nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.05.2015

Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling

verfasst von: S. V. S. Narayana Murty, Niraj Nayan, R. Madhavan, S. C. Sharma, K. M. George, Satyam Suwas

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The mechanism of grain refinement in a AZ31 Mg alloy subjected to hot groove rolling is investigated up to large strain (ε_t ~ 2.5). The alloy shows enhanced yield strength without compromising ductility. The change in strain path during rolling has resulted in significant weakening of basal texture. The microstructure analyses show that dynamic recrystallization (DRX) contributed significantly to grain refinement and hence to the observed mechanical properties. The combined effects of DRX and texture evolution on mechanical properties have been addressed.

Vorheriger Artikel D03 Ordered Phase Strengthening in Dual Phase Twinning-Induced Plasticity Steel

Nächster Artikel Composition Optimization and Experimental Characterization of a Novel Steel Based on CALPHAD

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

K.U. Kainer and F. Kaiser, Magnesium Alloys and Technology, Wiley, Weinheim, 2003CrossRef

M.M. Avedesian and H. Baker, ASM Specialty Handbook: Magnesium and Magnesium Alloys, ASM International, Materials Park, 1999

P. Patridge, Magnesium Alloys and Its Applications, Metall. Rev., 1967, 118, p 169–178

K. Kubota, M. Mabuchi, and K. Higashi, Review Processing and Mechanical Properties of Fine-Grained Magnesium Alloys, J. Mater. Sci., 1999, 34(10), p 2255–2262CrossRef

S. Suwas, G. Gottstein, and R. Kumar, Evolution of Crystallographic Texture During Equal Channel Angular Extrusion (ECAE) and Its Effects on Secondary Processing of Magnesium, Mater. Sci. Eng. A, 2007, 471(1–2), p 1–14CrossRef

S. Biswas, S.S. Dhinwal, and S. Suwas, Room-Temperature Equal Channel Angular Extrusion of Pure Magnesium, Acta Mater., 2010, 58(9), p 3247–3261CrossRef

J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi, The Activity of Non-basal Slip Systems and Dynamic Recovery at Room Temperature in Fine-Grained AZ31B Magnesium Alloys, Acta Mater., 2003, 51(7), p 2055–2065CrossRef

T. Mohri, M. Mabuchi, N. Saito, and M. Nakamura, Microstructure and Mechanical Properties of a Mg-4Y-3RE Alloy Processed by Thermo-Mechanical Treatment, Mater. Sci. Eng. A, 1998, 257(2), p 287–294CrossRef

T. Obara, H. Yoshinga, and S. Morozumi, {1122} <1123> Slip System in Magnesium, Acta Metall., 1973, 21(7), p 845–853CrossRef

10.

J.F. Stohr and J.P. Poirier, Electron-Microscope Study of Pyramidal Slip 1122 <1123> in Mg, Philos. Mag., 1972, 25(6), p 1313–1329CrossRef

11.

H. Watanabe, T. Mukai, K. Ishikawa, and K. Higashi, Low Temperature Superplasticity of a Fine-Grained ZK60 Magnesium Alloy Processed by Equal-Channel-Angular Extrusion, Scr. Mater., 2002, 46(12), p 851–856CrossRef

12.

M. Mabuchi, K. Ameyama, H. Iwasaki, and K. Higashi, Low Temperature Superplasticity of AZ91 Magnesium Alloy with Non-equilibrium Grain Boundaries, Acta Mater., 1999, 47(7), p 2047–2057CrossRef

13.

R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York, 1976

14.

M.H. Yoo, Slip, Twinning, and Fracture in Hexagonal Close-Packed Metals, Metall. Trans. A, 1981, 12(3), p 409–418CrossRef

15.

N. Ecob and B. Ralph, The Effect of Grain Size on Deformation Twinning in a Textured Zinc Alloy, J. Mater. Sci., 1983, 18(8), p 2419–2429CrossRef

16.

M.A. Meyers, O. Vöhringer, and V.A. Lubarda, The Onset of Twinning in Metals: A Constitutive Description, Acta Mater., 2001, 49(19), p 4025–4039CrossRef

17.

T. Mukai, T. Mohri, M. Mabuchi, M. Nakamura, K. Ishikawa, and K. Higashi, Experimental Study of a Structural Magnesium Alloy with High Absorption Energy Under Dynamic Loading, Scr. Mater., 1998, 39(9), p 1249–1253CrossRef

18.

S.R. Agnew, M.H. Yoo, and C.N. Tome, Application of Texture Simulation to Understanding Mechanical Behavior of Mg and Solid Solution Alloys Containing Li or Y, Acta Mater., 2001, 49, p 4277–4289CrossRef

19.

E. Yukutake, J. Kaneko, and M. Sugamata, Anisotropy and Non-uniformity in Plastic Behavior of AZ31 Magnesium Alloy Plates, Mater. Trans. JIM, 2003, 44(4), p 452–457CrossRef

20.

M.Y. Huh, S.Y. Cho, and O. Engler, Randomization of the Annealing Texture in Aluminum 5182 Sheet by Cross-Rolling, Mater. Sci. Eng. A, 2001, 315(1), p 35–46CrossRef

21.

S. Suwas and A.K. Singh, Role of Strain Path Change in Texture Development, Mater. Sci. Eng. A, 2003, 356(1), p 368–371CrossRef

22.

N.P. Gurao, S. Sethuraman, and S. Suwas, Effect of Strain Path Change on the Evolution of Texture and Microstructure During Rolling of Copper and Nickel, Mater. Sci. Eng. A, 2011, 528(25), p 7739–7750CrossRef

23.

N.P. Gurao, A. Ali, and S. Suwas, Study of Texture Evolution in Metastable β-Ti Alloy as a Function of Strain Path and Its Effect on α Transformation Texture, Mater. Sci. Eng. A, 2009, 504(1), p 24–35CrossRef

24.

S.E. Ion, F.J. Humphreys, and S.H. White, Dynamic Recrystallisation and the Development of Microstructure During The High Temperature Deformation of Magnesium, Acta Metall., 1982, 30(10), p 1909–1919CrossRef

25.

R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill, Physical Metallurgy Principles, Cengage Learning, Stamford, 2008

26.

F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 2004

27.

A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field, Electron Backscatter Diffraction in Materials Science, Springer, New York, 2009CrossRef

28.

T. Al-Samman and G. Gottstein, Influence of Strain Path Change on the Rolling Behavior of Twin Roll Cast Magnesium Alloy, Scr. Mater., 2008, 59(7), p 760–763CrossRef

29.

J. Bohlen, S.B. Yi, D. Letzig, and K.U. Kainer, Effect of Rare Earth Elements on the Microstructure and Texture Development in Magnesium–Manganese Alloys During Extrusion, Mater. Sci. Eng. A, 2010, 527, p 7092–7098CrossRef

30.

S. Biswas, S. Suwas, R. Sikand, and A.K. Gupta, Analysis of Texture Evolution in Pure Magnesium and the Magnesium Alloy AM30 During Rod and Tube Extrusion, Mater. Sci. Eng. A, 2011, 528(10), p 3722–3729CrossRef

31.

T. Al-Samman and G. Gottstein, Dynamic Recrystallization During High Temperature Deformation of Magnesium, Mater. Sci. Eng. A, 2008, 490(1), p 411–420CrossRef

32.

A. Galiyev, R. Kaibyshev, and G. Gottstein, Correlation of Plastic Deformation and Dynamic Recrystallization in Magnesium Alloy ZK60, Acta Mater., 2001, 49(7), p 1199–1207CrossRef

33.

S. Biswas, D.-I. Kim, and S. Suwas, Asymmetric and Symmetric Rolling of Magnesium: Evolution of Microstructure, Texture and Mechanical Properties, Mater. Sci. Eng. A, 2012, 550, p 19–30CrossRef

34.

S. Biswas and S. Suwas, Evolution of Sub-Micron Grain Size and Weak Texture in Magnesium Alloy Mg–3Al–0.4Mn by a Modified Multi-axial Forging Process, Scr. Mater., 2012, 66(2), p 89–92CrossRef

Titel: Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling
verfasst von: S. V. S. Narayana Murty
Niraj Nayan
R. Madhavan
S. C. Sharma
K. M. George
Satyam Suwas
Publikationsdatum: 01.05.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 5/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1459-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2015

Composition Optimization and Experimental Characterization of a Novel Steel Based on CALPHAD

Effect of Martensite Volume Fraction on Forming Limit Diagrams of Dual-Phase Steel

Phase Transformation and Aging Behavior of Al0.5CoCrFeNiSi0.2 High-Entropy Alloy

Microstructure, Mechanical and Corrosion Properties of Friction Stir-Processed AISI D2 Tool Steel

Microstructure, Mechanical, and Fatigue Strength of Ti-54M Processed by Rotary Swaging

Modeling the Effects of Processing Parameters on Dynamic Recrystallization Behavior of Deformed 38MnVS6 Steel

Premium Partner

Marktübersichten