FE analysis on Deformation and Temperature Nonuniformity in Forming of AISI-5140 Triple Valve by Multi-Way Loading

In triple valve forming process by multi-way loading severely nonuniform deformation and temperature distributions are prone to occur, which may lead to poor forming quality and macro-micro defects. A 3D coupled thermo-mechanical rigid-viscoplastic finite element (FE) model for multi-way loading forming of AISI-5140 steel equal diameter triple valve was developed based on DEFORM-3D. Through comprehensive simulation and analysis, the influences of main process parameters on the forming process and nonuniformity of deformation and temperature were studied. The results showed that: (1) the degree of deformation nonuniformity decreased with the increase of the punch loading speed, initial temperature of billet, or the decrease of the friction factor; (2) the average temperature of forming body increased as the punch loading speed, initial temperature of billet and the friction increased, while the degree of temperature nonuniformity decreased with the increase of punch loading speed or decrease of initial billet temperature.