Zitat C.B. Shi, X.M. Yang, J.S. Jiao, C. Li, and H.J. Guo: ISIJ Int., 2010, vol. 50, no. 10, pp. 1362-72.CrossRef C.B. Shi, X.M. Yang, J.S. Jiao, C. Li, and H.J. Guo: ISIJ Int., 2010, vol. 50, no. 10, pp. 1362-72.CrossRef
11.
12.
Zurück zum Zitat J. H. Park and G.H. Park: ISIJ Int., 2012, vol. 52, pp. 764-9. J. H. Park and G.H. Park: ISIJ Int., 2012, vol. 52, pp. 764-9.
13.
Zurück zum Zitat A.H. Chan and R.J. Fruehan: Metall. Trans. B, 1986, vol. 17B, pp. 491-6.CrossRef A.H. Chan and R.J. Fruehan: Metall. Trans. B, 1986, vol. 17B, pp. 491-6.CrossRef
14.
Zurück zum Zitat M.A.T. Andersson, P.G. Jönsson, and M.M. Nzotta: ISIJ Int., 1999, vol. 39, no. 11, pp. 1140-9.CrossRef M.A.T. Andersson, P.G. Jönsson, and M.M. Nzotta: ISIJ Int., 1999, vol. 39, no. 11, pp. 1140-9.CrossRef
15.
16.
Zurück zum Zitat H. Suito and R. Inoue: Physical Chemistry of Refining and Process Engineering, ISIJ, Tokyo, Japan, 1985, pp. 82-91. H. Suito and R. Inoue: Physical Chemistry of Refining and Process Engineering, ISIJ, Tokyo, Japan, 1985, pp. 82-91.
17.
Zurück zum Zitat P.K. Iwamasa and R.J. Fruehan: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 47-57.CrossRef P.K. Iwamasa and R.J. Fruehan: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 47-57.CrossRef
18.
Zurück zum Zitat D.R. Roy, P.C. Pistorius, and R.J. Fruehan: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1086-94.CrossRef D.R. Roy, P.C. Pistorius, and R.J. Fruehan: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1086-94.CrossRef
19.
Zurück zum Zitat D.R. Roy, P.C. Pistorius, and R.J. Fruehan: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1095-104.CrossRef D.R. Roy, P.C. Pistorius, and R.J. Fruehan: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1095-104.CrossRef
20.
Zurück zum Zitat E. Shibata, H.P. Sun, and K. Mori: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 279-86.CrossRef E. Shibata, H.P. Sun, and K. Mori: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 279-86.CrossRef
21.
Zurück zum Zitat N. EI-Kaddah and J. Szekely: Ironmak. Steelmak., 1981, vol. 8, pp. 269–78. N. EI-Kaddah and J. Szekely: Ironmak. Steelmak., 1981, vol. 8, pp. 269–78.
22.
Zurück zum Zitat M. Andersson, M. Hallberg, L. Jonsson, and P. Jönsson: Ironmaking Steelmaking, 2002, vol. 29, pp. 224-32.CrossRef M. Andersson, M. Hallberg, L. Jonsson, and P. Jönsson: Ironmaking Steelmaking, 2002, vol. 29, pp. 224-32.CrossRef
23.
Zurück zum Zitat L. Jonsson, S.C. Du, and P. Jönsson: ISIJ Int., 1998, vol. 38, pp. 260-7.CrossRef L. Jonsson, S.C. Du, and P. Jönsson: ISIJ Int., 1998, vol. 38, pp. 260-7.CrossRef
24.
Zurück zum Zitat M.A.T. Andersson, L.T.I. Jonsson, and P.G.P. Jönsson: ISIJ Int., 2000, vol. 40, pp. 1080-8.CrossRef M.A.T. Andersson, L.T.I. Jonsson, and P.G.P. Jönsson: ISIJ Int., 2000, vol. 40, pp. 1080-8.CrossRef
25.
Zurück zum Zitat M. Reifferscheid and W. Pluschkell: Steel Res., 1994, vol. 65, pp. 309-14. M. Reifferscheid and W. Pluschkell: Steel Res., 1994, vol. 65, pp. 309-14.
26.
27.
Zurück zum Zitat G.A. Brooks, M.A. Rhamdhani, K.S. Coley, Subagyo, and Y. Pan: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 353–62. G.A. Brooks, M.A. Rhamdhani, K.S. Coley, Subagyo, and Y. Pan: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 353–62.
28.
29.
Zurück zum Zitat R.H. Radzilowski and R.D. Pehlke: Metall. Trans. B, 1979, vol. 10B, pp. 341-8.CrossRef R.H. Radzilowski and R.D. Pehlke: Metall. Trans. B, 1979, vol. 10B, pp. 341-8.CrossRef
30.
Zurück zum Zitat M. Sano, H. Yetao, T. Sawada, and M. Kato: ISIJ Int., 1993, vol. 33, pp. 855-61.CrossRef M. Sano, H. Yetao, T. Sawada, and M. Kato: ISIJ Int., 1993, vol. 33, pp. 855-61.CrossRef
31.
Zurück zum Zitat H. Sun and R.D. Pehlke: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 854-64.CrossRef H. Sun and R.D. Pehlke: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 854-64.CrossRef
32.
Zurück zum Zitat R. Tsujino, J. Nakashima, M. Hirai, and Y. Yamada: ISIJ Int., 1989, vol. 29, no. 1, pp. 92-5.CrossRef R. Tsujino, J. Nakashima, M. Hirai, and Y. Yamada: ISIJ Int., 1989, vol. 29, no. 1, pp. 92-5.CrossRef
33.
Zurück zum Zitat D.G.C. Robertson, B. Deo, and S. Ohguchi: Ironmaking Steelmaking, 1984, vol. 11. pp. 41-53. D.G.C. Robertson, B. Deo, and S. Ohguchi: Ironmaking Steelmaking, 1984, vol. 11. pp. 41-53.
34.
Zurück zum Zitat X.M. Yang, C.B. Shi, M. Zhang, G.M. Chai, and F. Wang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 1150-80.CrossRef X.M. Yang, C.B. Shi, M. Zhang, G.M. Chai, and F. Wang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 1150-80.CrossRef
35.
Zurück zum Zitat W.T. Lou and M.Y. Zhu: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1251-63.CrossRef W.T. Lou and M.Y. Zhu: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1251-63.CrossRef
36.
Zurück zum Zitat J.C. Lamont and D.S. Scott: AIChE J., 1970, vol. 16, pp. 513–19. J.C. Lamont and D.S. Scott: AIChE J., 1970, vol. 16, pp. 513–19.
37.
Zurück zum Zitat B.D. Prasher and G.B. Wills: Ind. Eng. Chem. Process Des. Dev., 1973, vol. 12, pp. 351-4.CrossRef B.D. Prasher and G.B. Wills: Ind. Eng. Chem. Process Des. Dev., 1973, vol. 12, pp. 351-4.CrossRef
38.
Zurück zum Zitat Y. Kawase, B. Halard, and M. Moo-Young: Chem. Eng. Sci., 1987, vol. 42, pp. 1609-17.CrossRef Y. Kawase, B. Halard, and M. Moo-Young: Chem. Eng. Sci., 1987, vol. 42, pp. 1609-17.CrossRef
39.
Zurück zum Zitat R.J. Fruehan: The Making, Shaping and Treating of Steel, 11th ed., Steelmaking and Refining Volume, AISE, Pittsburgh, PA, 1998, p. 147. R.J. Fruehan: The Making, Shaping and Treating of Steel, 11th ed., Steelmaking and Refining Volume, AISE, Pittsburgh, PA, 1998, p. 147.
40.
Zurück zum Zitat J.A. Duffy and M.D. Ingram: J. Am. Chem. Soc., 1971, vol. 93, pp. 6448-55.CrossRef J.A. Duffy and M.D. Ingram: J. Am. Chem. Soc., 1971, vol. 93, pp. 6448-55.CrossRef
41.
Zurück zum Zitat The Japan Society for Promotion of Science: Selected Equilibrium Values for Steelmaking Reactions, The 19th Committee (Steelmaking), The Japan Society for Promotion of Science, Tokyo, Japan, 1984. The Japan Society for Promotion of Science: Selected Equilibrium Values for Steelmaking Reactions, The 19th Committee (Steelmaking), The Japan Society for Promotion of Science, Tokyo, Japan, 1984.
42.
Zurück zum Zitat C.R. Taylor and J. Chipman: Trans. AIME, 1943, vol. 154. pp. 228-47. C.R. Taylor and J. Chipman: Trans. AIME, 1943, vol. 154. pp. 228-47.
44.
Zurück zum Zitat S. Ban-ya, M. Hino, and H. Takezoe: Trans. Iron Steel Inst. Jpn., 1985, vol. 25, pp. 1122-31.CrossRef S. Ban-ya, M. Hino, and H. Takezoe: Trans. Iron Steel Inst. Jpn., 1985, vol. 25, pp. 1122-31.CrossRef
45.
Zurück zum Zitat S. Ban-ya, M. Hino, and A. Yuge: Tetsu-to-Hagané, 1985, vol. 71. pp. 853-60. S. Ban-ya, M. Hino, and A. Yuge: Tetsu-to-Hagané, 1985, vol. 71. pp. 853-60.
46.
Zurück zum Zitat T. Abel Engh: Principles of Metal Refining, Oxford University Press Inc., New York, NY, 1992. T. Abel Engh: Principles of Metal Refining, Oxford University Press Inc., New York, NY, 1992.
47.
Zurück zum Zitat K. Krishnapisharody and G.A. Irons: ISIJ. Int., 2008, vol. 48, pp. 1807-9.CrossRef K. Krishnapisharody and G.A. Irons: ISIJ. Int., 2008, vol. 48, pp. 1807-9.CrossRef
48.
Zurück zum Zitat F.P. Calderon, N. Sano, and Y. Matsushita: Metall. Trans. B, 1971, vol. 2B, pp. 3325-32.CrossRef F.P. Calderon, N. Sano, and Y. Matsushita: Metall. Trans. B, 1971, vol. 2B, pp. 3325-32.CrossRef
49.
Zurück zum Zitat M. Kawakami, S. Yokoyama, K. Takagi, M. Nishimura, and J.S. Kim: ISIJ Int., 1997, vol. 5, pp. 425-31.CrossRef M. Kawakami, S. Yokoyama, K. Takagi, M. Nishimura, and J.S. Kim: ISIJ Int., 1997, vol. 5, pp. 425-31.CrossRef
50.
Zurück zum Zitat P. Protopapas, H.C. Andersen, and N.A.D. Parlee: J. Chem. Phys., 1973, vol. 59, pp. 15-25.CrossRef P. Protopapas, H.C. Andersen, and N.A.D. Parlee: J. Chem. Phys., 1973, vol. 59, pp. 15-25.CrossRef
51.
Zurück zum Zitat J.X. Cheng: The Common Use Handbook of Diagram for Steelmaking, Metallurgical Industry Press, Beijing, China, 2010, pp. 840, 844, 850–51. J.X. Cheng: The Common Use Handbook of Diagram for Steelmaking, Metallurgical Industry Press, Beijing, China, 2010, pp. 840, 844, 850–51.
52.
Zurück zum Zitat VDEh: Slag Atlas, 2nd ed., Verlag Stahleisen GmbH, Dusseldorf, Germany, 1995, p. 11. VDEh: Slag Atlas, 2nd ed., Verlag Stahleisen GmbH, Dusseldorf, Germany, 1995, p. 11.
Metadaten
Titel
Numerical Simulation of Desulfurization Behavior in Gas-Stirred Systems Based on Computation Fluid Dynamics–Simultaneous Reaction Model (CFD–SRM) Coupled Model
verfasst von
Wentao Lou
Miaoyong Zhu
Publikationsdatum
01.10.2014
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 5/2014
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-014-0105-0

Weitere Artikel der Ausgabe 5/2014

Metallurgical and Materials Transactions B 5/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.