nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.03.2015

Effect of Nitrogen on Stress Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique

verfasst von: Anita Toppo, M. G. Pujar, C. Mallika, U. Kamachi Mudali, R. K. Dayal

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 3/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Stress corrosion cracking (SCC) studies were conducted on austenitic stainless steels with two different nitrogen contents (0.07 and 0.22 wt.% N) in boiling acidified sodium chloride medium using constant load technique. Progress of SCC was monitored using electrochemical noise (EN) technique to understand the effect of nitrogen addition on SCC initiation and propagation. With increase in nitrogen content, the characteristic frequency of corrosion events, f _n increased, whereas the characteristic charge, q decreased simultaneously indicating the increased stability of passive film resulting in higher resistance to SCC.

Vorheriger Artikel Microstructure, Texture, and Mechanical Property Analysis of Gas Metal Arc Welded AISI 304 Austenitic Stainless Steel

Nächster Artikel Effect of Titanium Addition and Cooling Rate on Primary α(Al) Grains and Tensile Properties of Al-Cu Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. Shaikh, T. Anita, R.K. Dayal, and H.S. Khatak, Effect of Metallurgical Variables on the Stress Corrosion Crack Growth Behavior of AISI, type 316LN Stainless Steel, Corros. Sci., 2010, 52, p 1146–1154CrossRef

Z. Begum, A. Poonguzhali, R. Basu, C. Sudha, H. Shaikh, R.V. Subba Rao, A. Patil, and R.K. Dayal, Studies of the Tensile and Corrosion Fatigue Behavior of Austenitic Stainless Steels, Corros. Sci., 2011, 53, p 1424–1432CrossRef

R.F.A. Jargelius-Pettersson, Electrochemical Investigation of the Influence of Nitrogen Alloying on Pitting Corrosion of Austenitic Stainless Steels, Corros. Sci., 1999, 41, p 1639–1664CrossRef

R.C. Newman and T. Shahrabi, The Effect of Alloyed Nitrogen or Dissolved Nitrate Ions on the Anodic Behavior of Austenitic Stainless Steel in Hydrochloric Acid, Corros. Sci., 1987, 27, p 827–838CrossRef

Y.X. Qiao, Y.G. Zheng, W. Ke, and P.C. Okafor, Electrochemical Behavior of High Nitrogen Stainless Steel in Acidic Solutions, Corros. Sci., 2009, 51, p 979–986CrossRef

Y.C. Lu, M.B. Ives, and C.R. Clayton, Synergism of Alloying Elements and Pitting Corrosion Resistance of Stainless Steels, Corros. Sci., 1993, 35, p 89–96CrossRef

U. Kamachi Mudali, B. Reynders, and M. Stratmann, Localised Corrosion Behavior of Fe-N Model Alloys, Corros. Sci., 1999, 41, p 179–189CrossRef

S. Ningshen, U. Kamachi Mudali, and R.K. Dayal, Mott-Schottky Analysis of Passive Films and Corrosion Behavior of Type 316LN Stainless Steels, Trans. Indian Inst. Met., 2002, 55, p 397–403

S. Ningshen, U. Kamachi Mudali, V.K. Mittal, and H.S. Khatak, Semiconducting and Passive Film Properties of Nitrogen-Containing Type 316LN Stainless Steels, Corros. Sci., 2007, 49, p 481–496CrossRef

10.

J.E. Truman, Effects of Nitrogen Alloying on Corrosion Behavior of High Alloy Steels, High Nitrogen Steels 1988 Conference Proceedings, The Institute of Metals, London, 1989, p 225–239

11.

A. Kendal, J.E. Truman, and K. Lomax, Properties of AISI 304 and AISI 316 Stainless Steel with Addition of 0.2% Nitrogen, High Nitrogen Steels 1988 Conference Proceedings, The Institute of Metals, London, 1989, p 405–413

12.

P. Smith, H.T. Gisborne, J.E. Truman, and G. Oakes, The Stress Corrosion Resistance of Non magnetic Stainless Steels Used in Oil Exploration, Proc. Int. Conf. New Developments in Stainless Steels, R. Lula, Ed., ASM, Materials Partk, OH, 1985, p 151–164

13.

H. Shaikh, G. Geogy, F. Schneider, K. Mummert, and H.S. Khatak, Stress Corrosion Crack Growth Studies on Nitrogen Added AISI, Type 316 Stainless Steel and Its Weld Metal in Boiling Acidified Sodium Chloride Solution Using the Fracture Mechanics Approach, Mater. Corros., 2000, 51, p 719–727CrossRef

14.

D.G. Chakrapani, Handbook of Case Histories of Failure Analysis, K.A. Esakul, Ed., ASM International, Metals Park, OH, 1993, p 305–307

15.

R.A. Cottis, Interpretation of Electrochemical Noise Data, Corrosion, 2001, 57, p 265–285CrossRef

16.

V.A. Tyagai, Electrochemcial Noise of Reversal Electrode Reactions, Electrochim. Acta, 1973, 18, p 229–230CrossRef

17.

M. Leban, Z. Bajt, and A. Legat, Detection and Differentiation Between Cracking Processes Based on Electrochemical and Mechanical Measurements, Electrochim. Acta, 2004, 49, p 2795–2801CrossRef

18.

J.G. Gonzalez-Rodriguez, V.M. Salinas-Bravo, E. Garcia-Ochoa, and A. Diaz-Sanchez, Use of Electrochemical Potential Noise to Detect Initiation and Propagation of Stress Corrosion Cracks in a 17-4PH Steel, Corrosion, 1997, 53, p 693–699CrossRef

19.

T. Anita, M.G. Pujar, H. Shaikh, R.K. Dayal, and H.S. Khatak, Assessment of Stress Corrosion Crack Initiation and Propagation in AISI, Type 316 Stainless Steel by Electrochemical Noise Technique, Corros. Sci., 2006, 48, p 2689–2710CrossRef

20.

H.S. Ahluwalia, Problems Associated with Slow Strain Rate Quality Assurance Testing of Nickel-Base Corrosion Resistant Alloy Tubulars in Hydrogen Sulfide Environments, Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, Issue 1210, R. D. Kane, Ed., ASTM International, p 225–239

21.

M. Bierwirth and J. Goellner, Modeling of Electrochemical Noise Transients, Mater. Corros., 2007, 58, p 992–996CrossRef

22.

W.J. Tobler and S. Virtanen, Effect of Mo Species on Metastable Pitting of Fe18Cr Alloys—A Current Transient Analysis, Corros. Sci., 2006, 48, p 1585–1607CrossRef

23.

J.M. Sanchez-Amaya, R.A. Cottis, and F.J. Botana, Shot Noise and Statistical Parameters for the Estimation of Corrosion Mechanism, Corros. Sci., 2005, 47, p 3280–3299CrossRef

24.

H.A.A. Al-Mazeedi and R.A. Cottis, A Practical Evaluation of Electrochemical Noise Parameters as Indicators of Corrosion Type, Electrochim. Acta, 2004, 49, p 2787–2793CrossRef

25.

A.M.P. Simoes and M.G.S. Ferreira, Crevice Corrosion Studies on Stainless Steel. Using Electrochemical Noise, Br. Corros. J., 1987, 22, p 21–25CrossRef

26.

M.G. Pujar, T. Anita, H. Shaikh, R.K. Dayal, and H.S. Khatak, Use of Electrochemical Noise (EN) Technique to Study the Effect of Sulfate and Chloride Ions on Passivation and Pitting Corrosion Behavior of 316 Stainless Steel, JMEP, 2007, 16, p 494–499CrossRef

27.

K. Fushumi, K. Takakura, H. Habazaki, H. Konno, K. Azumi, and S. Tsuri, Depassivation pH of Austenitic Stainless Steels in NaCl Aqueous Solution, ECS Trans., 2009, 16, p 291–296CrossRef

28.

Z. Shi, G. Song, C. Cao, H. Lin, and M. Lu, Electrochemical Potential Noise of 321 Stainless Steel Stressed Under Constant Strain Rate Testing Conditions, Electrochim. Acta, 2007, 52, p 2123–2133CrossRef

29.

H.S. Isaacs, The Localized Breakdown and Repair of Passive Surface During Pitting, Corros. Sci., 1989, 29, p 313–323CrossRef

30.

M. Janik-Czachor, E. Lunarska, and Z. Szklarska-Smialowska, Effect of Nitrogen Content in a 18Cr-5Ni-10Mn Stainless Steel on the Pitting Susceptibility in Chloride Solutions, Corrosion, 1975, 31, p 394–398CrossRef

31.

M.G. Pujar, U. Kamachi Mudali, and S.S. Singh, Electrochemical Noise Studies of the Effect of Nitrogen on Pitting Corrosion Resistance of High Nitrogen Austenitic Stainless Steels, Corros. Sci., 2011, 53, p 4178–4186CrossRef

32.

Y. Tang, X. Zhao, J. Mao, and Y. Zuo, The Electrochemical Characteristics of Pitting for Two Steels in Phosphate Buffer Solution with Chloride, Mater. Chem. Phys., 2009, 116, p 484–488CrossRef

33.

K. Sun, Effect of Stress Concentration Factors Due to Corrosion on Production String Design, SPE Product. Facil., 2005, 20, p 334–339CrossRef

34.

M.A. Meggiolaro and J.T. Pinhode Castro, On the Dominant Role of Crack Closure on Fatigue Crack Growth Modeling, Int. J. Fatigue, 2003, 25, p 843–854CrossRef

35.

Z. Mu, D. Chen, Z. Zhu, and B. Ye, The Stress Concentration Factor of Different Corrosion Pits Shape, Adv. Mater. Res., 2011, 152–153, p 1115–1119

36.

T. Nakai, H. Matsushita, N. Yamamoto, and H. Arai, Effect of Pitting Corrosion on Local Strength of Hold Frames of Bulk Carriers (1st Report), Mar. Struct., 2004, 17, p 403–432CrossRef

37.

M. Sivakumar and S. Rajeswari, Investigation of Failures in Stainless Steel Orthopedic Implant Devices: Pit-Induced Stress Corrosion Cracking, J. Mater. Sci. Lett., 1992, 11, p 1039–1042CrossRef

38.

G.S. Chen, K.C. Wan, M. Gao, R.P. Wei, and T.H. Flournoy, Transition from Pitting to Fatigue Crack Growth-Modeling of Corrosion Fatigue Crack Nucleation in a 2024-T3 Aluminum Alloy, Mater. Sci. Eng., 1996, A219, p 126–132CrossRef

39.

K.K. Sankaran, R. Perez, and K.V. Jata, Effects of Pitting Corrosion on the Fatigue Behavior of Aluminium Alloy 7075-T6: Modeling and Experimental Studies, Mater. Sci. Eng. A, 2001, 297, p 223–229CrossRef

40.

P.C. Searson and J.L. Dawson, Analysis of Electrochemical Noise Generated by Corroding Electrodes Under Open Circuit Conditions, J. Electrochem. Soc., 1988, 135, p 1908–1915CrossRef

41.

M.G. Pujar, N. Parvathavarthini, R.K. Dayal, and H.S. Khatak, Assessment of Galvanic Corrosion in Galvanic Couples of Sensitized and Nonsensitised AISI, Type 304 Stainless Steel in Nitric Acid, Int. J. Electrochem. Sci., 2008, 3, p 44–55

42.

T. Haruna, T. Shibata, and R. Toyota, The Effect of Potential on Initiation and Propagation of Stress Corrosion Cracks for Type 304l Stainless Steel in a Chloride Solution Containing Thiosulphate, Corros. Sci., 1997, 39, p 1873–1882CrossRef

43.

W.-T. Tsai, B. Reynders, M. Stratmann, and H.J. Grabke, The Effect of Applied Potential on the Stress Corrosion Cracking Behavior of High Nitrogen Steels, Corros. Sci., 1993, 34, p 1647–1656CrossRef

44.

X.S. Du, Y.J. Su, C. Zhang, J.X. Li, L.J. Qiao, W.Y. Chu, W.G. Chen, Q.S. Zhang, and D.X. Liu, Pre-strain Enhances Film Rupture to Promote SCC of Brass in Mattsson’s Solution—A Proposal for a Film-Rupture-Induced SCC Mechanism, Corros. Sci., 2013, 69, p 302–310CrossRef

45.

S.-I.I. Pyun, E.-J. Lee, and C.-H. Kim, Stochastic Approach to Analysis of Pitting Corrosion of Anodic Oxide Film on Al-1wt.%Si-0.5wt.%Cu Alloy, Surf. Coat. Technol., 1993, 62, p 480–485CrossRef

46.

A.W. Loginow and J.F. Bates, Corrosion, 1969, 25, p 15–22CrossRef

47.

R. Taillard and J. Foct, Proceedings of the First International Conference on High Nitrogen Steels “HNS 88”, Lille, May 1988, J. Foct and A. Hendry, Eds., The Institute of Metals, London, 1989, p. 387

48.

H. Leinonen and H. Hanninen, Stress Corrosion Cracking Susceptibility of Nitrogen Alloyed Stainless Steels in 50% CaCl₂ Solution, Mater. Sci. Forum, 1999, 318–320, p 545–552CrossRef

49.

Y.-S. Yoon, H.-Y. Ha, T.-H. Lee, and S. Kim, Effect of N and C on Stress Corrosion Cracking Susceptibility of Austenitic Fe18Cr10Mn-Based Stainless Steels, Corros. Sci., 2014, 80, p 28–36CrossRef

50.

U. Kamachi Mudali, R.K. Dayal, J.B. Gnanamoorthy, and P. Rodriguez, Pitting Corrosion Studies on Nitrogen Bearing Austenitic Stainless Steels, Mater. Trans. JIM, 1996, 37, p 1568–1573CrossRef

51.

U. Kamachi Mudali, R.K. Dayal, J.B. Gnanamoorthy, and P. Rodriguez, Role of Nitrogen in Improving the Passive Film Stability and Pitting Corrosion Resistance of Austenitic Stainless Steels, Trans. IIM, 1997, 50, p 37–47

52.

D. Kim, A Study of the Effect of Nitrogen and Molybdenum in the Corrosion Inhibition of Austenitic Stainless Steel, Report No. AD-A253 354, Ph.D. Dissertation, Materials Science and Engineering, State University of New York, Stony Brook, 1992, p 1–198

53.

H. Baba, T. Kodama, and Y. Katada, Corros. Sci., 2002, 44, p 2393–2407CrossRef

54.

C.L. Briant and A.M. Ritter, The Effect of Martensite on the Sensitization of Low Carbon 304 Stainless Steel, Metall. Trans. A, 1981, 12, p 910–913CrossRef

55.

P. Muraleedharan, H.S. Khatak, J.B. Gnanamoorthy, and P. Rodriguez, Effect of Cold Work on Stress Corrosion Cracking Behavior of Types 304 and 316 Stainless Steels, Metall. Trans., 1985, 16A, p 285–289CrossRef

56.

E.I. Meletis and R.F. Hochman, A Review of the Crystallography of Stress Corrosion Cracking, Corros. Sci., 1986, 26(63–77), p 79–90

Titel: Effect of Nitrogen on Stress Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique
verfasst von: Anita Toppo
M. G. Pujar
C. Mallika
U. Kamachi Mudali
R. K. Dayal
Publikationsdatum: 01.03.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 3/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1381-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2015

Residual Stress and Surface Energy of Sputtered TiN Films

Three-Dimensional Crystal Plasticity Finite Element Simulation of Hot Compressive Deformation Behaviors of 7075 Al Alloy

Synthesis and Hydrogen Desorption Properties of Mg1.7Al0.15Ti0.15Ni-CNT Nanocomposite Powder

Preparation and Characterization of Rutile-Type TiO2 Doped with Cu

Friction Stir Processing of Al-TiB2 In Situ Composite: Effect on Particle Distribution, Microstructure and Properties

Microstructure, Texture, and Mechanical Property Analysis of Gas Metal Arc Welded AISI 304 Austenitic Stainless Steel

Premium Partner

Marktübersichten