Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 6/2015

01.06.2015

Aluminum-Based Cast In Situ Composites: A Review

verfasst von: S. L. Pramod, Srinivasa R. Bakshi, B. S. Murty

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In situ composites are a class of composite materials in which the reinforcement is formed within the matrix by reaction during the processing. In situ method of composite synthesis has been widely followed by researchers because of several advantages over conventional stir casting such as fine particle size, clean interface, and good wettability of the reinforcement with the matrix and homogeneous distribution of the reinforcement compared to other processes. Besides this, in situ processing of composites by casting route is also economical and amenable for large scale production as compared to other methods such as powder metallurgy and spray forming. Commonly used reinforcements for Al and its alloys which can be produced in situ are Al2O3, AlN, TiB2, TiC, ZrB2, and Mg2Si. The aim of this paper is to review the current research and development in aluminum-based in situ composites by casting route.
Vorheriger Artikel Application of the Billet Casting Method to Determine the Onset of Incipient Melting of 319 Al Alloy Engine Blocks
Nächster Artikel Investigations on the Stress and Strain Evolution in AZ91D Magnesium Alloy Castings During Hot Tearing

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
A. Mandal, N. Chippa, K. Jayasankar, and P.S. Mukherjee, Effect of High Magnesium Content on Microstructure of Al-7Si Alloy, Mater. Lett., 2014, 117, p 168–170
2.
S. Fale, A. Likhite, and J. Bhatt, The Wear Behavior of In situ Al-AlN Metal Matrix Composites, Trans. Indian Inst. Met., 2014, 67, p 841–849
3.
X. Wu and G. Zhang, Microstructure and Dry Sliding Wear Behavior of Cast Al-Mg2Si In-Situ Metal Matrix Composite Modified by Nd, Rare Met., 2013, 32, p 284–289
4.
C.J. Song, Z.M. Xu, G. Liang, and J.G. Li, Study of In-Situ Al/Mg2Si Functionally Graded Materials by Electromagnetic Separation Method, Mater. Sci. Eng. A, 2006, 424, p 6–16
5.
P. Li, E.G. Kandalova, and V.I. Nikitin, In Situ Synthesis of Al-TiC in Aluminum Melt, Mater. Lett., 2005, 59, p 2545–2548
6.
H. Wang, G. Li, Y. Zhao, and G. Chen, In Situ Fabrication and Microstructure of Al2O3 Particles Reinforced Aluminum Matrix Composites, Mater. Sci. Eng. A, 2010, 527, p 2881–2885
7.
M.F. Najafabadi, M.A. Golozar, A. Saidi, and H. Edris, Wear Behaviour of Aluminium Matrix TiB2 Composite Prepared by In Situ Processing, Mater. Sci. Technol., 2014, 19, p 1531–1532
8.
K. Niranjan and P.R. Lakshminarayanan, Dry Sliding Wear Behaviour of In Situ Al-TiB2 Composites, Mater. Des., 2013, 47, p 167–173
9.
N. Soltani, H.R.J. Nodooshan, A. Bahrami, M.I. Pech-canul, W. Liu, and G. Wu, Effect of Hot Extrusion on Wear Properties of Al-15 wt.% Mg2Si In Situ Metal Matrix Composites, Mater. Des., 2014, 53, p 774–781
10.
S. Zhang, Y. Zhao, G. Chen, X. Cheng, and X. Huo, Fabrication and Dry Sliding Wear Behavior of In Situ Al-K 2ZrF6-KBF4 Composites Reinforced by Al3Zr and ZrB2 Particles, J. Alloys Compd., 2008, 450, p 185–192
11.
S. Kumar, V. Subramanya Sarma, and B.S. Murty, Effect of Temperature on the Wear Behavior of Al-7Si-TiB2 In-Situ Composites, Metall. Mater. Trans. A, 2008, 40, p 223–231
12.
A. Mandal, B.S. Murty, and M. Chakraborty, Sliding Wear Behaviour of T6 Treated A356-TiB2 In-Situ Composites, Wear, 2009, 266, p 865–872
13.
A. Mandal, M. Chakraborty, and B.S. Murty, Effect of TiB2 Particles on Sliding Wear Behaviour of Al-4Cu Alloy, Wear, 2007, 262, p 160–166
14.
J. Zhang, Z. Fan, Y. Wang, and B. Zhou, Microstructure and Mechanical Properties of In Situ Al-Mg2Si Composites, Scripta Mater., 2000, 16, p 913–918
15.
B. Basu and K. Balani, Advanced Structural Ceramics, Wiley, New York, 2011, ISBN 978-1-118-03729-4
16.
C. Barry Carter and M. Grant Norton, Ceramic Materials, Springer, New York, 2013, ISBN 978-1-4614-3523-5
17.
P. Davies, J.L.F. Kellie, D.P. Parton, London and Scandinavian, Co. Ld., Patent, 1993, WO 93/05189.
18.
A. Mandal, M. Chakraborty, and B.S. Murty, Ageing Behaviour of A356 Alloy Reinforced with In-Situ Formed TiB2 Particles, Mater. Sci. Eng. A, 2008, 489, p 220–226
19.
S. Lakshmi, L. Lu, and M. Gupta, In Situ Preparation of TiB2 Reinforced Al Based Composites, J. Mater. Pro. Tech., 1997, 73, p 160–166
20.
S. Kumar, M. Chakraborty, V. Subramanya Sarma, and B.S. Murty, Tensile and Wear Behaviour of In Situ Al-7Si/TiB2 Particulate Composites, Wear, 2008, 265, p 134–142
21.
N. Charbhai, B.S. Murty, and S. Sankaran, Characterization of Microstructure and Precipitation Behavior in Al-4Cu-xTiB2 In-Situ Composite, Trans. Indian Inst. Met., 2011, 64, p 117–121
22.
S.H. Nandam, S. Sankaran, and B.S. Murty, Precipitation Kinetics in Al-Si-Mg/TiB2 In-Situ Composites, Trans. Indian Inst. Met., 2011, 64, p 123–126
23.
G.S. Vinod Kumar, B.S. Murty, and M. Chakraborty, Development of Al-Ti-C Grain Refiners and Study of Their Grain Refining Efficiency on Al and Al-7Si Alloy, J. Alloys Compd., 2005, 396, p 143–150
24.
S. Kumar, V.S. Sarma, and B.S. Murty, Influence of In Situ Formed TiB2 Particles on the Abrasive Wear Behaviour of Al-4Cu Alloy, Mater. Sci. Eng. A, 2007, 465, p 160–164
25.
S. Kumar, V. Subramanya Sarma, and B.S. Murty, A Statistical Analysis on Erosion Wear Behaviour of A356 Alloy Reinforced with In Situ Formed TiB2 Particles, Mater. Sci. Eng. A, 2008, 476, p 333–340
26.
K.R. Ravi, M. Saravanan, R.M. Pillai, A. Mandal, B.S. Murty, M. Chakraborty, and B.C. Pai, Equal Channel Angular Pressing of Al-5 wt.%TiB2 In Situ Composite, J. Alloys Compd., 2008, 459, p 239–243
27.
S. Kumar, V. Subramaniya Sarma, and B.S. Murty, Functionally Graded Al Alloy Matrix In-Situ Composites, Metall. Mater. Trans. A, 2009, 41, p 242–254
28.
S. Kumar, V. Subramaniya Sarma, and B.S. Murty, The Influence of Room Temperature and Cryogenic Temperature Rolling on the Aging and Wear Behaviour of Al-4Cu-5TiB2 In Situ Composites, J. Alloys Compd., 2009, 479, p 268–273
29.
A. Mandal, B.S. Murty, and M. Chakraborty, Wear Behaviour of Near Eutectic Al-Si Alloy Reinforced with In-Situ TiB2 Particles, Mater. Sci. Eng. A, 2009, 506, p 27–33
30.
S. Kumar, V.S. Sarma, and B.S. Murty, High Temperature Wear Behavior of Al-4Cu-TiB2 In Situ Composites, Wear, 2010, 268, p 1266–1274
31.
Y. Zhang, N. Ma, H. Wang, Y. Le, and X. Li, Damping Capacity of In Situ TiB2 Particulates Reinforced Aluminium Composites with Ti Addition, Mater. Des., 2007, 28, p 628–632
32.
Y. Zhang, N. Ma, and H. Wang, Effect of particulate/Al interface on the damping behavior of in situ TiB2 reinforced aluminium composite, Mater. Lett., 2007, 61, p 3273–3275
33.
R. Shobha, K.R. Suresh, H.B. Niranjan, and K.G. Satyanarayana, Achieving Enhanced Mechanical Properties and Analysis of Chemical Kinetics of the In-Situ Reaction in an Al-TiB2 In-situ Composite, Adv. Mater. Res., 2010, 131, p 1385–1388
34.
H.B.M. Rajan, S. Ramabalan, I. Dinaharan, and S.J. Vijay, Effect of TiB2 Content and Temperature on Sliding Wear Behavior of AA7075 / TiB2 In Situ Aluminum Cast Composites, Arch. Civ. Mech. Eng., 2014, 14, p 72–79
35.
M. Wang, D. Chen, Z. Chen, Y. Wu, F. Wang, N. Ma, and H. Wang, Mechanical Properties of In-Situ TiB2/A356 Composites, Mater. Sci. Eng. A, 2014, 590, p 246–254
36.
Z. Chen, T. Wang, Y. Zheng, Y. Zhao, H. Kang, and L. Gao, Development of TiB2 Reinforced Aluminum Foundry Alloy Based In Situ Composites: Part I: An Improved Halide Salt Route to Fabricate Al-5 wt.%TiB2 Master Composite, Mater. Sci. Eng. A, 2014, 605, p 301–309
37.
J. Yao, S. Zhong, Z. Lei, and Z. Huoping, Mechanical Properties of Al-Si Alloy Based Composites Reinforced by In-Situ TiB2 Particles, Adv. Mater. Res., 2010, 105–106, p 126–129
38.
N.L. Yue, L. Lu, and M.O. Lai, Application of Thermodynamic Calculation in the In-Situ Process of Al/TiB2, Compos. Struct., 1999, 47, p 691–694
39.
B. Yang, Y.Q. Wang, and B.L. Zhou, The Mechanism of Formation of TiB2 Particulates Prepared by In Situ Reaction in Molten Aluminum, Met. Mater. Trans. B, 1998, 29, p 635–640
40.
D. Zhao, X. Liu, Y. LiU, and X. Bian, In Situ Preparation of Al Matrix Composites Reinforced by TiB2 Particles and Sub-micron ZrB2, J. Mater. Sci., 2005, 40, p 4365–4368
41.
L. Lu, M. La, and F.L. Chen, Al-4 wt% Cu Composite Reinforced with In-Situ TiB2 Particles, Acta Mater., 1997, 45, p 4297–4309
42.
Z.Y. Chen, Y.Y. Chen, Q. Shu, and G.Y. An, Solidification and Interfacial Structure of In Situ Al-4.5Cu/TiB2 Composite, J. Mater. Sci., 2000, 5, p 5605–5608
43.
A. Mandal, R. Maiti, M. Chakraborty, and B.S. Murty, Effect of TiB2 Particles on Aging Response of Al-4Cu Alloy, Mater. Sci. Eng. A, 2004, 386, p 296–300
44.
C.F. Feng and L. Froyen, Microstructures of In Situ Al/TiB2 MMCs Prepared, J. Mater. Sci., 2000, 5, p 837–850
45.
B.S. Murty, R. Maiti, and M. Chakraborty, Development of In-Situ Al-TiB2 Metal Matrix Composites, J. Met. Mater. Sci., 2001, 43, p 93–101
46.
K.L. Tee, L. Lu, and M.O. Lai, In Situ Processing of Al-TiB2 Composite by the Stir-Casting Technique, J. Mater. Proc. Tech., 1999, 90, p 513–519
47.
K.L. Tee, L. Lu, and M.O. Lai, In Situ Stir Cast Al-TiB2 Composite: Processing and Mechanical Properties, Mater. Sci. Tech., 2001, 17, p 201–206
48.
K.L. Tee, L. Lu, and M.O. Lai, Synthesis of In Situ Al-TiB2 Composites Using Stir Cast Route, Compos. Struct., 2000, 47, p 589–593
49.
A. Changizi, A. Kalkanli, and N. Sevinc, Production of In Situ Aluminum: Titanium Diboride Master Alloy Formed by Slag-Metal Reaction, J. Alloys Compd., 2011, 509, p 237–240
50.
L. Anestiev, L. Froyen, and L.V.A.N. Vugt, Kirkendall Effect in Liquid During the In Situ Processing of Metal Matrix Composites Under Micro-gravity Conditions, J. Mater. Sci., 2002, 7, p 1907–1913
51.
M.F. Forster, R.W. Hamilton, R.J. Dashwood, and P.D. Lee, Centrifugal Casting of Aluminium Containing In Situ Formed TiB2, Mater. Sci. Technol., 2003, 19, p 1215–1219
52.
C. Dengbin, Z. Yutao, L.I. Guirong, Z. Meng, and C. Gang, Mechanism and Kinetic Model of In-situ TiB2/7055Al Nanocomposites Synthesized Under High Intensity Ultrasonic Field, J. Wuhan Univ. Technol. Mater. Sci. Ed., 2011, 26, p 920–925
53.
C.S. Ramesh, A. Ahamed, B.H. Channabasappa, and R. Keshavamurthy, Development of Al 6063-TiB2 In Situ Composites, Mater. Des., 2010, 31, p 2230–2236
54.
Z. Liu, Q. Han, J. Li, and W. Huang, Effect of Ultrasonic Vibration on Microstructural Evolution of the Reinforcements and Degassing of In Situ TiB2p/Al-12Si-4Cu Composites, J. Mater. Process. Technol., 2012, 212, p 365–371
55.
T. Wang, Z. Chen, Y. Zheng, Y. Zhao, H. Kang, and L. Gao, Development of TiB2 Reinforced Aluminum Foundry Alloy Based In Situ Composites: Part II: Enhancing the Practical Aluminum Foundry Alloys Using the Improved Al-5 wt.%TiB2 Master Composite Upon Dilution, Mater. Sci. Eng. A, 2014, 605, p 22–32
56.
I.G. Siddhalingeshwar, M.A. Herbert, M. Chakraborty, and R. Mitra, Effect of Mushy State Rolling on Age-Hardening and Tensile Behavior of Al-4.5Cu Alloy and In Situ Al-4.5Cu-5TiB2 Composite, Mater. Sci. Eng. A, 2011, 528, p 1787–1798
57.
M.A. Herbert, C. Sarkar, R. Mitra, and M. Chakraborty, Microstructural Evolution, Hardness, and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy and In-Situ Al4.5Cu-5TiB2 Composite, Metall. Mater. Trans. A, 2007, 38, p 2110–2126
58.
J. Xue, J. Wang, Y.F. Han, and B.D. Sun, Wear Behaviour of Squeeze-Cast Al 2014 Alloy and In-Situ 5 vol% TiB2/2014 Composite, Mater. Trans., 2014, 53, p 2119–2128
59.
H. Yi, N. Ma, X. Li, Y. Zhang, and H. Wang, High-Temperature Mechanics Properties of In Situ TiB2p Reinforced Al-Si Alloy Composites, Mater. Sci. Eng. A, 2006, 419, p 12–17
60.
D.G. Zhao, X.F. Liu, Y.C. Pan, Y.X. Liu, and X.F. Bian, Microstructure and Mechanical Behavior of AlSiCuMgNi Piston Alloys Reinforced with TiB2, J. Mater. Sci., 2006, 41, p 4227–4232
61.
C.S. Ramesh, S. Pramod, and R. Keshavamurthy, A Study on Microstructure and Mechanical Properties of Al 6061-TiB2 In-Situ Composites, Mater. Sci. Eng. A, 2011, 528, p 4125–4132
62.
F. Wang, N. Ma, Y. Li, X. Li, and H. Wang, Impact Behavior of In Situ TiB2/Al Composite at Various Temperatures, J. Mater. Sci., 2011, 46, p 5192–5196
63.
F. Wang, J. Xu, J. Li, X. Li, and H. Wang, Fatigue Crack Initiation and Propagation in A356 Alloy Reinforced with In Situ TiB2 Particles, Mater. Des., 2012, 33, p 236–241
64.
Y. Zhang, N. Ma, H. Wang, Y. Le, and S. Li, Effect of Ti on the Damping Behavior of Aluminum Composite Reinforced with In Situ TiB2 Particulate, Scripta Mater., 2005, 53, p 1171–1174
65.
K. Sivaprasad, S.P.K. Babu, S. Natarajan, R. Narayanasamy, B.A. Kumar, and G. Dinesh, Study on Abrasive and Erosive Wear Behaviour of Al 6063/TiB2 In Situ Composites, Mater. Sci. Eng. A, 2008, 498, p 495–500
66.
S. Natarajan, R. Narayanasamy, S.P. Kumaresh Babu, G. Dinesh, B. Anil Kumar, and K. Sivaprasad, Sliding Wear Behaviour of Al 6063/TiB2 In Situ Composites at Elevated Temperatures, Mater. Des., 2009, 30, p 2521–2531
67.
C.S. Ramesh and A. Ahamed, Friction and Wear Behaviour of Cast Al 6063 Based In Situ Metal Matrix Composites, Wear, 2011, 271, p 1928–1939
68.
Y. Birol, In Situ Synthesis of Al-TiCp Composites by Reacting K2TiF6 and Particulate Graphite in Molten Aluminium, J. Alloys Compd., 2008, 454, p 110–117
69.
R. Bauri, Synthesis of Al-TiC In-Situ Composites: Effect of Processing Temperature and Ti:C Ratio, Trans. Indian Inst. Met., 2009, 62, p 391–395
70.
A. Sharma, Synthesis of TiC Composite by Salt Route and Grain Refinement of Aluminium Alloy, Int. J. Cast Metals Res., 2008, 21, p 226–230
71.
B. Sirahbizu, D. Venkateswarlu, M.M. Mahapatra, P.K. Jha, and N.R. Mandal, On Friction Stir Butt Welding of Al-12Si/10 wt% TiC In Situ Composite, Mater. Des., 2014, 54, p 1019–1027
72.
R.N. Rai, A.K.P. Rao, G.L. Dutta, and M. Chakraborty, Forming Behaviour of Al-TiC In-situ Composites, Mater. Sci. Forum, 2013, 765, p 418–422
73.
P. Sahoo and M.J. Koczak, Analysis of In Situ Formation of Titanium Carbide in Aluminum Alloys, Mater. Sci. Eng. A, 1991, 144, p 37–44
74.
F. Wang, H. Liu, and B. Yang, Effect of In-Situ TiC Particulate on the Wear Resistance of Spray-Deposited 7075 Al Matrix Composite, Mater. Char., 2005, 54, p 446–450
75.
Y. Cho, J. Lee, H. Kim, J. Kim, and S. Kim, Feasible Process for Producing In Situ Al/TiC Composites by Combustion Reaction in an Al Melt, Met. Mater. Int., 2013, 19, p 1109–1116
76.
B. Yang, F. Wang, H. Cui, X.J. Duan, S.C. Hu, and J.S. Zhang, TiC Particulate-Reinforced Al-20Si-5Fe Composite Fabricated by Melt In Situ Reaction Spray Forming, J. Mater Proc. Technol., 2003, 137, p 187–190
77.
Y.F. Liang, J.E. Zhou, and S.Q. Dong, Microstructure and Tensile Properties of In Situ TiCp/Al-4.5 wt.% Cu Composites Obtained by Direct Reaction Synthesis, Mater. Sci. Eng. A, 2010, 527, p 7955–7960
78.
Z. Liu, X. Wang, and Q. Han, Synthesis of Submicrometer-Sized TiC Particles in Aluminum Melt at Low Melting Temperature, J. Mater. Res., 2014, 29, p 896–901
79.
R. Tyagi, Synthesis and Tribological Characterization of In Situ Cast Al-TiC Composites, Wear, 2005, 259, p 569–576
80.
A. Kumar, P.K. Jha, and M.M. Mahapatra, Abrasive Wear Behavior of In Situ TiC Reinforced with Al-4.5%Cu Matrix, J. Mater. Eng. Perf., 2014, 23, p 743–752
81.
A. Kumar, M.M. Mahapatra, and P.K. Jha, Modeling the Abrasive Wear Characteristics of In-Situ Synthesized Al-4.5% Cu/TiC Composites, Wear, 2013, 306, p 170–178
82.
R.N. Rai, G.L. Datta, M. Chakraborty, and A.B. Chattopadhyay, A Study on the Machinability Behaviour of Al-TiC Composite Prepared by In Situ Technique, Mater. Sci. Eng. A, 2006, 428, p 34–40
83.
K. Tian, Y. Zhao, L. Jiao, S. Zhang, Z. Zhang, and X. Wu, Effects of In Situ Generated ZrB2 Nano-particles on Microstructure and Tensile Properties of 2024Al Matrix Composites, J. Alloys Compd., 2014, 594, p 1–6
84.
I. Dinaharan, N. Murugan, and S. Parameswaran, Influence of In Situ Formed ZrB2 Particles on Microstructure and Mechanical Properties of AA6061 Metal Matrix Composites, Mater. Sci. Eng. A, 2011, 528, p 5733–5740
85.
S. Zhang, Y. Zhao, G. Chen, and X. Cheng, Microstructures and Dry Sliding Wear Properties of In Situ (Al3Zr + ZrB2)/Al Composites, J. Mater. Proc. Technol., 2007, 184, p 201–208
86.
G.N. Kumar, R. Narayanasamy, S. Natarajan, S.P.K. Babu, K. Sivaprasad, and S. Sivasankaran, Dry Sliding Wear Behaviour of AA 6351-ZrB2 In Situ Composite at Room Temperature, Mater. Des., 2010, 31, p 1526–1532
87.
Q. Zheng and R.G. Reddy, Mechanism of In Situ Formation of AlN in Al Melt Using Nitrogen Gas, J. Mater Sci., 2004, 9, p 141–149
88.
Q. Zheng and R.G. Reddy, Kinetics of In-Situ Formation of AlN in Al Alloy Melts by Bubbling Ammonia Gas, Metall. Mater. Trans. B., 2003, 34, p 793–804
89.
Y. Huashun, J.D. Kim, and S.B. Kang, The Formation of AlN and TiN Particles During Nitrogen Bearing Gas Injection into Al-Mg-Ti Melt, Mater. Sci. Eng. A, 2004, 386, p 318–325
90.
S.S.S. Kumari, U.T.S. Pillai, and B.C. Pai, Synthesis and Characterization of In Situ Al-AlN Composite by Nitrogen Gas Bubbling Method, J. Alloys Compd., 2011, 509, p 2503–2509
91.
S. Fale, A. Likhite, and J. Bhatt, Nucleation Criteria for the Formation of Aluminum Nitride in Aluminum Matrix by Nitridation, Trans. Indian Inst. Met., 2013, 66, p 265–271
92.
K. Wang, C. Cui, Q. Wang, Y. Qi, and C. Wang, Fabrication of In Situ AlN-TiN/Al Inoculant and Its Refining Efficiency and Reinforcing Effect on Pure Aluminum, J. Alloys Compd., 2013, 547, p 5–10
93.
H. Wang, Y. Zhao, G. Li, and Z. Zhang, Characterization of (Al2O3) p/Al Composites In Situ Synthesized by Direct Melt Reaction Method, Adv. Mater. Res., 2011, 153, p 25–28
94.
B. Yang, M. Sun, G. Gan, C. Xu, Z. Huang, H. Zhang, and Z. Zak, In Situ Al2O3 Particle-Reinforced Al and Cu Matrix Composites Synthesized by Displacement Reactions, J. Alloys Compd., 2010, 494, p 261–265
95.
M. Hoseini and M. Meratian, Fabrication of In Situ Aluminum–Alumina Composite with Glass Powder, J. Alloys Compd., 2009, 471, p 378–382
96.
P.C. Maity, P.N. Chakraborty, and S.C. Panigrahi, Al-Al2O3 In Situ Particle Composites by Reaction of CuO Particles in Molten Pure Al, Mater. Lett., 1997, 30, p 147–151
97.
P.C. Maity, P.N. Chakraborty, and S.C. Panigrahi, Preparation of Al-Al2O3 In-Situ Particle Composites by Addition of Fe2O3 Particles to Pure Al Melt, J. Mater. Sci. Lett., 1997, 6, p 1224–1226
98.
B.S.S. Daniel and V.S.R. Murthy, Directed Melt Oxidation and Nitridation of Aluminium Alloys: A Comparison, Mater. Des., 1995, 16, p 155–161
99.
V.S.R. Murthy and B.S. Rao, Microstructural Development in the Directed Melt-Oxidized (DIMOX) AI-Mg-Si Alloys, J. Mater Sci., 1995, 30, p 3091–3097
100.
Y. Zhang, N. Ma, and H. Wang, Improvement of Yield Strength of LM24 Alloy, J. Mater. Des., 2014, 54, p 14–17
101.
D. Ko, G. Yu, J. Youn, and Y. Kim, Ultrasonic Effect on Refinement of Mg2Si and Mechanical Properties of In Situ Al-Mg2Si Composites, Adv. Mater. Res., 2009, 82, p 549–552
102.
R. Hadian, M. Emamy, N. Varahram, and N. Nemati, The Effect of Li on the Tensile Properties of Cast Al-Mg2Si Metal Matrix Composite, Mater. Sci. Eng. A, 2008, 490, p 250–257
103.
N. Liu, J. Li, and H. Li, Influence of Sb on Wear Resistance of In-Situ Mg2Si/Al-Si Composites, Adv. Mater. Res., 2011, 313, p 197–200
104.
M. Emamy, H.R.J. Nodooshan, and A. Malekan, The Microstructure, Hardness and Tensile Properties of Al-15% Mg2Si In Situ Composite with Yttrium Addition, Mater. Des., 2011, 32, p 4559–4566
105.
R. Khorshidi, A.H. Raouf, M. Emamy, and H.R.J. Nodooshan, The Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ Composite, Adv. Mater. Res., 2011, 313, p 283–286
106.
B. Cicek, H. Ahlatci, and Y. Sun, Wear Behaviours of Pb Added Mg-Al-Si Composites Reinforced with In Situ Mg2Si Particles, Mater. Des., 2013, 50, p 929–935
107.
Y. Zhao, Q. Qin, Y. Zhao, Y. Liang, and Q. Jiang, In Situ Mg2Si/Al-Si Composite Modified by K2TiF6, Mater. Lett., 2004, 58, p 2192–2194
108.
J. Zhang, Z. Fan, Y.Q. Wang, and B.L. Zhou, Microstructural Evolution of the In Situ Al-15 wt.% Mg2Si Composite with Extra Si Contents, Scripta Mater., 2000, 42, p 1101–1106
109.
J. Zhang, Z. Fan, Y. Wang, and B. Zhou, Microstructural Refinement in Mg2Si In Situ Composites, J. Mater. Sci. Let., 1999, 8, p 783–784
110.
J. Zhang, Y. Zhao, X. Xu, and X. Liu, Effect of Ultrasonic on Morphology of Primary Mg2Si in In-Situ Mg2Si/Al Composite, Trans. Nonferr. Soc. China, 2013, 23, p 2852–2856
111.
H. Ahlatci, A. Durmaz, A. Balta, M. Acarer, and E. Candan, Effect of Ti on the Corrosion Behaviour of In-Situ Mg2Si Particle Reinforced Al-12Si-20Mg-XTi Alloys Element Al Ti Si Mg, Mater. Sci. Forum, 2010, 637, p 511–516
112.
M. Emamy, R. Khorshidi, and A.H. Raouf, The Influence of Pure Na on the Microstructure and Tensile Properties of Al-Mg2Si Metal Matrix Composite, Mater. Sci. Eng. A, 2011, 528, p 4337–4342
113.
M. Emamy, A.R. Emami, R. Khorshidi, and M.R. Ghorbani, The Effect of Fe-Rich Intermetallics on the Microstructure, Hardness and Tensile Properties of Al-Mg2Si Die-Cast Composite, Mater. Des., 2013, 46, p 881–888
114.
E. Georgatis, A. Lekatou, A.E. Karantzalis, H. Petropoulos, S. Katsamakis, and A. Poulia, Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties, J. Mater. Eng. Perf., 2013, 22, p 729–741
115.
A. Malekan, M. Emamy, J. Rassizadehghani, and A.R. Emami, The Effect of Solution Temperature on the Microstructure and Tensile Properties of Al-15% Mg2Si Composite, Mater. Des., 2011, 32, p 2701–2709
116.
Y. Sun and H. Ahlatci, Mechanical and Wear Behaviors of Al-12Si-XMg Composites Reinforced with In Situ Mg2Si Particles, Mater. Des., 2011, 32, p 2983–2987
117.
X. Lin, C. Liu, and H. Xiao, Fabrication of Al-Si-Mg Functionally Graded Materials Tube Reinforced with In Situ Si/Mg2Si Particles by Centrifugal Casting, Compos. Part B, 2013, 45, p 8–21
118.
Y.G. Zhao, Q.D. Qin, Y.H. Liang, W. Zhou, and Q.C. Jiang, Mg2Si/Al-Si-Cu Composite Modified by Strontium, J. Mater Sci., 2005, 40, p 1831–1833
119.
R. Hadian, M. Emamy, and J. Campbell, Modification of Cast Al-Mg2Si Metal Matrix Composite by Li, Metall. Mater. Trans. B, 2009, 40, p 822–832
120.
N. Soltani, A. Bahrami, and M.I. Pech-canul, The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15% Mg2Si Composite, Metall. Mater. Trans. A, 2013, 44A, p 4366–4373
121.
W.U. Xiaofeng, Z. Guang, W.U. Fufa, and W. Zhe, Influence of Neodymium Addition on Microstructure, Tensile Properties and Fracture Behavior of Cast Al-Mg2Si Metal Matrix Composite, J. Rare Earths, 2013, 31, p 307–312
Metadaten
Titel
Aluminum-Based Cast In Situ Composites: A Review
verfasst von
S. L. Pramod
Srinivasa R. Bakshi
B. S. Murty
Publikationsdatum
01.06.2015
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 6/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-015-1424-2

Weitere Artikel der Ausgabe 6/2015

Journal of Materials Engineering and Performance 6/2015 Zur Ausgabe

OriginalPaper

Effects of HA-Coating on the Surface Morphology and Corrosion Behavior of a Co-Cr-Based Implant in Different Conditions

OriginalPaper

Effect of 0.3 wt.% Al Addition in Flowing Liquid Zinc on the Erosion-Corrosion Behavior of Fe-3.5 wt.% B Alloy

OriginalPaper

Experimental and Numerical Analysis of the 6061-Based Nanocomposites Fabricated via Ultrasonic Processing

OriginalPaper

A Comparative Study on the Dry Sliding Wear Behavior of Mild Steel and 6061Al-15wt.%SiCp Composite

OriginalPaper

Synthesis and Characteristics of ZnS Nanospheres for Heterojunction Photovoltaic Device

OriginalPaper

Inverse Thermal Analysis of Titanium GTA Welds Using Multiple Constraints

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise