Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 9/2016

29.07.2016

Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy

verfasst von: H. R. Bakhsheshi-Rad, E. Hamzah, S. Bagheriyan, M. Daroonparvar, M. Kasiri-Asgarani, A. M. Shah, M. Medraj

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 9/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A triplex plasma (NiCoCrAlHfYSi/Al2O3·13%TiO2)/polycaprolactone composite coating was successfully deposited on a Mg-1.2Ca alloy by a combination of atmospheric plasma spraying and dip-coating techniques. The NiCoCrAlHfYSi (MCrAlHYS) coating, as the first layer, contained a large number of voids, globular porosities, and micro-cracks with a thickness of 40-50 μm, while the Al2O3·13%TiO2 coating, as the second layer, presented a unique bimodal microstructure with a thickness of 70-80 μm. The top layer was a hydrophobic polymer, which effectively sealed the porosities of plasma layers. The results of micro-hardness and bonding strength tests showed that the plasma coating presented excellent hardness (870 HV) and good bonding strength (14.8 MPa). However, the plasma/polymer coatings interface exhibited low bonding strength (8.6 MPa). The polymer coating formed thick layer (100-110 μm) that homogeneously covered the surface of the plasma layers. Contact angle measurement showed that polymer coating over plasma layers significantly decreased surface wettability. The corrosion current density (i corr) of an uncoated sample (262.7 µA/cm2) decreased to 76.9 µA/cm2 after plasma coatings were applied. However, it was found that the i corr decreased significantly to 0.002 µA/cm2 after polymer sealing of the porous plasma layers.
Vorheriger Artikel Tribological Properties of the Fe-Al-Cr Alloyed Layer by Double Glow Plasma Surface Metallurgy
Nächster Artikel Deformation Mechanism and Microstructure Evolution of T92/S30432 Dissimilar Welded Joint During Creep

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
D.K. Ivanou, M. Starykevich, A.D. Lisenkov et al., Plasma anodized ZE41 magnesium alloy sealed with hybrid epoxy-silane coating, Corros. Sci., 2013, 73, p 300–308CrossRef
2.
S.V. Gnedenkov, S.L. Sinebryukhov, D.V. Mashtalyar et al., Composite polymer-containing protective coatings on magnesium alloy MA8, Corros. Sci., 2014, 85, p 52–59CrossRef
3.
J. Zhou, Q. Li, H. Zhang, and F. Chen, Corrosion behavior of AZ91D magnesium alloy in three different physiological environments, J. Mater. Eng. Perform., 2014, 23, p 181–186CrossRef
4.
N.G. Wang, R.C. Wang, C.Q. Peng, and Y. Feng, Corrosion behavior of magnesium alloy AP65 in 3.5 % sodium chloride solution, J. Mater. Eng. Perform., 2012, 21, p 1300–1308CrossRef
5.
E. Ghali, W. Dietzel, and K.U. Kainer, General and localized corrosion of magnesium alloys: a critical review, J. Mater. Eng. Perform., 2013, 22, p 2875–2891CrossRef
6.
M.C. Lopes de Oliveira, V.S. Marques Pereira, O.V. Correa, and R.A. Antunes, Corrosion performance of anodized AZ91D magnesium alloy: effect of the anodizing potential on the film structure and corrosion behavior, J. Mater. Eng. Perform., 2014, 23, p 593–603CrossRef
7.
M. Daroonparvar, M.A.M. Yajid, N.M. Yusof et al., Investigation of three steps of hot corrosion process in Y2O3 stabilized ZrO2 coatings including nano zones, J. Rare Earths, 2014, 32, p 989–1002CrossRef
8.
H.R. Bakhsheshi-Rad, E. Hamzah, S. Farahany, and M. Staiger, The Mechanical Properties and Corrosion Behavior of Quaternary Mg–6Zn–0.8Mn–xCa Alloys, J. Mater. Eng. Perform., 2015, 24, p 598–608CrossRef
9.
D. Wang, Z. Tian, S. Wang, L. Shen, and Z. Liu, Microstructural characterization of Al2O3–13 wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy, Surf. Coat. Technol., 2014, 254, p 195–201CrossRef
10.
H. Jamali, R. Mozafarinia, R. Shoja-Razavi, and R. Ahmadi-Pidani, Comparison of hot corrosion behaviors of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings exposure to molten vanadium pentoxide and sodium sulfate, J. Eur. Ceram. Soc., 2014, 34, p 485–492CrossRef
11.
Y. Chen, D. Wu, G. Ma, W. Lu, and D. Guo, Coaxial laser cladding of Al2O3-13%TiO2 powders on Ti–6Al–4 V alloy, Surf. Coat. Technol, 2013, 228, p S452–S455CrossRef
12.
X. Fan, Y. Liu, Z. Xu, Y. Wang et al., Preparation and Characterization of 8YSZ Thermal Barrier Coatings on Rare Earth-Magnesium Alloy, J. Therm. Spray Technol., 2011, 20, p 948–957CrossRef
13.
X. Fan, B. Zou, L. Gu, C. Wang, Y. Wang et al., Investigation of the bond coats for thermal barrier coatings on Mg alloy, Appl. Surf. Sci., 2013, 265, p 264–273CrossRef
14.
K.A. Unocic and B.A. Pint, Characterization of the alumina scale formed on a commercial MCrAlYHfSi coating, Surf. Coat. Technol., 2010, 205, p 1178–1182CrossRef
15.
C. Wang, B. Jiang, M. Liu, and Y. Ge, Corrosion characterization of micro-arc oxidization composite electrophoretic coating on AZ31B magnesium alloy, J. Alloys Compd., 2015, 621, p 53–61CrossRef
16.
W. Tian, Y. Wang, T. Zhang, and Y. Yang, Sliding wear and electrochemical corrosion behavior of plasma sprayed nanocomposite Al2O3–13%TiO2 coatings, Mater. Chem. Phys., 2009, 118, p 37–45CrossRef
17.
Y. Wang, W. Tian, T. Zhang, and Y. Yang, Microstructure, spallation and corrosion of plasma sprayed Al2O3–13%TiO2 coatings, Corros. Sci., 2009, 51, p 2924–2931CrossRef
18.
E.J. Lee, S.H. Teng, T.S. Jang, P. Wang et al., Nanostructured poly(ε-caprolactone)–silica xerogel fibrous membrane for guided bone regeneration, Acta Biomater., 2010, 6, p 3557–3565CrossRef
19.
H.M. Wong, K.W.K. Yeung, K.O. Lam et al., A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants, Biomaterials, 2010, 31, p 2084–2096CrossRef
20.
C. Zhou, X. Lu, Z. Xin, J. Liu, and Y. Zhang, Polybenzoxazine/SiO2 nanocomposite coatings for corrosion protection of mild steel, Corros. Sci., 2014, 80, p 269–275CrossRef
21.
F.Y. Teng, I.C. Tai, M.W. Wang et al., The structures, electrochemical and cell performance of titania films formed on titanium by micro-arc oxidation, J. Taiwan Inst. Chem. Eng, 2014, 45, p 1331–1337CrossRef
22.
M. Mezbahul-Islam, Y.N. Zhang, C. Shekhar, and M. Medraj, Critical assessment and thermodynamic modeling of Mg–Ca–Zn system supported by key experiments, Calphad, 2014, 46, p 134–147CrossRef
23.
H.Y. Tok, E. Hamzah, and H.R. Bakhsheshi-Rad, The role of bismuth on the microstructure and corrosion behavior of ternary Mg–1.2Ca–xBi alloys for biomedical applications, J. Alloys Compd., 2015, 640, p 335–346CrossRef
24.
M. Daroonparvar, M.A.M. Yajid, N.M. Yusof et al., Microstructural characterization and corrosion resistance evaluation of nanostructured Al and Al/AlCr coated Mg–Zn–Ce–La alloy, J. Alloys Compd., 2014, 615, p 657–671CrossRef
25.
H.R. Bakhsheshi-Rad, M.H. Idris, M.R.A. Kadir, and S. Farahany, Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys, Mater. Des., 2012, 33, p 88–97CrossRef
26.
R. Ghasemi, R.S. Razavi, R. Mozafarinia, and H. Jamali, The influence of laser treatment on thermal shock resistance of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings, Ceram. Int., 2014, 40, p 347–355CrossRef
27.
H.R. Bakhsheshi-Rad, E. Hamzah, M.R. Abdul-Kadir, S.N. Saud, M. Kasiri-Asgarani, and R. Ebrahimi-Kahrizsangi, The mechanical properties and corrosion behavior of double-layered nano hydroxyapatite–polymer coating on Mg–Ca alloy, J. Mater. Eng. Perform., 2015, 24, p 4010–4021CrossRef
28.
M.R.L. Estarki, H. Edris, R.S. Razavi et al., Spray drying of nanometric SYSZ powders to obtain plasma sprayable nanostructured granules, Ceram. Int., 2013, 39, p 9447–9457CrossRef
29.
D. Wang, Z. Tian, L. Shen, Z. Liu, and Y. Huang, Microstructural characteristics and formation mechanism of Al2O3–13 wt.% TiO2 coatings plasma-sprayed with nanostructured agglomerated powders, Surf. Coat. Technol., 2009, 203, p 1298–1303CrossRef
30.
H. Luo, D. Goberman, L. Shaw, and M. Gell, Indentation fracture behavior of plasma-sprayed nanostructured Al2O3–13wt.%TiO2 coatings, Mater. Sci. Eng. A, 2003, 346, p 237–245CrossRef
31.
W. Tian, Y. Wang, Y. Yang, and C. Li, Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3–13 wt.%TiO2 coatings, Surf. Coat. Technol., 2009, 204, p 642–649CrossRef
32.
C.G. Li, Z.S. Yu, Y.F. Zhang, P.L. Zhang, H. Yan et al., Microstructure evolution of laser remelted Al2O3–13 wt.%TiO2 coatings, J. Alloys Compd., 2013, 576, p 187–194CrossRef
33.
R.S. Lima and B.R. Marple, Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review, J. Therm. Spray Technol, 2007, 16, p 40–63CrossRef
34.
M. Lebourg, J.S. Antón, and J.L.G. Ribelles, Characterization of calcium phosphate layers grown on polycaprolactone for tissue engineering purposes, Compos. Sci. Technol., 2010, 70, p 1796–1804CrossRef
35.
X.J. Cui, X.Z. Lin, C.H. Liu et al., Fabrication and corrosion resistance of a hydrophobic micro-arc oxidation coating on AZ31 Mg alloy, Corros. Sci., 2015, 90, p 402–412CrossRef
36.
H.R. Bakhsheshi-Rad, E. Hamzah, A.F. Ismail et al., Synthesis and corrosion behavior of a hybrid bioceramic–biopolymer coating on biodegradable Mg alloy for orthopaedic implants, J. Alloys Compd., 2015, 648, p 1067–1071CrossRef
37.
C. Lamuta, G. Di Girolamo, and L. Pagnotta, Microstructural, mechanical and tribological properties of nanostructured YSZ coatings produced with different APS process parameters, Ceram. Int., 2015, 41, p 8904–8914CrossRef
38.
G. Wu, A. Shanaghi, Y. Zhao, X. Zhang et al., The effect of interlayer on corrosion resistance of ceramic coating/Mg alloy substrate in simulated physiological environment, Surf. Coat. Technol., 2012, 206, p 4892–4898CrossRef
39.
H.R. Bakhsheshi-Rad, E. Hamzah, M.R.A. Kadir et al., Corrosion and mechanical performance of double-layered nano-Al/PCL coating on Mg–Ca–Bi alloy, Vacuum, 2015, 119, p 95–98CrossRef
40.
M. Sababi, J. Pan, P.E. Augustsson, P.E. Sundell, and P.M. Claesson, Influence of polyaniline and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel, Corros. Sci., 2014, 84, p 189–197CrossRef
41.
H.R. Bakhsheshi-Rad, E. Hamzah, A.F. Ismail et al., Microstructural, mechanical properties and corrosion behavior of plasma sprayed NiCrAlY/nano-YSZ duplex coating on Mg–1.2Ca–3Zn alloy, Ceram. Int., 2015, 41, p 15272–15277CrossRef
42.
B.S. Boroujeny, Design and investigation of TiO2-SiO2 thin films on AISI 316L stainless steel for tribological properties and corrosion protection, J. Adv. Mater. Process, 2015, 3, p 13–24
43.
M. Daroonparvar, M.A. Mat Yajid, N.M. Yusof, H.R. Bakhsheshi-Rad, E. Hamzah, Improvement of corrosion resistance of binary Mg-Ca alloys by using duplex aluminum-chromium coatings, J. Mater. Eng. Perform, 2015, 24, p 2614–2627CrossRef
44.
H.R. Bakhsheshi-Rad, E. Hamzah, M.R.A. Kadir et al., The mechanical properties and corrosion behavior of double-layered nano hydroxyapatite–polymer coating on Mg–Ca alloy, J. Mater. Eng. Perform, 2015, 24, p 4010–4021CrossRef
45.
S.N. Saud, E. Hamzah, T. Abubakar, H.R. Bakhsheshi-Rad et al., Effects of Mn additions on the structure, mechanical properties, and corrosion behavior of Cu-Al-Ni shape memory alloys, J. Mater. Eng. Perform, 2014, 23, p 3620–3629CrossRef
Metadaten
Titel
Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy
verfasst von
H. R. Bakhsheshi-Rad
E. Hamzah
S. Bagheriyan
M. Daroonparvar
M. Kasiri-Asgarani
A. M. Shah
M. Medraj
Publikationsdatum
29.07.2016
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 9/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-016-2247-5

Weitere Artikel der Ausgabe 9/2016

Journal of Materials Engineering and Performance 9/2016 Zur Ausgabe

OriginalPaper

Accurate Descriptions of Hot Flow Behaviors Across β Transus of Ti-6Al-4V Alloy by Intelligence Algorithm GA-SVR

OriginalPaper

Temperature Histories of Structural Steel Welds Calculated Using Solidification-Boundary Constraints

OriginalPaper

Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures

OriginalPaper

Characterization and Damage Evaluation of Coal Tar Pitch Carbon Matrix Used in Carbon/Carbon Composites

OriginalPaper

The Correlation Among Deposition Parameters, Structure and Corrosion Behavior in ZnNi/Nano-SiC Coating

OriginalPaper

Investigation of Microstructure and Mechanical Properties of ECAP-Processed AM Series Magnesium Alloy

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise