nach oben

Journal of Materials Engineering and Performance

Erschienen in:

24.06.2016

Influence of Impact-Oscillatory Loading upon the Mechanical Properties of the VT-22 Titanium Alloy Sheet

verfasst von: M. G. Chausov, A. P. Pylypenko, V. B. Berezin, L. I. Markashova, O. S. Kushnariova, V. B. Hutsaylyuk

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This study shows the effect of the specific impact-oscillatory loading (Dynamical nonequilibrium process) on the VT-22 titanium α+β-type alloy mechanical properties and microstructure. Experiments were conducted using modified universal testing machine. Physical research revealed that significant microstructural refinement of the alloy is observed after such type of loading, as the result of which the fine grains are formed with subgrain refinement which takes place within the basis of alloy. It was found that overall plastic deformation of this alloy can be increased by a factor 2.75 compared with its initial state without significant loss of strength. Also we show that such process can be used as a preliminary microstructure refinement method for such alloy.

Vorheriger Artikel Effects of Ti and B Addition on Microstructures and Mechanical Properties of Hot-Rolled High-Strength Nb-Containing Steels

Nächster Artikel Preparing Al-Mg Substrate for Thermal Spraying: Evaluation of Surface State After Different Pretreatments

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

G. Nicolis and I. Prigogine, Self-Organization in Nonequilibrium Systems, Wiley, New York, 1977

D.M. Klimov, A.G. Petrov, and D.V. Georgievskii, Viscoplastic Flows: Dynamic Chaos, Stability, Mixing, Nauka, Moscow, 2005, p 394

M.G. Chausov, V.B. Berezin, A.P. Pylypenko, and V.B. Hutsaylyuk, Strain Field Evolution on the Surface of Aluminum Sheet Alloys Exposed to Specific Impact with Oscillation Loading, J. Strain Anal. Eng. Des., 2015, 50(1), p 61–72CrossRef

M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado, and T.R. McNelley, Microstructural Evolution in Adiabatic Shear Localization in Stainless Steel, Acta Mater., 2003, 51(5), p 1307–1325CrossRef

V. Hutsaylyuk, M. Chausov, L. Śnieżek, J. Torzewski, T. Slęzak, A. Pylypenko, and V. Berezin, Influence of Pre-Combined Loading on Mechanical Properties and Fracture Mechanism of Aluminum Alloy 2024-t3, 4th International Conference on Integrity, Reliability & Failure, June 23–27 2013(Funchal), pp 229–230.

M.G. Chausov, A.P. Pylypenko, V.B. Berezin, K.M. Volyanska, P.O. Maruschak, V.B. Hutsaylyuk, L.I. Markashova, S.A. Nedoseka, and A. Meno, Vplyv udarno-kolyvalnoho navantazhennia na zminu struktury i vykhidni mekhanichni vlastyvosti plastychnykh materialiv (Influence of Impact-Oscillatory Loading on Structural Changes and Initial Mechanical Properties of Ductile Materials), International Conference “In-Service Damage of Materials, its Diagnostics and Prediction”, Sept 21 2015(Ternopil), pp. 39–40 (in Ukranian).

N.G. Chausov, D.G. Voityuk, A.P. Pilipenko, and A.M. Kuz’menko, Setup for Testing Materials with Plotting Complete Stress-Strain Diagrams, Strength Mater., 2004, 36(5), p 532–537CrossRef

N.G. Chausov and A.P. Pilipenko, Influence of Dynamic Overloading on Fracture Kinetics of Metals at the Final Stages of Deformation, Mechanika, 2004, 48, p 13–18

Y.F. Darovskiy, L.I. Markashova, and N.P. Abramov, Metodika utoneniya obrazcov raznorodnyh svarnyh soedineniy dlya elektronno mikroskopicheskih issledovaniy (Methodics of Thinning of Welded Joints for Electron Microscopy Studies), Avtom. Svarka, 1985, 12, p 60 (in Russian)

10.

P. Hirsh, A. Howie, and R. Nicholson, Electron Microscopy of Thin Crystals, Mir, Moscow, 1968, p 575

11.

V. Rybin, V. Malyshevskiy, and V. Oleinik, Structural Transformations in the Secondary Hardening of Low Carbon Alloy Steels, FMM, 1976, 41(4), p 796–804

12.

E. Zasimchuk, L. Markashova, O. Baskova, T. Turchak, N. Chausov, V. Hutsaylyuk, and V. Berezin, Influence of Combined Loading on Microstructure and Properties of Aluminum Alloy 2024-T3, J. Mater. Eng. Perform., 2013, 22(11), p 3421–3429CrossRef

13.

L.K. Gordienko (ed.), Sverhmelkoe zerno v metallah (Super Fine Grains in Metals) (Metallurgia, Moscow, 1973)

14.

N.J. Petch, The Cleavage Strength of Polycrystals, J. Iron. Steel. Inst., 1953, 174, p 25–28

15.

E. Orowan, Dislocations in Metals, AIME, New York, 1954 (131)

16.

A. Kelly and R. Nicholson, Dispersion Hardening, Moscow, Metalurgia, 1966

17.

L.I. Markashova, S.V. Akhonin, G.M. Grigorenko, M.G. Kruglenko, O.S. Kushnareva, and I.K. Petrichenko, Structure and Properties of Welded Joints of Titanium Alloys, Containing Silicon Additions, Paton Weld. J., 2012, 11, p 6–15

18.

L.I. Markashova and O.S. Kushnareva, Effect of Structure on the Mechanical Properties of the Metal of Welded Joints of Aluminum Alloys of the Al–Cu–Li System, Mater. Sci., 2014, 49(5), p 681–687CrossRef

Titel: Influence of Impact-Oscillatory Loading upon the Mechanical Properties of the VT-22 Titanium Alloy Sheet
verfasst von: M. G. Chausov
A. P. Pylypenko
V. B. Berezin
L. I. Markashova
O. S. Kushnariova
V. B. Hutsaylyuk
Publikationsdatum: 24.06.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 8/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2188-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2016

High-Temperature Interaction Between Molten AlSr10 Alloy and Glass-Like Carbon Substrate

Erratum to: Initiation of Stress Corrosion Cracks in X80 and X100 Pipe Steels in Near-Neutral pH Environment

Fabrication of TiC-Reinforced Composites by Vacuum Arc Melting: TiC Mode of Reprecipitation in Different Molten Metals and Alloys

Influence of Rheological and Thermal Properties of Polymers During Melt Spinning on Bicomponent Fiber Morphology

Hematite Core Nanoparticles with Carbon Shell: Potential for Environmentally Friendly Production from Iron Mining Sludge

Editorial

Premium Partner

Marktübersichten