nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.08.2011

Study on the Technology of Explosive Welding Incoloy800-SS304

verfasst von: Hui Zhao, Pingcang Li, Yinggang Zhou, Zhanghong Huang, Hunian Wang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this article, Incoloy800 and SS304 (304 stainless steel) were cladded by explosive welding. Accordingly, micro-hardness, tensile strength, shearing strength, bending properties, and SEM microstructure of cladding plate were examined in detail. The bonding interface of the plate showed a wavy morphology. Whereas, a different colorful area was observed at the wave ridge of the base layer either in optical or SEM pictures. Magnetic inspection showed that the colorful area was austenitic steel. Thus, the occurrence of the colorful areas seemed to be the result from the high deformation/cold working of the grains. EDX spectrum analysis and line scanning indicated that the diffusion through the bonding interface was not observed under the EDX and line scanning detection limitation. Micro-hardness, tensile, shearing, and bending testing results showed that the bonding strength was acceptable according to ASTM specification.

Vorheriger Artikel Effect of Ball Burnishing Process on the Surface Quality and Microstructure Properties of AISI 1010 Steel Plates

Nächster Artikel Effect of Pulse Parameters on Weld Quality in Pulsed Gas Metal Arc Welding: A Review

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

B.S. Yilbas, M. Khaled, M.A. Gondal, M. Ourfelli, Z. Khan, A. Al-Qutub, and B. El-Ali, Nano-Second Pulse Laser Treatment of Incoloy 800HT Alloy-Corrosion Properties, Opt. Lasers Eng., 1999, 32(2), p 157–172CrossRef

R. Dehmolaei, M. Shamanian, and A. Kermanpur, Microstructural Changes and Mechanical Properties of Incoloy800 After 15 years Service, Mater. Charact., 2009, 60(3), p 246–250CrossRef

A. Kermanpur, M. Shamanian, and V. Esfahani Yeganeh, Three-Dimensional Thermal Simulation and Experimental Investigation of GTAW Circumferentially Butt-Welded Incoloy 800 Pipes, J. Mater. Process. Technol., 2008, 199(1–3), p 295–303CrossRef

A.M. Iglesias and M.A.C. Raffo Calderon, Thermal Resistance Contributions of Oxides Growth on Incoloy 800 Steam Generator Tubes, Nucl. Eng. Des., 2003, 219(1), p 1–10CrossRef

R.C. Yin, Carburization Performance of Incoloy 800HT in CH₄/H₂ Gas Mixtures, Mater. Sci. Eng. A, 2004, 380(1–2), p 281–289

M. Fulger, D. Ohai, M. Mihalache, M. Pantiru, and V. Malinovschi, Oxidation Behavior of Incoloy 800 Under Simulated Supercritical Water Conditions, J. Nucl. Mater., 2009, 385(2), p 288–293CrossRef

R. Kacar and M. Acarer, An Investigation on the Explosive Cladding of 316L Stainless Steel-Din-P355GH Steel, J. Mater. Process. Technol., 2004, 152(1), p 91–96CrossRef

M.H. Keshavarz, Prediction of Detonation Performance of CHNO and CHNOAl Explosives Through Molecular Structure, J. Hazard. Mater., 2009, 166(2–3), p 1296–1301CrossRef

J. Yinon, Field Detection and Monitoring of Explosives, Trends Anal. Chem., 2002, 21(4), p 292–301CrossRef

10.

N. Kahraman and B. Gülenç, Microstructural and Mechanical Properties of Cu-Ti Plates Bonded Through Explosive Welding Process, J. Mater. Process. Technol., 2005, 169(1), p 67–71CrossRef

11.

S.A.A. Akbari-Mousavi, L.M. Barrett, and S.T.S. Al-Hassani, Explosive Welding of Metal Plates, J. Mater. Process. Technol., 2008, 202(1–3), p 224–239CrossRef

12.

D.L. Vonne, Procedure Development and Process Considerations for Explosion Welding, ASM Handbook, Materials Park, 1993, p 896–900

13.

S.A.A. Akbari Mousavi and P. Farhadi Sartangi, Experimental Investigation of Explosive Welding of cp-Titanium/AISI, 304 Stainless Steel, Mater. Des., 2009, 30(3), p 459–468CrossRef

14.

B. Gulenc, Investigation of Interface Properties and Weldability of Aluminum and Copper Plates by Explosive Welding Method, Mater. Des., 2008, 29(1), p 275–278CrossRef

15.

M. Acarer and B. Demir, An Investigation of Mechanical and Metallurgical Properties of Explosive Welded Aluminum-Dual Phase Steel, Mater. Lett., 2008, 62(25), p 4158–4160CrossRef

16.

M.B. Talawar, A.P. Agrawal, M. Anniyappan, D.S. Wani, M.K. Bansode, and G.M. Gore, Primary Explosives: Electrostatic Discharge Initiation, Additive Effect and Its Relation to Thermal and Explosive Characteristics, J. Hazard. Mater., 2006, 137(2), p 1074–1078CrossRef

17.

A.A. Akbari Mousavi, S.J. Burley, and S.T.S. Al-Hassani, Simulation of Explosive Welding Using the Williamsburg Equation of State to Model Low Detonation Velocity Explosives, Int. J. Impact Eng., 2005, 31(6), p 719–734CrossRef

18.

A. Durgutlu, B. Gülenç, and F. Findik, Examination of Copper/Stainless Steel Joints Formed by Explosive Welding, Mater. Des., 2005, 26, p 497–507CrossRef

Titel: Study on the Technology of Explosive Welding Incoloy800-SS304
verfasst von: Hui Zhao
Pingcang Li
Yinggang Zhou
Zhanghong Huang
Hunian Wang
Publikationsdatum: 01.08.2011
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2011
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-010-9712-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2011

Fatigue Behavior of Vitallium-2000 Plus Alloy for Orthopedic Applications

Comparison of Roller Burnishing Method with Other Hole Surface Finishing Processes Applied on AISI 304 Austenitic Stainless Steel

Finite Element Simulations for Investigating the Effects of Specimen Geometry in Superplastic Tensile Tests

Influence of Isothermal Bainite Transformation Time on Microstructure and Mechanical Properties of Hot-Dip Galvanized TRIP Steel

Mechanical Properties and Welding Power of Friction Stirred AA2024-T35 Joints

Microstructure and Dry Sliding Wear Behavior of Mg-Y-Zn Alloy Modified by Laser Surface Melting

Premium Partner

Marktübersichten