nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.03.2011

The Role of Surface Preparation Parameters on Cold Roll Bonding of Aluminum Strips

verfasst von: Roohollah Jamaati, Mohammad Reza Toroghinejad

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

It is the objective of this article to investigate the influence of surface preparation on the cold roll bonding (CRB) process. In this context, the effects of surface preparation parameters consisting of surface preparation method, surface roughness, scratch-brushing parameters, and the delay time between surface preparation and rolling are investigated on the bond strength of aluminum strips. The bond strength of two adjacent aluminum strips produced by the CRB process is evaluated by the peeling test. Furthermore, the interface region is investigated by metallographic observations. Our findings indicate that higher surface roughness values and shorter delay times improve the bond strength. It is also found that degreasing followed by scratch-brushing yield the best bonding properties.

Vorheriger Artikel Forming Simulation and Experimental Verification of Combined Formation of Selective Laser Sintering and Cold Isostatic Pressing

Nächster Artikel Casting-Based Production of Al-TiC-AlB2 Composite Material Through the Use of KBF4 Salt

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

D. Pan, K. Gao, and J. Yu, Cold Roll Bonding of Bimetallic Sheet and Strips, Mater. Sci. Technol., 1989, 5, p 934–939

N.D. Lukaschkin, A.P. Borissow, and A.I. Elrikh, The System Analysis of Metal Forming Technique in Welding Processes, J. Mater. Proc. Technol., 1997, 66, p 264–269CrossRef

H.Y. Wu, S. Lee, and J.Y. Wang, Solid State Bonding of Iron-Base Alloy, Steel-Brass and Aluminum Alloy, J. Mater. Proc. Technol., 1998, 75, p 173–179CrossRef

N. Bay, Cold Welding Part II, Process Variation and Application, Met. Construct., 1986, 18(6), p 486–490

L.R. Vaidyanath and D.R. Milner, Significance of Surface Preparation in Cold Pressure Welding of Metals, Br. Weld. J., 1960, 7, p 1–6

N. Bay and W. Zhang, Influence of Different Surface Preparation on the Bond Formation in Cold Pressure Welding, Proceeding of the Second European Conference on Joining Technology, Italy, 1994, p 379–388

C. Clemensen and O. Jalstrap, Cold Welding-Influence of Surface Preparation on Bond Strength, Met. Construct., 1986, 18(10), p 625–629

K. Thomas, Roll Welding, ASM Handbook, Welding, Brazing, and Soldering, Vol 6, ASM, Materials Park, OH, 1994, p 312–314

M.Z. Quadir, A. Wolz, M. Hoffman, and M. Ferry, Influence of Processing Parameters on the Bond Toughness of Roll-Bonded Aluminum Strip, Scr. Mater., 2008, 58, p 959–962CrossRef

10.

R. Jamaati and M.R. Toroghinejad, Investigation of the Parameters of the Cold Roll Bonding (CRB) Process, Mater. Sci. Eng., 2010, A527, p 2320–2326

11.

M. Abbasi and M.R. Toroghinejad, Effects of Processing Parameters on the Bond Strength of Cu/Cu Roll-Bonded Strips, J. Mater. Proc. Technol., 2010, 210, p 560–563CrossRef

12.

M. Eizadjou, H. Danesh Manesh, and K. Janghorban, Investigation of Roll Bonding Between Aluminum Alloy Strips, Mater. Des., 2008, 29, p 909–913CrossRef

13.

H. Danesh Manesh and A. Karimi Taheri, The Effect of Annealing Treatment on Mechanical Properties of Aluminum Clad Steel Sheet, J. Mater. Des., 2003, 24, p 617–622CrossRef

14.

M. Movahedi, H.R. Madaah Hosseini, and A.H. Kokabi, The Influence of Roll Bonding Parameters on the Bond Strength of Al-3003/Zn Soldering Sheets, Mater. Sci. Eng., 2008, A487, p 417–423

15.

K.J.B. McEwan and D.R. Miller, Pressure Welding of Dissimilar Metals, Br. Weld. J., 1962, 9, p 406–420

16.

J. Butlin and C.A. Mackay, Experiment on the Roll-Bonding of Tin Coatings to Non-Ferrous Substrate Sheet, Metal. Ind., 1979, p 1063–1072

17.

N. Bay, Cold Welding Part III, Influence of Surface Preparation on Bond Strength, Met. Construct., 1986, 18(6), p 625–629

18.

G. Krallics and J.G. Lenard, An Examination of the Accumulative Roll-Bonding Process, J. Mater. Proc. Technol., 2004, 152, p 154–161CrossRef

19.

M. Soltan Ali Nezhad and A. Haerian Ardakani, A Study of Joint Quality of Aluminum and Low Carbon Steel Strips by Warm Rolling, Mater. Des., 2009, 30, p 1103–1109CrossRef

20.

M. Alizadeh and M.H. Paydar, Study on the Effect of Presence of TiH₂ Particles on the Roll Bonding Behavior of Aluminum Alloy Strips, Mater. Des., 2009, 30, p 82–86CrossRef

21.

M. Eizadjou, H. Danesh Manesh, and K. Janghorban, Mechanism of Warm and Cold Roll Bonding of Aluminum Alloy Strips, Mater. Des., 2009, 30, p 4156–4161CrossRef

Titel: The Role of Surface Preparation Parameters on Cold Roll Bonding of Aluminum Strips
verfasst von: Roohollah Jamaati
Mohammad Reza Toroghinejad
Publikationsdatum: 01.03.2011
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2011
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-010-9664-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2011

Inhibition of Tryptophan on AA 2024 in Chloride-Containing Solutions

Texture Prediction of Cold- and Hot-Rolled Titanium Using Processing Path Model

Inhibition of Corrosion of 3003 Aluminum Alloy in Ethylene Glycol-Water Solutions

Induction Hardening 5150 Steel: Effects of Initial Microstructure and Heating Rate

Oxidation of Uncoated and Aluminized 9-12% Cr Boiler Steels at 550-650 °C

Box-Behnken Design of Experiments Investigation of Hydroxyapatite Synthesis for Orthopedic Applications

Premium Partner

Marktübersichten